Kinetics of Propargyl Radical Dissociation

Broadband Rotational Spectroscopy in Uniform Supersonic Flows: Chirped Pulse/Uniform Flow for Reaction Dynamics and Low Temperature Kinetics

ConspectusThe study of gas-phase chemical reactions at very low temperatures first became possible with the development and implementation of the CRESU (French acronym for Reaction Kinetics in Uniform Supersonic Flows) technique. CRESU relies on a uniform supersonic flow produced by expansion of a gas through a Laval (convergent-divergent) nozzle to produce a wall-less reactor at temperatures from 10 to 200 K and densities of 1016-1018 cm-3 for the study of low temperature kinetics, with particular application to astrochemistry. In recent years, we have combined uniform flows with revolutionary advances in broadband rotational spectroscopy to yield an instrument that affords near-universal detection for novel applications in photodissociation, reaction dynamics, and kinetics. This combination of uniform supersonic flows with chirped-pulse Fourier-transform microwave spectroscopy (Chirped-Pulse/Uniform Flow, CPUF) permits detection of any species with a modest dipole moment, thermalized to the uniform temperature of the gas flow, with isomer, conformer, and vibrational state specificity. In addition, the use of broadband, high-resolution, and time-dependent (microsecond time scale) micro- and mm-wave spectroscopy makes it an ideal tool for characterizing both transient and stable molecules, as well as studying their spectroscopy and dynamics.In this Account, we review recent advances made using the CPUF technique, including studies of photodissociation, radical-radical reaction dynamics, and low temperature kinetics. These studies highlight both the strength of universal and multiplexed detection and the challenges of coupling it to a high-density collisional environment. Product branching and product evolution as a function of time have been measured for astrochemically relevant systems, relying on the detailed characterization of these flow conditions via experiments and fluid dynamics simulations. In the photodissociation of isoxazole, an unusual heterocyclic molecule with a very low-energy conical intersection, we have identified 7 products in 5 reaction channels and determined the product branching, pointing to both direct and indirect pathways. We have also approached the same system from separated NO and C3H3 reactants to explore a broader range of the potential energy surface, demonstrating the power of multichannel branching measurements for complex radical-radical reactions. We determined the product branching in the C3H2 isomers in the photodissociation of the propargyl radical and identified the importance of a hydrogen atom catalyzed isomerization to the lowest energy cyclic form. This then motivated a study of direct D-H exchange reaction in radicals, in which we demonstrate that it is an important and overlooked pathway for deuterium fractionation in astrochemical environments. Recently, we have shown the measurement of low temperature kinetics inside an extended Laval nozzle, after which a shock-free secondary expansion to low temperature and density affords an ideal environment for detection by rotational spectroscopy. These results highlight the power and potential of the CPUF approach, and future prospects will also be discussed in light of these developments.

Master Equation Study of Hydrogen Abstraction from HCHO by OH Via a Chemically Activated Intermediate

The abstraction reaction of hydrogen from formaldehyde by OH radical plays an important role in formaldehyde oxidation. The reaction involves a bimolecular association to form a chemically activated hydrogen-bonded reaction...

Theoretical Calculations of the 242 nm Absorption of Propargyl Radical

The propargyl radical, the most stable isomer of neutral C₃H₃, is important in combustion reactions, and a number of spectroscopic and reaction dynamics studies have been performed over the years. However, theoretical calculations have never been able to find a state that can generate strong absorption around 242 nm as seen in experiments. In this study, we calculated the low-lying electronic energy levels of the propargyl radical using the highly accurate multireference configuration interaction singles and doubles method with triples and quadruples treated perturbatively [denoted as MRCISD(TQ)]. Calculations indicate that this absorption can be attributed to a Franck-Condon-allowed electronic transition from the ground ²B₁ state to the Rydberg-like excited state 1²A₁. Further insight into the behavior of the multireference perturbative theory methods, GVVPT2 and GVVPT3, on a very challenging system are also obtained.

