Anomalous Kinetics of Diffusion-Controlled Defect Annealing in Irradiated Ionic Solids

Calculation of Temperature Fields in a Lithium Ceramic Pebble Bed during Reactor Irradiation in a Vacuum

Two-phase lithium ceramic Li2TiO3-Li4SiO4 is considered as a tritium multiplier for use in the solid blanket of fusion reactors. To date, the most accurate understanding of the processes of tritium and helium production and release occurring in the breeder blanket materials under neutron irradiation can only be obtained from experiments in fission research reactors. At that, irradiations in vacuum give the possibility to register even very fast gas release processes (bursts) from the ceramics' voids and pores, although it reduces the thermal conductivity of the pebble bed. The purpose of this work was to simulate the heating of mono-sized pebble bed (1 mm in diameter) of two-phase lithium ceramic 25 mol%Li2TiO3+75 mol%Li4SiO4 in an ampoule device during neutron irradiation at the WWR-K research reactor under vacuum conditions, and to determine experimental parameters in order to prevent heating of the lithium ceramics up to the Li4SiO4-Li2SiO3 phase transition temperatures (>900 °C). For the first time, it was obtained that the effective thermal conductivity of a 1 mm mono-sized pebble bed of 25 mol%Li2TiO3+75 mol%Li4SiO4 significantly decreases (four times) when it is irradiated with neutrons in a vacuum (at a helium pressure of approximately 10 Pa), compared to a similar calculation at 100 kPa of helium (when the He sweep is used). It was concluded that it is difficult to evaluate the maximal temperature of the ceramics in the capsule by measuring the temperature of its outer metal wall (according to thermocouple readings) without using the results of thermophysical calculations for each type of ceramic, taking into account its quantity, specific heat release and pebble size(s). To control the temperature of the ceramics during an irradiation experiment in a vacuum, an in-capsule thermocouple should be used, placed in the center of the pebble bed. Measuring the temperature of the pebble bed based on the capsule wall temperature can lead to overheating of the ceramics and phase changes.

Optical Characteristics of MgAl2O4 Single Crystals Irradiated by 220 MeV Xe Ions

In In this study, the optical properties of magnesium-aluminate spinel were examined after being irradiated with 220 MeV Xe ions. The research aimed to simulate the impact of nuclear fuel fission fragments on the material. The following measurements were taken during the experiments: transmission spectra in the IR region (190-7000) nm, optical absorption spectra in the range (1.2-6.5) eV, and Raman spectra were measured along the depth of ion penetration from the surface to 30 µm. A peak with a broad shape at approximately 5.3 eV can be observed in the optical absorption spectrum of irradiated spinel crystals. This band is linked to the electronic color centers of F+ and F. Meanwhile, the band with a maximum at ~(3-4) eV is attributed to hole color centers. Apart from the typical Raman modes of an unirradiated crystal, additional modes, A1g* (720 cm-1), and Eg* (385 cm-1), manifested mainly as an asymmetric shoulder of the main Eg mode, are also observed. In addition, the Raman spectroscopy method showed that the greatest disordering of crystallinity occurs in the near-surface layer up to 4 μm thick. At the same time, Raman scattering spectroscopy is sensitive to structural changes almost up to the simulated value of the modified layer, which is an excellent express method for certifying the structural properties of crystals modified by swift heavy ions.

Toward Elucidating the Influence of Hydrostatic Pressure Dependent Swelling Behavior in the CERCER Composite

A ceramic-ceramic (CERCER) fuel with minor actinide-enriched ceramic fuel particles dispersed in a MgO ceramic matrix is chosen as a promising composite target for accelerator-driven systems (ADS). Fission swelling is a complex irradiation-induced phenomenon that involves recrystallization, resolution, and hydrostatic pressure under extreme conditions of high temperature and significant fission flux. In this study, a multiscale computational framework was developed to integrate simulations of continuum-scale thermo-mechanical behavior in the CERCER composite with a grain-scale hydrostatic pressure-dependent fission gas swelling model. Hydrostatic pressure-dependent fission welling is taken into account in the stress update algorithms for UO2 particles. Accordingly, we programmed the user subroutines to define the thermo-mechanical constitutive relations in the finite element simulations. The obtained results indicate that (1) the proposed method accurately predicts the swelling deformation at various burnup levels while taking into account hydrostatic pressure and (2) prior to recrystallization, the particle swelling is primarily influenced by temperature variation, whereas after recrystallization, the presence of hydrostatic pressure favorably suppresses the swelling deformation. This work effectively captures the swelling behavior influenced by hydrostatic pressure within the dispersed-type CERCER composite fuel in ADSs.

