Effective Electron Temperature Measurement Using Time-Resolved Anti-Stokes Photoluminescence

Quantum-mechanical effects in photoluminescence from thin crystalline gold films

Luminescence constitutes a unique source of insight into hot carrier processes in metals, including those in plasmonic nanostructures used for sensing and energy applications. However, being weak in nature, metal luminescence remains poorly understood, its microscopic origin strongly debated, and its potential for unraveling nanoscale carrier dynamics largely unexploited. Here, we reveal quantum-mechanical effects in the luminescence emanating from thin monocrystalline gold flakes. Specifically, we present experimental evidence, supported by first-principles simulations, to demonstrate its photoluminescence origin (i.e., radiative emission from electron/hole recombination) when exciting in the interband regime. Our model allows us to identify changes to the measured gold luminescence due to quantum-mechanical effects as the gold film thickness is reduced. Excitingly, such effects are observable in the luminescence signal from flakes up to 40 nm in thickness, associated with the out-of-plane discreteness of the electronic band structure near the Fermi level. We qualitatively reproduce the observations with first-principles modeling, thus establishing a unified description of luminescence in gold monocrystalline flakes and enabling its widespread application as a probe of carrier dynamics and light-matter interactions in this material. Our study paves the way for future explorations of hot carriers and charge-transfer dynamics in a multitude of material systems.

Crossover from Nonthermal to Thermal Photoluminescence from Metals Excited by Ultrashort Light Pulses

Photoluminescence from metal nanostructures following intense ultrashort illumination is a fundamental aspect of light-matter interactions. Surprisingly, many of its basic characteristics are under ongoing debate. Here, we resolve many of these debates by providing a comprehensive theoretical framework that describes this phenomenon and support it by an experimental confirmation. Specifically, we identify aspects of the emission that are characteristic to either nonthermal or thermal emission, in particular, differences in the spectral and electric field dependence of these two contributions to the emission. Overall, nonthermal emission is characteristic of the early stages of light emission, while the later stages show thermal characteristics. The former dominate only for moderately high illumination intensities for which the electron temperature reached after thermalization remains close to room temperature.

d-Band Hole Dynamics in Gold Nanoparticles Measured with Time-Resolved Emission Upconversion Microscopy

The performance of photocatalysts and photovoltaic devices can be enhanced by energetic charge carriers produced from plasmon decay, and the lifetime of these energetic carriers greatly affects overall efficiencies. Although hot electron lifetimes in plasmonic gold nanoparticles have been investigated, hot hole lifetimes have not been as thoroughly studied in plasmonic systems. Here, we demonstrate time-resolved emission upconversion microscopy and use it to resolve the lifetime and energy-dependent cooling of d-band holes formed in gold nanoparticles by plasmon excitation and by following plasmon decay into interband and then intraband electron-hole pairs.

Total Luminescence Spectroscopy for Quantification of Temperature Effects on Photophysical Properties of Photoluminescent Materials

Quantification of the temperature effects on the optical properties of photoluminescent (PL) materials is important for a fundamental understanding of both materials optical processes and rational PL materials design and applications. However, existing techniques for studying the temperature effects are limited in their information content. Reported herein is a temperature-dependent total photoluminescence (TPL) spectroscopy technique for probing the temperature dependence of materials optical properties. When used in combination with UV-vis measurements, this TPL method enables experimental quantification of temperature effects on fluorophore fluorescence intensity and quantum yield at any combination of excitation and detection wavelengths, including the fluorophore Stokes-shifted and anti-Stokes-shifted fluorescence. All model polyaromatic hydrocarbon (PAH) and xanthene fluorophores exhibited a strong excitation- and emission-wavelength dependence in their temperature effects. However, the heavy-atom effects used for explaining the strong temperature dependence of brominated anthracenes are not operative with xanthene fluorophores that have heavy atom substitutions. The insights from TPL measurements are important not only for enhancing the fundamental understandings of the materials photophysical properties but also for rational measurement design for applications where the temperature sensitivity of the fluorophore fluorescence is critical. An example application is demonstrated for developing a sensitive and robust ratiometric fluorescence thermometric method for in situ real-time monitoring of sample temperatures inside a fluorescence cuvette placed in a temperature-controlled sample holder.

