Generation and Stability of the gem-Diol Forms in Imidazole Derivatives Containing Carbonyl Groups. Solid-State NMR and Single-Crystal X-ray Diffraction Studies

Structure and Electron Configuration of Imidazole-2-carboxaldehyde and Its Excited Triplet: Resonance Raman and Transient Absorption Spectroscopy and DFT Calculation Investigations

Imidazole-2-carboxaldehyde (IC) can be generated in atmospheric waters and absorbs solar radiation in the near UV region to produce its excited triplet state (3IC), which contributes to the formation of a secondary organic aerosol (SOA). The photoreactivity of IC is significantly influenced by its surroundings, such as water and acidic environment, because IC is capable of transforming into gem-diol under above conditions. Meanwhile, the electron configuration of 3IC is critical in elucidating the reaction mechanism of 3IC with other anthropogenic and biogenic volatile organic compounds (VOCs). In this study, steady-state and time-resolved resonance Raman as well as transient absorption spectroscopic experiments were conducted to provide vibrational and kinetic information on IC and 3IC in the presence of water and acid conditions. Using density functional theory (DFT) calculations, the H-bonding at the carbonyl O was confirmed and the hydrated structure of IC and 3IC was determined. 1,4-Cyclohexadiene is a good hydrogen donor, and it has a second-order rate constant of ∼107 M-1 s-1 toward 3IC. The results of CASSCF calculations suggest that the hydrogen abstraction may involve the transition from the ππ* to nπ* triplet state via the surface-crossing point.

Chiral MOF Derived Wearable Logic Sensor for Intuitive Discrimination of Physiologically Active Enantiomer

Chiral sensors have attracted growing interest due to their application in health monitoring. However, rational design of wearable logic chiral sensors remains a great challenge. In this work, a dual responsive chiral sensor RT@CDMOF is prepared through in situ self-assembly of chiral γ-cyclodextrin metal-organic framework (CDMOF), rhodamine 6G hydrazide (RGH), and tetracyanovinylindane (TCN). The embedded RGH and TCN inherit the chirality of host CDMOF, producing dual changes both in fluorescence and reflectance. RT@CDMOF is explored as a dual channel sensor for chiral discrimination of lactate enantiomers. Comprehensive mechanistic studies reveal the chiral binding process, and carboxylate dissociation is confirmed by impedance and solid-state 1 H nuclear magnetic resonance (NMR). A flexible membrane sensor is successfully fabricated based on RT@CDMOF for wearable health monitoring. Practical evaluation confirms the potential of fabricated membrane sensor in point-of-care health monitoring by indexing the exercise intensity. Based on above, a chiral IMPLICATION logic unit can be successfully achieved, demonstrating the promising potential of RT@CDMOF in design and assembly of novel smart devices. This work may open a new avenue to the rational design of logic chiral sensors for wearable health monitoring applications.

Hemiacetal-based dynamic systems: a new mechanistic insight

The formation of hemiacetals from pyrazine trifluoromethylketone as a model receptor and four simple alcohols was studied by using quantum chemical calculations and NMR spectroscopy. Free energy profiles for four types of mechanistic pathways were calculated and discussed with respect to kinetic and thermodynamic measurements. We show that hemiacetal formation is facilitated by an assisted proton transfer process via a pseudo eight-membered transition state which brings the theory and experiment into close agreement. Also, a newly proposed mechanistic pathway for hemiacetal formation via a five-membered transition state leading to zwitterionic intermediates is discussed. Direct proton transfer in a pseudo four-membered transition state can be ruled out due to the high energy of transition states with respect to other mechanistic pathways. We also show that in the case of hemiacetals, water and alcohol molecules cannot account sufficiently for the H-transfer process via six-membered transition states.

Shared Hydrogen Atom Location and Chemical Composition in Picolinic Acid and Pyridoxal Hydrochloride Derivatives Determined by X-ray Crystallography