Paramagnetic Defects and Thermoluminescence in Irradiated Nanostructured Monoclinic Zirconium Dioxide

The ESR spectra of nanostructured samples of monoclinic ZrO₂ irradiated by electrons with energies of 130 keV, 10 MeV, and by a beam of Xe ions (220 MeV) have been studied. It has been established that irradiation of samples with electrons (10 MeV) and ions leads to the formation of radiation-induced F⁺ centers in them. Thermal destruction of these centers is observed in the temperature range of 375-550 K for electron-irradiated and 500-700 K for ion-irradiated samples. It is shown that the decrease in the concentration of F⁺ centers is associated with the emptying of traps responsible for thermoluminescence (TL) peaks in the specified temperature range. In the samples irradiated with an ion beam, previously unidentified paramagnetic centers with g = 1.963 and 1.986 were found, the formation of which is likely to involve Zr³⁺ ions and oxygen vacancies. Thermal destruction of these centers occurs in the temperature range from 500 to 873 K.

Crystalline Orientation-Dependent Ferromagnetism in N+-Implanted MgO Single Crystal

Samples of (110), (100), and (111) MgO single crystals were implanted with 70 keV N ions at room temperature. All as-implanted samples showed room temperature hysteresis in magnetization loops. The observed saturation magnetization (Ms) was 0.79 × 10−4 emu/g, 1.28 × 10−4 emu/g, and 1.5 × 10−4 emu/g for (110), (100) and (111) orientation implanted-MgO and follows the relation Ms(111) > Ms(100) > Ms(110), indicative of crystalline orientation-dependent ferromagnetism in N-implanted MgO. The samples were characterized by X-ray photoelectron spectroscopy (XPS), high resolution X-ray diffraction (HRXRD), reciprocal space mapping (RSM), and photoluminescence (PL). The results indicated that the amount of N-substitute-O and N-interstitial defects in these three N-implanted MgO samples showed the same changing tendency as compared with Ms data. Thus, we conclude that the N-substitute-O and N-interstitial defects may play a crucial role in controlling the N+-implanted-induced ferromagnetism.

Investigation of the Efficiency of Shielding Gamma and Electron Radiation Using Glasses Based on TeO2-WO3-Bi2O3-MoO3-SiO to Protect Electronic Circuits from the Negative Effects of Ionizing Radiation

This article considers the effect of MoO₃ and SiO additives in telluride glasses on the shielding characteristics and protection of electronic microcircuits operating under conditions of increased radiation background or cosmic radiation. MoO₃ and SiO dopants were chosen because their properties, including their insulating characteristics, make it possible to avoid breakdown processes caused by radiation damage. The relevance of the study consists in the proposed method of using protective glasses to protect the most important components of electronic circuits from the negative effects of ionizing radiation, which can cause failures or lead to destabilization of the electronics. Evaluation of the shielding efficiency of gamma and electron radiation was carried out using a standard method for determining the change in the threshold voltage (∆U) value of microcircuits placed behind the shield and subjected to irradiation with various doses. It was established that an increase in the content of MoO₃ and SiO in the glass structure led to an increase of up to 90% in the gamma radiation shielding efficiency, while maintaining the stability of microcircuit performance under prolonged exposure to ionizing radiation. The results obtained allow us to conclude that the use of protective glasses based on TeO₂-WO₃-Bi₂O₃-MoO₃-SiO is highly promising for creating local protection for the main components of microcircuits and semiconductor devices operating under conditions of increased background radiation or cosmic radiation.

Study of Morphological, Structural, and Strength Properties of Model Prototypes of New Generation TRISO Fuels

The purpose of this work is to characterize the morphological, structural, and strength properties of model prototypes of new-generation TRi-structural ISOtropic particle fuel (TRISO) designed for Generation IV high-temperature gas reactors (HTGR-type). The choice of model structures consisting of inner pyrolytic carbon (I-PyC), silicon carbide (SiC), and outer pyrolytic carbon (O-PyC) as objects of research is motivated by their potential use in creating a new generation of fuel for high-temperature nuclear reactors. To fully assess their full functional value, it is necessary to understand the mechanisms of resistance to external influences, including mechanical, as in the process of operation there may be external factors associated with deformation and leading to the destruction of the surface of fuel structures, which will critically affect the service life. The objective of these studies is to obtain new data on the fuel properties, as well as their resistance to external influences arising from mechanical friction. Such studies are necessary for further tests of this fuel on corrosion and irradiation resistance, as closely as possible to real conditions in the reactor. The research revealed that the study samples have a high degree of resistance to external mechanical influences, due to the high strength of the upper layer consisting of pyrolytic carbon. The presented results of the radiation resistance of TRISO fuel testify to the high resistance of the near-surface layer to high-dose irradiation.

