Enantioselective Hydrogenation of Activated Aryl Imines Catalyzed by an Iron(II) P-NH-P′ Complex

Co-Catalyzed Asymmetric Hydrogenation. The Same Enantioselection Pattern for Different Mechanisms

The mechanism of the recently reported catalyzed asymmetric hydrogenation of enyne 1 catalyzed by the Co-(R,R)-QuinoxP* complex was studied by DFT. Conceivable pathways for the Co(I)-Co(III) mechanism were computed together with a Co(0)-Co(II) catalytic cycle. It is commonly assumed that the exact nature of the chemical transformations taking place along the actually operating catalytic pathway determine the sense and level of enantioselection of the catalytic reaction. In this work, two chemically different mechanisms reproduced the experimentally observed perfect stereoselection of the same handedness. Moreover, the relative stabilities of the transition states of the stereo induction stages were controlled via exactly the same weak disperse interactions between the catalyst and the substrate.

Structure, reactivity and catalytic properties of manganese-hydride amidate complexes

The high efficiency of widely applied Noyori-type hydrogenation catalysts arises from the N-H moiety coordinated to a metal centre, which stabilizes rate-determining transition states through hydrogen-bonding interactions. It was proposed that a higher efficiency could be achieved by substituting an N-M' group (M' = alkali metals) for the N-H moiety using a large excess of metal alkoxides (M'OR); however, such a metal-hydride amidate intermediate has not yet been isolated. Here we present the synthesis, isolation and reactivity of a metal-hydride amidate complex (HMn-NLi). Kinetic studies show that the rate of hydride transfer from HMn-NLi to a ketone is 24-fold higher than that of the corresponding amino metal-hydride complex (HMn-NH). Moreover, the hydrogenation of N-alkyl-substituted aldimines was realized using HMn-NLi as the active catalyst, whereas HMn-NH is much less effective. These results highlight the superiority of M/NM' bifunctional catalysis over the classic M/NH bifunctional catalysis for hydrogenation reactions.

Iron Dihydride Complex Stabilized by an All-Phosphorus-Based Pincer Ligand and Carbon Monoxide

PNP-pincer-stabilized iron carbonyl dihydride complexes are key intermediates in catalytic hydrogenation and dehydrogenation reactions; however, decomposition through these intermediates has been observed. This inspires the development of a PPP-pincer system that may show improved catalyst stability. In this work, bis[2-(diisopropylphosphino)phenyl]phosphine (or ^iPrPP^HP) is used to react with FeCl₂ under a carbon monoxide (CO) atmosphere to yield trans-(^iPrPP^HP)Fe(CO)Cl₂. A subsequent reaction with NaBH₄ produces syn/anti-(^iPrPP^HP)FeH(CO)Cl or cis,anti-(^iPrPP^HP)Fe(CO)H₂, depending on the amount of NaBH₄ employed. The cis-dihydride complex shows catalytic activity for the conversion of PhCHO to PhCH₂OH (under H₂) or PhCO₂CH₂Ph (under Ar). It also catalyzes the dehydrogenation of PhCH₂OH to PhCHO and PhCO₂CH₂Ph, albeit with limited turnover numbers. A more efficient catalytic process is the dehydrogenation of formic acid to carbon dioxide (CO₂), which can operate under additive-free conditions. Mechanistic investigation suggests that the cis-dihydride complex undergoes protonation with formic acid to release H₂ while forming anti-(^iPrPP^HP)FeH(CO)(OCHO)·HCO₂H, in which the CO ligand has shifted and the formate is hydrogen-bonded to formic acid. The hydrido formate complex loses CO₂ under ambient conditions, completing the catalytic cycle by reforming the cis-dihydride complex.

Electronic insights into aminoquinoline-based PNHN ligands: protonation state dictates geometry while coordination environment dictates N-H acidity and bond strength

A variety of transition metal complexes bearing aminoquinoline PN^HH'-R ligands R = Ph (L1H), Cy (L2H) and their amido analogues are reported for rhodium(I) ([Rh(L1H)(PPh₃)]⁺1 and Rh(L1)(PPh₃) 2), cobalt(II) (Co(L2)(Cl) 3), and iron(II) ([Fe(L1H)₂]²⁺5, Fe(L1)₂6, and [Fe(C₅Me₅)(L1H)]PF₆7). The acid-base and redox properties of the amido complexes 2, 6, and their protio parent complexes 1, and 5 permit the determination of the pK_a and bond dissociation free energy (BDFE) of their N-H bonds while the ligand scaffold is coordinated to metal centres of square planar and octahedral geometry, respectively. From relative concentrations obtained by the use of ³¹P{¹H} NMR spectroscopy, a pK_a^THF value of 14 is calculated for rhodium complex 1, 6.4 for iron complex 5, and 24 for iron complex 7. These data, when combined with elecrochemical potentials obtained via cyclic voltammetry, allow the calculations of BDFE values for the N-H bond of 69 kcal mol^-1 for 1, and of 55 kcal mol^-1 for 5.