Three new single-crystal structures were isolated for picolinic acid (2), the trifluoroacetate salt of picolinic acid (1), and pyridoxal hydrochloride (3). These compounds displayed unconventional crystallographic features that must be considered when structural refinements are carried out. Thus, the generated Fourier differences map obtained with the diffraction data collected at 100 K was crucial to visualize electron densities, which were balanced by either one hydrogen atom or a hydrogen atom with an occupancy factor of 1/2 located between either two carboxylate moieties, two phenolic oxygen atoms, or two pyridinic nitrogen atoms. Moreover, NMR studies were conducted to analyze the bulk chemical composition of single crystals of 2-pyridinecarboxylic acid obtained from the gem-diol/hemiacetal forms and the polymerization products after the treatment of 2-pyridinecarboxaldehyde with TFA:H₂O (1) or a diluted Cu(NO₃)₂ solution (2). The quantitative yield of the pyridoxal hydrochloride crystalline material (3) obtained from a diluted CuCl₂ solution was exhaustively characterized by solid-state NMR methods. These methods allowed the resolution of the signals corresponding to the protons of the hydroxyl moiety of the intramolecular hemiacetal group and the phenolic hydrogen. Theoretical calculations using DFT methods were done to complement the atomic location of the hydrogen atoms obtained from the X-ray analysis.

Formaldehyde Analysis in Non-Aqueous Methanol Solutions by Infrared Spectroscopy and Electrospray Ionization

We present the analysis of formaldehyde (HCHO) in anhydrous methanol (CH3OH) as a case study to quantify HCHO in non-aqueous samples. At higher concentrations (C > 0.07 M), we detect a product of HCHO, methoxy methanol (MM, CH3OCH2OH), by Fourier transform infrared spectroscopy, FTIR. Formaldehyde reacts with CH3OH, CD3OH, and CD3OD as shown by FTIR with a characteristic spectral feature around 1,195 cm-1 for CH3OH used for the qualitative detection of MM, a formaldehyde derivative in neat methanol. Ab initio calculations support this assignment. The extinction coefficient for 1,195 cm-1 is in the order of 1.4 × 102 M-1cm-1, which makes the detection limit by FTIR in the order of 0.07 M. For lower concentrations, we performed the quantitative analysis of non-aqueous samples by derivatization with dinitrophenylhydrazine (DNPH). The derivatization uses an aqueous H2SO4 solution to yield the formaldehyde derivatized hydrazone. Ba(OH)2 removes sulfate ions from the derivatized samples and a final extraction with isobutyl acetate to yield a 1:1 methanol: isobutyl acetate solvent for injection for electrospray ionization (ESI). The ESI analysis gave a linear calibration curve for concentrations from 10 to 200 µM with a time-of-flight analyzer (TOF). The detection and quantification limits are 7.8 and 26 μM, respectively, for a linear correlation with R 2 > 0.99. We propose that the formaldehyde in CH3OH is in equilibrium with the MM species, without evidence of HCHO in solution. In the presence of water, the peaks for MM become less resolved, as expected from the well-known equilibria of HCHO that favors the formation of methylene glycol and polymeric species. Our results show that HCHO, in methanol does not exist in the aldehyde form as the main chemical species. Still, HCHO is in equilibrium between the production of MM and the formation of hydrated species in the presence of water. We demonstrate the ESI-MS analysis of HCHO from a non-aqueous TiO2 suspension in methanol. Detection of HCHO after illumination of the colloid indicates that methanol photooxidation yields formaldehyde in equilibrium with the solvent.

Paramagnetic solid-state NMR assignment and novel chemical conversion of the aldehyde group to dihydrogen ortho ester and hemiacetal moieties in copper(ii)- and cobalt(ii)-pyridinecarboxaldehyde complexes

The complex chemical functionalization of aldehyde moieties in Cu(ii)- and Co(ii)-pyridinecarboxaldehyde complexes was studied. X-ray studies demonstrated that the aldehyde group (RCHO) of the four pyridine molecules is converted to dihydrogen ortho ester (RC(OCH₃)(OH)₂) and hemiacetal (RCH(OH)(OCH₃)) moieties in both 4-pyridinecarboxaldehyde copper and cobalt complexes. In contrast, the aldehyde group is retained when the 3-pyridinecarboxaldehyde ligand is complexed with cobalt. In the different copper complexes, similar paramagnetic ¹H resonance lines were obtained in the solid state; however, the connectivity with the carbon structure and the ¹H vicinities were done with 2D ¹H–¹³C HETCOR, ¹H–¹H SQ/DQ and proton spin diffusion (PSD) experiments. The strong paramagnetic effect exerted by the cobalt center prevented the observation of ¹³C NMR signals and chemical information could only be obtained from X-ray experiments. 2D PSD experiments in the solid state were useful for the proton assignments in both Cu(ii) complexes. The combination of X-ray crystallography experiments with DFT calculations together with the experimental results obtained from EPR and solid-state NMR allowed the assignment of NMR signals in pyridinecarboxaldehyde ligands coordinated with copper ions. In cases where the crystallographic information was not available, as in the case of the 3-pyridinecarboxaldehyde Cu(ii) complex, the combination of these techniques allowed not only the assignment of NMR signals but also the study of the functionalization of the substituent group.

