Halide Size-Selective Binding by Cucurbit[5]uril-Alkali Cation Complexes in the Gas Phase

Encapsulation in Charged Droplets Generates Distorted Host-Guest Complexes

The ability of various hydrogen-bonded resorcinarene-based capsules to bind α,ω-alkylbisDABCOnium (DnD) guests of different lengths was investigated in solution and in the gas-phase. While no host-guest interactions were detected in solution, encapsulation could be achieved in the charged droplets formed during electrospray ionisation (ESI). This included guests, which are far too long in their most stable conformation to fit inside the cavity of the capsules. A combination of three mass spectrometric techniques, namely, collision-induced dissociation, hydrogen/deuterium exchange, and ion-mobility mass spectrometry, together with computational modelling allow us to determine the binding mode of the DnD guests inside the cavity of the capsules. Significant distortions of the guest into horseshoe-like arrangements are required to optimise cation-π interactions with the host, which also adopt distorted geometries with partially open hydrogen-bonding seams when binding longer guests. Such quasi "spring-loaded" capsules can form in the charged droplets during the ESI process as there is no competition between guest encapsulation and ion pair formation with the counterions that preclude encapsulation in solution. The encapsulation complexes are sufficiently stable in the gas-phase - even when strained - because non-covalent interactions significantly strengthen in the absence of solvent.

Stabilization of Guest Molecules inside Cation-Lidded Cucurbiturils Reveals that Hydration of Receptor Sites Can Impede Binding

Docking of alkali metal ions to water-soluble macrocyclic receptors generally reduces the affinity of guest molecules due to competitive binding. The idea that solvation water molecules could display a larger steric hindrance towards guest binding than cations has not been considered to date. We show that the docking of large cations to cucurbit[5]uril (CB5) unexpectedly increases (by a factor of 5-8) the binding of hydrophobic guests, methane and ethane. This is due to the removal of water molecules from the carbonyl portals of CB5 during cation binding, which frees up space for hydrophobe encapsulation. In contrast, smaller cations like sodium protrude deeply into the cavity of CB5 and cause the expected decrease in binding, such that the rational selection of alkali cations allows for a variation of up to a factor of 20 in binding of methane and ethane. The statistical analysis of crystallographic data shows that the cavity volume of CB5 can be enlarged by placing large alkali ions (Rb+ and Cs+ ) centro-symmetrically at the portals. The results reveal a hitherto elusive steric hindrance of solvation water molecules near receptor binding sites, which is pertinent for the design of supramolecular catalysts and the understanding of biological receptors.

Assessing the Use of Host-Guest Chemistry in Conjunction with Cyclic Ion Mobility Separations for the Linkage-Specific Characterization of Human Milk Oligosaccharides

Human milk oligosaccharides (HMOs) are a class of glycans that are highly abundant in human milk and contribute to the healthy growth of an infant's immune system. While new advancements in analytical methodologies have been made in glycomics, the high degree of isomeric heterogeneity and lack of authentic standards have made the high-resolution separation and accurate characterization of linkage positioning of all HMO species very challenging. Herein, we present an evaluation of the use of host-guest chemistry in conjunction with cyclic ion mobility spectrometry-mass spectrometry (cIMS-MS)-based separations for the identification of linkage positioning in three pairs of di-, tetra-, and hexasaccharide HMO isomers that only differ in the positioning of one glycosidic linkage (β1,3 versus β1,4). Suitable hosts, such as α/β cyclodextrins, cucurbit[n]urils (n = 5, 7), crown ethers, cyclic peptides, and an ionophore, were used to assess host-guest inclusion complex formation as well as linkage-specific cIMS-MS trends. Our results indicated a linkage-specific trend for the [M + 2α + 2H]2+ cyclodextrin-based host-guest inclusion complexes where the β1,3 linkage-containing isomers were always higher mobility than the β1,4 linkage-containing ones as well one for the [M + α + β + 2H]2+ complexes where the β1,4 linkage-containing isomers were always higher mobility than the β1,3 linkage-containing ones. We also observed diagnostic mobility fingerprints for the cucurbituril-based complexes. We anticipate that linkage-specific and mobility fingerprint trends can potentially aid in identifying linkage positioning for other HMO isomers as well as in complex human milk samples.

Trapping Alkali Halide Cluster Ions Inside the Cucurbit[7]uril Cavity

In this study, the distinctive behavior of cucurbit[n]uril (CB[n]), which captures a variety of alkali halide clusters inside the cavity during the droplet evaporation, has been investigated by using ion mobility spectrometry-mass spectrometry. Complexes of CB[7] with various alkali chloride cluster cations or anions generated during the electrospray ionization were studied, and their collision cross-section (CCS) values were obtained to determine whether these clusters were trapped inside the cavity or not. It was found that the clusters smaller than a specific critical size were trapped inside the CB[7] cavity in the gas phase, although trapping of alkali halide clusters at the given concentration is supposed to be unfavorable in solution. We suggest that the rapid solvent evaporation rapidly increases ion concentrations and subsequently forms alkali-chloride contact ion pairs; therefore, it may provide a specific environment to enable the formation of the inclusion complexes.