Recent Advances in the Enantioselective Synthesis of Chiral Amines via Transition Metal-Catalyzed Asymmetric Hydrogenation

Chiral amines are key structural motifs present in a wide variety of natural products, drugs, and other biologically active compounds. During the past decade, significant advances have been made with respect to the enantioselective synthesis of chiral amines, many of them based on catalytic asymmetric hydrogenation (AH). The present review covers the use of AH in the synthesis of chiral amines bearing a stereogenic center either in the α, β, or γ position with respect to the nitrogen atom, reported from 2010 to 2020. Therefore, we provide an overview of the recent advances in the AH of imines, enamides, enamines, allyl amines, and N-heteroaromatic compounds.

Trans Element-Hydrogen Bonds: A Distinctive Difference Between Transition Metals and Main Group Elements

The change in sign of the interaction force constant between element-hydrogen stretching modes of trans-dihydrides of the d block and p block elements is analyzed for the first time. As the transition metal M approaches group 12, the higher energy symmetric trans-H-M-H vibration ν_sym approaches the energy of the antisymmetric vibration ν_asym. Crossing to group 13 elements E, the trans-H-E-H vibration ν_sym increasingly drops below ν_asym. This reversal is attributed to the d orbital that participates in the H-M-H bonding but is nonbonding in the H-E-H compounds. DFT calculations are used to probe the energetics of isoelectronic triatomic [H-M-H]ⁿ⁺ and [H-E-H]^n- to reveal this trend and also to demonstrate that the magnitude of these interactions (ν_gap) increases down groups 11, 12, and 14 but remains fairly constant for group 13. They are also used to show that this reversal is seen in the transition state for hydride transfer to CO₂ from the model compounds trans-NiH₂(porphyrin) and trans-EH₂(porphyrin), E = Si and Ge in their singlet states.

Enantioselective direct, base-free hydrogenation of ketones by a manganese amido complex of a homochiral, unsymmetrical P–N–P′ ligand

Base-free direct hydrogenation of ketones using a Mn(PNP′)(CO)₂ complex is more enantioselective than that of a related base-activated iron complex.

Iridium-catalyzed asymmetric hydrogenation of N-phosphinoylimine

On catalysis with an iridium tridentate catalyst, prochiral N-phosphinoylimines were hydrogenated with high enantioselectivity and reactivity. An outer-sphere reaction model was proposed in this hydrogenation of CN bonds.

Asymmetric hydrogenation catalyzed by first-row transition metal complexes

This review focuses on asymmetric direct and transfer hydrogenation with first-row transition metal complexes. The reaction mechanisms and the models of enantiomeric induction were summarized and emphasized.

A combined experimental and computational study to decipher complexity in the asymmetric hydrogenation of imines with Ru catalysts bearing atropisomerizable ligands

RuCl₂(P–OP)(N–N) complexes containing an atropisomerizable phosphine–phosphite and a chiral diamine are effective catalyst precursors for the asymmetric hydrogenation of N-aryl imines following an outer-sphere mechanism.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Basis set dependence of S[double bond, length as m-dash]O stretching frequencies and its consequences for IR and VCD spectra predictions

Benchmarking functionals and basis sets for the computational prediction of molecular properties is usually done on very small model systems. Larger organic molecules containing heavier second row atoms are not the typical model structures. We herein present the first survey of basis sets and functionals for the prediction of the IR and VCD spectra of chiral tosylates and sulfinates as we noted drastic deviations between computed harmonic frequencies obtained at B3LYP/6-311++G(2d,p) level of theory and those observed in experimental solution phase IR and VCD spectra. We show that the harmonic frequencies of the asymmetric and symmetric S[double bond, length as m-dash]O stretching modes of tosylates are predicted at significantly too low vibrational frequencies if the employed basis set does not provide higher order polarization functions. The results of our benchmarks show that at least the 6-311G(3df,2dp) basis (or equivalent Dunning and Ahlrichs variants) should be used.