The complex chemical functionalization of the aldehyde group was elucidated in copper and cobalt complexes for 4- and 3-pyridinecarboxaldehyde ligands.

gem-Diol-Type Intermediate in the Activation of a Ketone on Sn-β Zeolite as Studied by Solid-State NMR Spectroscopy

Lewis acid zeolites have found increasing application in the field of biomass conversion, in which the selective transformation of carbonyl-containing molecules is of particular importance due to their relevance in organic synthesis. Mechanistic insight into the activation of carbonyl groups on Lewis acid sites is challenging and critical for the understanding of the catalytic process, which requires the identification of reaction intermediates. Here we report the observation of a stable surface gem-diol-type species in the activation of acetone on Sn-β zeolite. ¹³ C, ¹¹⁹ Sn, and ¹³ C-¹¹⁹ Sn double-resonance NMR spectroscopic studies demonstrate that only the open Sn site ((SiO)₃ Sn-OH) on Sn-β is responsible for the formation of the surface species. ¹³ C MAS NMR experiments together with density functional theory calculations suggest that the gem-diol-type species exhibits high reactivity and can serve as an active intermediate in the Meerwein-Ponndorf-Verley-Oppenauer (MPVO) reaction of acetone with cyclohexanol. The gem-diol-type species offers an energy-preferable pathway for the direct carbon-to-carbon hydrogen transfer between ketone and alcohol. The results provide new insights into the transformation of carbonyl-containing molecules catalyzed by Lewis acid zeolites.

Direct glucosone-based synthesis and HILIC-ESI-MS/MS characterization of N-terminal fructosylated valine and valylhistidine for validation of enzymatic HbA1c assays in the diagnosis of diabetes mellitus

Naturally occurring fructosamines are of high clinical significance due to their potential use in diabetes mellitus monitoring (quantification of fructosylated hemoglobin, HbA1c) or for the investigation of their reactivity in consecutive reactions and harmfulness towards the organism. Here we report the specific synthesis of the fructosylated dipeptide L-valyl-L-histidine (Fru-Val-His) and fructosylated L-valine (Fru-Val). Both are basic tools for the development and validation of enzymatic HbA1c assays. The two fructosamine derivatives were synthesized via a protected glucosone intermediate which was coupled to the primary amine of Val or Val-His, performing a reductive amination reaction. Overall yields starting from fructose were 36% and 34% for Fru-Val and Fru-Val-His, respectively. Both compounds were achieved in purities > 90%. A HILIC-ESI-MS/MS method was developed for routine analysis of the synthesized fructosamines, including starting materials and intermediates. The presented method provides a well-defined and efficient synthesis protocol with purification steps and characterization of the desired products. The functionality of the fructosylated dipeptide has been thoroughly tested in an enzymatic HbA1c assay, showing its concentration-dependent oxidative degradation by fructosyl-peptide oxidases (FPOX). Graphical abstract.

P-doped carbon nano-powders for fingerprint imaging

A simple, fast, and laboratory efficient doped P carbon nanoparticles synthesis is developed for fingerprint imaging, using 1,3-dihydroxyacetone and di-phosphorous pentoxide. Fluorescence nanoparticles, with an average size of 230 nm were obtained, without additional energy input or external heating. ATR, solid NMR, XPS and fluorescence spectroscopy revealed their surface functionalization; a reaction mechanism is proposed. Fluorescence measurements exhibited a maximum emission band at ca. 495 nm, when excited at 385 nm. The images obtained, on different surfaces such as mobile telephone screen, magnetic band and metallic surface of a credit card and a Euro banknote treated with the obtained nano-powders allows us to record positive matches, confirming that the experimental results illustrate the effectiveness of proposed method.

From light to heavy alkali metal tetraphosphonates (M = Li, Na, K, Rb, Cs): cation size-induced structural diversity and water-facilitated proton conductivity

A family of alkali metal-based frameworks containing the tetraphosphonate linker hexamethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid), HDTMP, exhibiting rich structural diversity and water-dependent proton conductivity.