Collision Cross-Section Measurements of Collision-Induced Dissociation Precursor and Product Ions in an FTICR-MS and an IM-MS: A Comparative Study

Sustained off-resonance irradiation-cross-sectional areas by Fourier transform ion cyclotron resonance mass spectrometry (SORI-CRAFTI) is an FTICR-MS strategy to collisionally activate precursor ions and then measure their ion-neutral collision cross sections, as well as those of selected products, at the same time. We benchmarked SORI-CRAFTI using protonated leucine-enkephalin, to excellent agreement (typically within 1-2%) with previous studies performed via collision-induced dissociation-ion mobility (CID-IMS). SORI-CRAFTI was then applied to alkali metal-cationized leucine-enkephalin and compared with CID-IMS via precursor/product cross-section ratios. Qualitative agreement between SORI-CRAFTI and CID-IMS was excellent (again, usually within 1-2%); however, neither SORI-CRAFTI nor CID-IMS could determine if metalated leucine-enkephalin was present in its canonical or zwitterionic form. When SORI-CRAFTI was used on [2.2.2]-cryptand+Cs⁺, SORI activation resulted in a 5% decrease in collision cross section, consistent with migration of the externally bound Cs⁺ into the cryptand's cavity and similar to the cross section observed when electrospraying from an isopropanol-rich solvent. Thus, SORI-CRAFTI is useful for studying gas-phase ion chemistry of small- to medium-sized molecules and host-guest systems.

Ion Mobility and Fourier Transform Ion Cyclotron Resonance Collision Cross Section Techniques Yield Long-Range and Hard-Sphere Results, Respectively

We determined collision cross section (CCS) values for singly and doubly charged cucurbit[n]uril (n = 5-7), decamethylcucurbit[5]uril, and cyclohexanocucurbit[5]uril complexes of alkali metal cations (Li⁺-Cs⁺). These hosts are relatively rigid. CCS values calculated using the projection approximation (PA) for computationally modeled structures of a given host are nearly identical for +1 and +2 complexes, with weak metal ion dependence, whereas trajectory method (TM) calculations of CCS for the same structures consistently yield values 7-10% larger for the +2 complexes than for the corresponding +1 complexes and little metal ion dependence. Experimentally, we measured relative CCS values in SF₆ for pairs of +1 and +2 complexes of the cucurbituril hosts using the cross-sectional areas by Fourier transform ion cyclotron resonance ("CRAFTI") method. At center-of-mass collision energies <∼30 eV, CRAFTI CCS values are sensitive to the relative binding energies in the +1 and +2 complexes, but at collision energies >∼40 eV (sufficient that ion decoherence occurs on essentially every collision) that dependence is not evident. Consistent with the PA calculations, these experiments found that the +2 complex ions have CCS values ranging between 94 and 105% of those of their +1 counterparts (increasing with metal ion size). In contrast, but consistent with the TM CCS calculations, ion mobility measurements of the same complexes at close to thermal energies in much less polarizable N₂ find the CCS of +2 complexes to be in all cases 9-12% larger than those of the corresponding +1 complexes, with little metal ion dependence.

Multi-CRAFTI: Relative Collision Cross Sections from Fourier Transform Ion Cyclotron Resonance Mass Spectrometric Line Width Measurements

Determination of collision cross sections (CCS) using the cross-sectional areas by the Fourier transform ion cyclotron resonance (CRAFTI) technique is limited by the requirement that accurate pressures in the trapping cell of the mass spectrometer must be known. Experiments must also be performed in the energetic hard-sphere regime such that ions decohere after single collisions with neutrals; this limits application to ions that are not much more massive than the neutrals. To mitigate these problems, we have resonantly excited two (or more) ions of different m/z to the same center-of-mass kinetic energy in a single experiment, subjecting them to identical neutral pressures. We term this approach "multi-CRAFTI". This facilitates measurement of relative CCS without requiring knowledge of the pressure and enables determination of absolute CCS using internal standards. Experiments with tetraalkylammonium ions yield CCS in reasonable agreement with the one-ion-at-a-time CRAFTI approach and with ion mobility spectrometry (IMS) when differences in collision energetics are taken into account (multi-CRAFTI generally yields smaller CCS than does IMS due to the higher collision energies employed in multi-CRAFTI). Comparison of multi-CRAFTI and IMS results with CCS calculated from structures computed at the M06-2X/6-31+G* level of theory using projection approximation or trajectory method values, respectively, indicates that the computed structures have CCS increasingly smaller than the experimental CCS as m/z increases, implying the computational model overestimates interactions between the alkyl arms. For ions that undergo similar collisional decoherence processes, relative CCS reach constant values at lower collision energies than do absolute CCS values, suggesting a means of increasing the accessible upper m/z limit by employing multi-CRAFTI.