Hierarchical Study of the Reactions of Hydrogen Atoms with Alkenes: A Theoretical Study of the Reactions of Hydrogen Atoms with C2-C4 Alkenes

The present study complements our previous studies of the reactions of hydrogen atoms with C₅ alkene species including 1- and 2-pentene and the branched isomers (2-methyl-1-butene, 2-methyl-2-butene, and 3-methyl-1-butene), by studying the reactions of hydrogen atoms with C₂–C₄ alkenes (ethylene, propene, 1- and 2-butene, and isobutene). The aim of the current work is to develop a hierarchical set of rate constants for Ḣ atom addition reactions to C₂–C₅ alkenes, both linear and branched, which can be used in the development of chemical kinetic models. High-pressure limiting and pressure-dependent rate constants are calculated using the Rice–Ramsperger–Kassel–Marcus (RRKM) theory and a one-dimensional master equation (ME). Rate constant recommendations for Ḣ atom addition and abstraction reactions in addition to alkyl radical decomposition reactions are also proposed and provide a useful tool for use in mechanisms of larger alkenes for which calculations do not exist. Additionally, validation of our theoretical results with single-pulse shock-tube pyrolysis experiments is carried out. An improvement in species mole fraction predictions for alkene pyrolysis is observed, showing the relevance of the present study.

Thermal Decomposition Kinetics of the Indenyl Radical: A Theoretical Study

Quantum chemistry and statistical reaction rate theory calculations have been performed to investigate the products and kinetics of indenyl radical decomposition. Three competitive product sets are identified, including formation of a cyclopentadienyl radical (c-C₅H₅) and diacetylene (C₄H₂), which has not been included in prior theoretical kinetics investigations. Rate coefficients for indenyl decomposition are determined from master equation simulations at 1800-2400 K and 0.01-100 atm, and temperature- and pressure-dependent rate coefficient expressions are incorporated into a detailed chemical kinetic model for indene pyrolysis. Indenyl is found to predominantly decompose to o-benzyne (o-C₆H₄) + propargyl (C₃H₃), with lesser amounts of fulvenallenyl (C₇H₅) + C₂H₂ and c-C₅H₅ + C₄H₂.

Thermal Decomposition of Benzyl Radicals: Kinetics and Spectroscopy in a Shock Tube

Understanding the mechanism of high-temperature reactions of aromatic hydrocarbons and radicals is essential for the modeling of hydrocarbon growth processes in combustion environments. In this study, the thermal decomposition reaction of benzyl radicals was investigated using time-resolved broadband cavity-enhanced absorption spectroscopy behind reflected shock waves at a postshock pressure of 100 kPa and temperatures of 1530, 1630, and 1740 K. The transient absorption spectra during the decomposition were recorded over the spectral range of 282-410 nm. The spectra were contributed by the absorption of benzyl radicals and some transient and residual absorbing species. The temporal behavior of the absorption was analyzed using a kinetic model to determine the rate constant for benzyl decomposition. The obtained rate constants can be represented by the Arrhenius expression k₁ = 1.1 × 10¹² exp(-30 500 K/T) s^-1 with an estimated logarithmic uncertainty of Δlog₁₀ k = ±0.2. Kinetic simulation of the secondary reactions indicated that fulvenallenyl radicals are potentially responsible for the transient absorption that appeared around 400 nm. This assignment is consistent with the available spectroscopic information of this radical. Possible candidates for the residual absorbing species are presented, suggesting the potential importance of ortho-benzyne as a reactive intermediate.

Pressure-Dependent Kinetics of the Reaction between CH3OO and OH Focusing on the Product Yield of Methyltrioxide (CH3OOOH)

The reaction kinetics of methyl peroxy radical (CH₃OO) and hydroxyl radical (OH) has attracted an increasing level of interest in the past decade, while the branching yields of various product channels are still under debate. In this work, a comprehensive theoretical effort was made to investigate the branching yield of the stabilized methyltrioxide (CH₃OOOH, TRIOX) adduct, which has recently been a research focus. Our computed branching ratio of TRIOX at 298 K and 760 Torr is ∼0.04, in agreement with the result of multiplexed photoionization mass spectrometry. We show that the large branching yield obtained in an early theoretical study mainly originated from the collision-induced strong stabilization presented in their simulation. Our findings clarify the controversial product yield results for this important species in recent studies. The computed rate constants over wide temperature and pressure ranges allow better integration of this reaction into global atmospheric models and low-temperature combustion kinetic models.