Ion-Track Template Synthesis and Characterization of ZnSeO3 Nanocrystals

ZnSeO3 nanocrystals with an orthorhombic structure were synthesized by electrochemical and chemical deposition into SiO2/Si ion-track template formed by 200 MeV Xe ion irradiation with the fluence of 107 ions/cm2. The lattice parameters determined by the X-ray diffraction and calculated by the CRYSTAL computer program package are very close to each other. It was found that ZnSeO3 has a direct band gap of 3.8 eV at the Γ-point. The photoluminescence excited by photons at 300 nm has a low intensity, arising mainly due to zinc and oxygen vacancies. Photoluminescence excited by photons with a wavelength of 300 nm has a very low intensity, presumably due to electronic transitions of zinc and oxygen vacancies.

Ge Ion Implanted Photonic Devices and Annealing for Emerging Applications

Germanium (Ge) ion implantation into silicon waveguides will induce lattice defects in the silicon, which can eventually change the crystal silicon into amorphous silicon and increase the refractive index from 3.48 to 3.96. A subsequent annealing process, either by using an external laser or integrated thermal heaters can partially or completely remove those lattice defects and gradually change the amorphous silicon back into the crystalline form and, therefore, reduce the material’s refractive index. Utilising this change in optical properties, we successfully demonstrated various erasable photonic devices. Those devices can be used to implement a flexible and commercially viable wafer-scale testing method for a silicon photonics fabrication line, which is a key technology to reduce the cost and increase the yield in production. In addition, Ge ion implantation and annealing are also demonstrated to enable post-fabrication trimming of ring resonators and Mach–Zehnder interferometers and to implement nonvolatile programmable photonic circuits.

Evidence for the formation of two types of oxygen interstitials in neutron-irradiated α-Al2O3 single crystals

Due to unique optical/mechanical properties and significant resistance to harsh radiation environments, corundum (α-Al₂O₃) is considered as a promising candidate material for windows and diagnostics in forthcoming fusion reactors. However, its properties are affected by radiation-induced (predominantly, by fast neutrons) structural defects. In this paper, we analyze thermal stability and recombination kinetics of primary Frenkel defects in anion sublattice − the F-type electronic centers and complementary oxygen interstitials in fast-neutron-irradiated corundum single crystals. Combining precisely measured thermal annealing kinetics for four types of primary radiation defects (neutral and charged Frenkel pairs) and the advanced model of chemical reactions, we have demonstrated for the first time a co-existence of the two types of interstitial defects – neutral O atoms and negatively charged O^- ions (with attributed optical absorption bands peaked at energies of 6.5 eV and 5.6 eV, respectively). From detailed analysis of interrelated kinetics of four oxygen-related defects, we extracted their diffusion parameters (interstitials serve as mobile recombination partners) required for the future prediction of secondary defect-induced reactions and, eventually, material radiation tolerance.

Gamma radiation-induced defects in KCl, MgCl2, and ZnCl2 salts at room temperature

Room temperature post-irradiation measurements of diffuse reflectance and electron paramagnetic resonance spectroscopies were made to characterize the long-lived radiation-induced species formed from the gamma irradiation of solid KCl, MgCl2, and ZnCl2 salts up to 100 kGy. The method used showed results consistent with those reported for electron and gamma irradiation of KCl in single crystals. Thermal bleaching of irradiated KCl demonstrated accelerated disaggregation of defect clusters above 400 K, due to decomposition of Cl3-. The defects formed in irradiated MgCl2 comprised a mixture of Cl3-, F-centers, and Mg+ associated as M-centers. Further, Mg metal cluster formation was also observed at 100 kGy, in addition to accelerated destruction of F-centers above 20 kGy. Irradiated ZnCl2 afforded the formation of Cl2- due to its high ionization potential and crystalline structure, which decreases recombination. The presence of aggregates in all cases indicates the high diffusion of radicals and the predominance of secondary processes at 295 K. Thermal bleaching studies showed that chloride aggregates' stability increases with the ionization potential of the cation present. The characterization of long-lived radiolytic transients of pure salts provides important information for the understanding of complex salt mixtures under the action of gamma radiation.

Distinctive features of diffusion-controlled radiation defect recombination in stoichiometric magnesium aluminate spinel single crystals and transparent polycrystalline ceramics

MgAl₂O₄ spinel is important optical material for harsh radiation environment and other important applications. The kinetics of thermal annealing of the basic electron (F, F⁺) and hole (V) centers in stoichiometric MgAl₂O₄ spinel irradiated by fast neutrons and protons is analyzed in terms of diffusion-controlled bimolecular reactions. Properties of MgAl₂O₄ single crystals and optical polycrystalline ceramics are compared. It is demonstrated that both transparent ceramics and single crystals, as well as different types of irradiation show qualitatively similar kinetics, but the effective migration energy E_a and pre-exponent D₀ are strongly correlated. Such correlation is discussed in terms of the so-called Meyer-Neldel rule known in chemical kinetics of condensed matter. The results for the irradiated spinel are compared with those for sapphire, MgO and other radiation-resistant materials.