Multi-temperature modeling of femtosecond laser pulse on metallic nanoparticles accounting for the temperature dependences of the parameters

This review considers the fundamental dynamical processes of metal nanoparticles during and after the impact of a femtosecond laser pulse on a nanoparticle, including the absorption of photons. Understanding the sequence of events after photon absorption and their timescales is important for many applications of nanoparticles. Various processes are discussed, starting with optical absorption by electrons, proceeding through the relaxation of the electrons due to electron–electron scattering and electron–phonon coupling, and ending with the dissipation of the nanoparticle energy into the environment. The goal is to consider the timescales, values, and temperature dependences of the electron heat capacity and the electron–phonon coupling parameter that describe these processes and how these dependences affect the electron energy relaxation. Two- and four-temperature models for describing electron–phonon relaxation are discussed. Significant emphasis is paid to the proposed analytical approach to modeling processes during the action of a femtosecond laser pulse on a metal nanoparticle. These consider the temperature dependences of the electron heat capacity and the electron–phonon coupling factor of the metal. The entire process is divided into four stages: (1) the heating of the electron system by a pulse, (2) electron thermalization, (3) electron–phonon energy exchange and the equalization of the temperature of the electrons with the lattice, and (4) cooling of the nanoparticle. There is an appropriate analytical description of each stage. The four-temperature model can estimate the parameters of the laser and nanoparticles needed for applications of femtosecond laser pulses and nanoparticles.

Two-Photon-Excited Single-Molecule Fluorescence Enhanced by Gold Nanorod Dimers

We demonstrate two-photon-excited single-molecule fluorescence enhancement by single end-to-end self-assembled gold nanorod dimers. We employed biotinylated streptavidin as the molecular linker, which connected two gold nanorods in end-to-end fashion. The typical size of streptavidin of around 5 nm separates the gold nanorods with gaps suitable for the access of fresh dyes in aqueous solution, yet small enough to give very high two-photon fluorescence enhancement. Simulations show that enhancements of more than 7 orders of magnitude can be achieved for two-photon-excited fluorescence in the plasmonic hot spots. With such high enhancements, we successfully detect two-photon-excited fluorescence for a common organic dye (ATTO 610) at the single-molecule, single-nanoparticle level.

Experimental characterization techniques for plasmon-assisted chemistry

Plasmon-assisted chemistry is the result of a complex interplay between electromagnetic near fields, heat and charge transfer on the nanoscale. The disentanglement of their roles is non-trivial. Therefore, a thorough knowledge of the chemical, structural and spectral properties of the plasmonic/molecular system being used is required. Specific techniques are needed to fully characterize optical near fields, temperature and hot carriers with spatial, energetic and/or temporal resolution. The timescales for all relevant physical and chemical processes can range from a few femtoseconds to milliseconds, which necessitates the use of time-resolved techniques for monitoring the underlying dynamics. In this Review, we focus on experimental techniques to tackle these challenges. We further outline the difficulties when going from the ensemble level to single-particle measurements. Finally, a thorough understanding of plasmon-assisted chemistry also requires a substantial joint experimental and theoretical effort.

Light emission from plasmonic nanostructures

The mechanism of light emission from metallic nanoparticles has been a subject of debate in recent years. Photoluminescence and electronic Raman scattering mechanisms have both been proposed to explain the observed emission from plasmonic nanostructures. Recent results from Stokes and anti-Stokes emission spectroscopy of single gold nanorods using continuous wave laser excitation carried out in our laboratory are summarized here. We show that varying excitation wavelength and power change the energy distribution of hot carriers and impact the emission spectral lineshape. We then examine the role of interband and intraband transitions in the emission lineshape by varying the particle size. We establish a relationship between the single particle emission quantum yield and its corresponding plasmonic resonance quality factor, which we also tune through nanorod crystallinity. Finally, based on anti-Stokes emission, we extract electron temperatures that further suggest a hot carrier based mechanism. The central role of hot carriers in our systematic study on gold nanorods as a model system supports a Purcell effect enhanced hot carrier photoluminescence mechanism. We end with a discussion on the impact of understanding the light emission mechanism on fields utilizing hot carrier distributions, such as photocatalysis and nanothermometry.