Isomer-specific detection in the UV photodissociation of the propargyl radical by chirped-pulse mm-wave spectroscopy in a pulsed quasi-uniform flow

Isomer-specific detection and product branching fractions in the UV photodissociation of the propargyl radical is achieved through the use of chirped-pulse Fourier-transform mm-wave spectroscopy in a pulsed quasi-uniform flow (CPUF). Propargyl radicals are produced in the 193 nm photodissociation of 1,2-butadiene. Absorption of a second photon leads to H atom elimination giving three possible C₃H₂ isomers: singlets cyclopropenylidene (c-C₃H₂) and propadienylidene (l-C₃H₂), and triplet propargylene (³HCCCH). The singlet products and their appearance kinetics in the flow are directly determined by rotational spectroscopy, but due to the negligible dipole moment of propargylene, it is not directly monitored. However, we exploit the time-dependent kinetics of H-atom catalyzed isomerization to infer the branching to propargylene as well. We obtain the overall branching among H loss channels to be 2.9% (+1.1/-0.5) l-C₃H₂ + H, 16.8% (+3.2/-1.3) c-C₃H₂ + H, and 80.2 (+1.8/-4.2) ³HCCCH + H. Our findings are qualitatively consistent with earlier RRKM calculations in that the major channel in the photodissociation of the propargyl radical at 193 nm is to ³HCCCH + H; however, a greater contribution to the energetically most favorable isomer, c-C₃H₂ + H is observed in this work. We do not detect the predicted HCCC + H₂ channel, but place an upper bound on its yield of 1%.

Theoretical Kinetics Analysis for Ḣ Atom Addition to 1,3-Butadiene and Related Reactions on the Ċ4H7 Potential Energy Surface

The oxidation chemistry of the simplest conjugated hydrocarbon, 1,3-butadiene, can provide a first step in understanding the role of polyunsaturated hydrocarbons in combustion and, in particular, an understanding of their contribution toward soot formation. On the basis of our previous work on propene and the butene isomers (1-, 2-, and isobutene), it was found that the reaction kinetics of Ḣ-atom addition to the C═C double bond plays a significant role in fuel consumption kinetics and influences the predictions of high-temperature ignition delay times, product species concentrations, and flame speed measurements. In this study, the rate constants and thermodynamic properties for Ḣ-atom addition to 1,3-butadiene and related reactions on the Ċ₄H₇ potential energy surface have been calculated using two different series of quantum chemical methods and two different kinetic codes. Excellent agreement is obtained between the two different kinetics codes. The calculated results including zero-point energies, single-point energies, rate constants, barrier heights, and thermochemistry are systematically compared among the two quantum chemical methods. 1-Methylallyl (Ċ₄H₇1-3) and 3-buten-1-yl (Ċ₄H₇1-4) radicals and C₂H₄ + Ċ₂H₃ are found to be the most important channels and reactivity-promoting products, respectively. We calculated that terminal addition is dominant (>80%) compared to internal Ḣ-atom addition at all temperatures in the range 298-2000 K. However, this dominance decreases with increasing temperature. The calculated rate constants for the bimolecular reaction C₄H₆ + Ḣ → products and C₂H₄ + Ċ₂H₃ → products are in excellent agreement with both experimental and theoretical results from the literature. For selected C₄ species, the calculated thermochemical values are also in good agreement with literature data. In addition, the rate constants for H atom abstraction by Ḣ atoms have also been calculated, and it is found that abstraction from the central carbon atoms is the dominant channel (>70%) at temperatures in the range of 298-2000 K. Finally, by incorporating our calculated rate constants for both Ḣ atom addition and abstraction into our recently developed 1,3-butadiene model, we show that laminar flame speed predictions are significantly improved, emphasizing the value of this study.

Variational transition state theory: theoretical framework and recent developments

This article reviews the fundamentals of variational transition state theory (VTST), its recent theoretical development, and some modern applications.