Ni-catalyzed asymmetric hydrogenation of N-aryl imino esters for the efficient synthesis of chiral α-aryl glycines

Chiral α-aryl glycines play a key role in the preparation of some bioactive products, however, their catalytic asymmetric synthesis is far from being satisfactory. Herein, we report an efficient nickel-catalyzed asymmetric hydrogenation of N-aryl imino esters, affording chiral α-aryl glycines in high yields and enantioselectivities (up to 98% ee). The hydrogenation can be conducted on a gram scale with a substrate/catalyst ratio of up to 2000. The obtained chiral N-p-methoxyphenyl α-aryl glycine derivatives are not only directly useful chiral secondary amino acid esters but can also be easily deprotected by treatment with cerium ammonium nitrate for further transformations to several widely used molecules including drug intermediates and chiral ligands. Formation of a chiral Ni-H species in hydrogenation is detected by ¹H NMR. Computational results indicate that the stereo selection is determined during the approach of the substrate to the catalyst.

Chiral α-amino acids find application in the fields of pharmaceutical, biological and synthetic chemistry. Here, the authors report a nickel-catalyzed asymmetric hydrogenation of N-aryl imino esters affording chiral α-aryl glycines in high yields and enantioselectivities.

A One-Step Preparation of Tetradentate Ligands with Nitrogen and Phosphorus Donors by Reductive Amination and Representative Iron Complexes

The synthesis and use of the first examples of unsymmetrical, mixed phosphine donor tripodal NPP₂' ligands N(CH₂CH₂PR₂)₂(CH₂CH₂PPh₂) are presented. The ligands are synthesized via a convenient, one pot reductive amination using 2-(diphenylphosphino)ethylamine and various substituted phosphonium dimers in order to introduce mixed phosphine donors substituted with P/P', those being Ph/Cy (2), Ph/ⁱPr (3), Ph/ⁱBu (4), Ph/o-Tol (5), and Ph/p-Tol (6). Additionally, we have developed the first known synthesis of a symmetrical tripodal NP₃ ligand N(CH₂CH₂PiBu₂)₃ using bench safe ammonium acetate as the lone nitrogen source (7). This new protocol eliminates the use of extremely dangerous nitrogen mustard reagents typically required to synthesize NP₃ ligands. Some of these tetradentate ligands and also P₂NN' ligands N(CH₂-o-C₅H₄N)(CH₂CH₂PR₂)₂ (P₂NN'-Cy, R = Cy; P₂NN'-Ph, R = Ph) prepared by reductive amination using 2-picolylamine are used in the synthesis and reactions of iron complexes. FeCl₂(P₂NN'-Cy) (8) undergoes single halide abstraction with NaBPh₄ to give the trigonal bipyramidal complex [FeCl(P₂NN'-Cy)][BPh₄] (9). Upon exposure to CO(g), complex 9 readily coordinates CO giving [FeCl(P₂NN'-Cy)(CO)][BPh₄] (10), and further treatment with an excess of NaBH₄ results in formation of the hydride complex [Fe(H)(P₂NN'-Cy)(CO)][BPh₄] (11). Our previously reported complex FeCl₂(P₂NN'-Ph) undergoes double halide abstraction with NaBPh₄ in the presence of the coordinating solvent to give [Fe(NCMe)₂(P₂NN'-Ph)][BPh₄]₂ (12). Ligand 3 can be coordinated to FeCl₂, and upon sequential halide abstraction, treatment with NaBH₄, and exposure to an atmosphere of dinitrogen, the dinitrogen hydride complex [Fe(H)(NPP₂'-ⁱPr)(N₂)][BPh₄] (13) is isolated. Our symmetrical NP₃ ligand 7 can also be coordinated to FeCl₂ and, upon exposure to an atmosphere of CO(g), selectively forms [FeCl(NP₃)(CO)][BPh₄] (14) after salt metathesis with NaBPh₄. Complex 14 can be treated with an excess of NaBH₄ to give the hydride complex [Fe(H)(NP₃)(CO)][BPh₄] (15), which can further be deprotonated/reduced to the Fe(0) complex Fe(NP₃)(CO) (16) upon treatment with an excess of KH.

Tackling N-Alkyl Imines with 3d Metal Catalysis: Highly Enantioselective Iron-Catalyzed Synthesis of α-Chiral Amines

A readily activated iron alkyl precatalyst effectively catalyzes the highly enantioselective hydroboration of N‐alkyl imines. Employing a chiral bis(oxazolinylmethylidene)isoindoline pincer ligand, the asymmetric reduction of various acyclic N‐alkyl imines provided the corresponding α‐chiral amines in excellent yields and with up to >99 % ee. The applicability of this base metal catalytic system was further demonstrated with the synthesis of the pharmaceuticals Fendiline and Tecalcet.

A diversity of recently reported methodology for asymmetric imine reduction

This review describes recent developments in enantioselective imine reduction, including related substrates in which a CN bond is the target for reduction, and in situ methods.

Strategies and mechanisms of metal–ligand cooperativity in first-row transition metal complex catalysts

The use of metal–ligand cooperation (MLC) by transition metal bifunctional catalysts has emerged at the forefront of homogeneous catalysis science.