Theory of "Hot" Photoluminescence from Drude Metals

We provide a complete quantitative theory for light emission from Drude metals under continuous wave illumination, based on our recently derived steady-state nonequilibrium electron distribution. We show that the electronic contribution to the emission exhibits a dependence on the emission frequency which is very similar to the energy dependence of the nonequilibrium distribution, and characterize different scenarios determining the measurable emission line shape. This enables the identification of experimentally relevant situations, where the emission lineshapes deviate significantly from predictions based on the standard theory (namely, on the photonic density of states), and enables the differentiation between cases where the emission scales with the metal object surface or with its volume. We also provide an analytic description (which is absent from the literature) of the (polynomial) dependence of the metal emission on the electric field, its dependence on the pump laser frequency, and its nontrivial exponential dependence on the electron temperature, both for the Stokes and anti-Stokes regimes. Our results imply that the emission does not originate from either Fermion statistics (due to e-e interactions), and even though one could have expected the emission to follow boson statistics due to involvement of photons (as in Planck's Black Body emission), it turns out that it deviates from that form as well. Finally, we resolve the arguments associated with the effects of electron and lattice temperatures on the emission, and which of them can be extracted from the anti-Stokes emission.

Anti-Stokes Thermometry in Nanoplasmonics

Whereas heating nanoparticles with light is straightforward, measuring the resulting nanoscale temperature increase is intricate and still a matter of active research in plasmonics, with envisioned applications in nanochemistry, biomedicine, and solar light harvesting, among others. Interestingly, this research line mostly belongs to the optics community today because light is not only used for heating but also often for probing temperature. In this Perspective, I present and discuss recent advances in the search for efficient and reliable thermometry techniques for nanoplasmonic systems by the nano-optics community. I focus on the recently proposed approach based on the spectral measurement of anti-Stokes emission from the plasmonic nanoparticles themselves.

In Situ Photothermal Response of Single Gold Nanoparticles through Hyperspectral Imaging Anti-Stokes Thermometry

Several fields of applications require a reliable characterization of the photothermal response and heat dissipation of nanoscopic systems, which remains a challenging task for both modeling and experimental measurements. Here, we present an implementation of anti-Stokes thermometry that enables the in situ photothermal characterization of individual nanoparticles (NPs) from a single hyperspectral photoluminescence confocal image. The method is label-free, potentially applicable to any NP with detectable anti-Stokes emission, and does not require any prior information about the NP itself or the surrounding media. With it, we first studied the photothermal response of spherical gold NPs of different sizes on glass substrates, immersed in water, and found that heat dissipation is mainly dominated by the water for NPs larger than 50 nm. Then, the role of the substrate was studied by comparing the photothermal response of 80 nm gold NPs on glass with sapphire and graphene, two materials with high thermal conductivity. For a given irradiance level, the NPs reach temperatures 18% lower on sapphire and 24% higher on graphene than on bare glass. The fact that the presence of a highly conductive material such as graphene leads to a poorer thermal dissipation demonstrates that interfacial thermal resistances play a very significant role in nanoscopic systems and emphasize the need for in situ experimental thermometry techniques. The developed method will allow addressing several open questions about the role of temperature in plasmon-assisted applications, especially ones where NPs of arbitrary shapes are present in complex matrixes and environments.

Probing energy dissipation in molecular-scale junctions via surface enhanced Raman spectroscopy: vibrational pumping and hot carrier enhanced light emission

Experimentally resolving the microscopic energy dissipation and redistribution pathways in a molecular-scale junction, the smallest possible nanoelectronic device, is of great current interest. Here we report measurements of the vibrational pumping and light emission processes in current-carrying molecular junctions using surface enhanced Raman spectroscopy. We show that the heating of vibrational modes exhibits distinct features when the molecular junctions are driven by electrical bias or optical power. We further discuss the hot carrier origin of the broadband continuum emission observed in the Raman scattering spectrum.