The near-infrared spectrum of ethynyl radical

Transient diode laser absorption spectroscopy has been used to measure three strong vibronic bands in the near infrared spectrum of the C2H, ethynyl, radical not previously observed in the gas phase. The radical was produced by ultraviolet excimer laser photolysis of either acetylene or (1,1,1)-trifluoropropyne in a slowly flowing sample of the precursor diluted in inert gas, and the spectral resolution was Doppler-limited. The character of the upper states was determined from the rotational and fine structure in the observed spectra and assigned by measurement of ground state rotational combination differences. The upper states include a (2)Σ(+) state at 6696 cm(-1), a second (2)Σ(+) state at 7088 cm(-1), and a (2)Π state at 7110 cm(-1). By comparison with published calculations [R. Tarroni and S. Carter, J. Chem. Phys 119, 12878 (2003); Mol. Phys. 102, 2167 (2004)], the vibronic character of these levels was also assigned. The observed states contain both X(2)Σ(+) and A(2)Π electronic characters. Several local rotational level perturbations were observed in the excited states. Kinetic measurements of the time-evolution of the ground state populations following collisional relaxation and reactive loss of the radicals formed in a hot, non-thermal, population distribution were made using some of the strong rotational lines observed. The case of C2H may be a good place to investigate the behavior at intermediate pressures of inert colliders, where the competition between relaxation and reaction can be tuned and observed to compare with master equation models, rather than deliberately suppressed to measure thermal rate constants.

On the absolute photoionization cross section and dissociative photoionization of cyclopropenylidene

We report the determination of the absolute photoionization cross section of cyclopropenylidene, c-C₃H₂, and the heat of formation of the C₃H radical and ion derived by the dissociative ionization of the carbene.

Pressure-dependent rate constants for PAH growth: formation of indene and its conversion to naphthalene

Unraveling the mechanisms for growth of polycyclic aromatic hydrocarbons (PAHs) requires accurate temperature- and pressure-dependent rate coefficients for a great variety of feasible pathways. Even the pathways for the formation of the simplest PAHs, indene and naphthalene, are fairly complex. These pathways provide important prototypes for modeling larger PAH growth. In this work we employ the ab initio RRKM theory-based master equation approach to predict the rate constants involved in the formation of indene and its conversion to naphthalene. The reactions eventually leading to indene involve C₉H_x (x = 8–11) potential energy surfaces (PESs) and include C₆H₅ + C₃H₄ (allene and propyne), C₆H₆ + C₃H₃, benzyl + C₂H₂, C₆H₅ + C₃H₆, C₆H₆ + C₃H₅ and C₆H₅ + C₃H₅. These predictions allow us to make a number of valuable observations on the role of various mechanisms. For instance, we demonstrate that reactions which can significantly contribute to the formation of indene include phenyl + allene and H-assisted isomerization to indene of its major product, 3-phenylpropyne, benzyl + acetylene, and the reactions of the phenyl radical with propene and the allyl radical, both proceeding via the 3-phenylpropene intermediate. 3-Phenylpropene can be activated to a 1-phenylallyl radical, which in turn rapidly decomposes to indene. Next, indene can be converted to benzofulvene or naphthalene under typical combustion conditions, via its activation by H atom abstraction and methyl substitution on the five-membered ring followed by isomerization and decomposition of the resulting 1-methylindenyl radical, C₁₀H₉ → C₁₀H₈ + H. Alternatively, the same region of the C₁₀H₉ PES can be accessed through the reaction of benzyl with propargyl, C₇H₇ + C₃H₃ → C₁₀H₁₀ → C₁₀H₉ + H, which therefore can also contribute to the formation of benzofulvene or naphthalene. Benzofulvene easily transforms to naphthalene by H-assisted isomerization. An analysis of the effect of pressure on the reaction outcome and relative product yields is given, and modified Arrhenius fits of the rate constants are reported for the majority of the considered reactions. Ultimately, the implementation of such expressions in detailed kinetic models will help quantify the role of these reactions for PAH growth in various environments.