Pyridine-Diketopyrrolopyrrole-Based Novel Metal-Free Visible-Light Organophotoredox Catalyst for Atom-Transfer Radical Polymerization

Fabrication and properties of temperature-responsive imprinted sensors based on fluorescently labeled yeast cells via MVL ATRP

Temperature-responsive yeast cell-imprinted sensors (CIPs/AuNPs/Ti3C2Tx/AuNPs/Au) were prepared based on fluorescein isothiocyanate labeled yeast cells (FITC-yeast) via metal-free visible-light-induced atom transfer radical polymerization (MVL ATRP). Here, N-isopropyl acrylamide (NIPAM) was used as a temperature-responsive functional monomer, α-methacrylic acid (MAA) was chosen as an auxiliary functional monomer, N,N'-methylene bisacrylamide (MBA) was used as a cross-linker, and FITC-yeast was selected as both a template and photocatalyst. Under the optimal conditions, the detection range of the yeast cell-imprinted sensor toward yeast cells was 1.0 × 102 to 1.0 × 109 cells per mL, and the detection limit was 11 cells per mL (S/N = 3), with a linear equation of ΔI (μA) = 8.44 log[C (cells per mL)] + 7.62 (R2 = 0.993). The sensor showed good selective recognition in the presence of interfering substances such as autolyzed yeast cells (AY), dead yeast cells (DY), human mammary epithelial cells (MCF-10A), human breast cancer cells (MCF-7) and Escherichia coli (EC). The sensor also had good consistency and reproducibility. Finally, spiked recovery experiments were performed to investigate the recognition of yeast cells in the actual sample using the yeast cell-imprinted sensor. The spiked recoveries were all in the range of 98.5-108.0%, and the RSD values were all less than 4%, indicating that the sensor had good application prospects.

Fabrication of high-performance cell-imprinted polymers based on AuNPs/MXene composites via metal-free visible light-induced ATRP

Cell-imprinted polymers (CIPs) for yeasts were fabricated via metal-free visible-light-induced atom transfer radical polymerization (MVL ATRP) on the surface of a glassy carbon electrode (GCE) which had been modified with gold nanoparticles (AuNPs)/MXene (Ti₃C₂T_x) composites. Here, the AuNPs/Ti₃C₂T_x composites form a macroporous structure, which could improve the electron transfer rate of the materials and facilitate the leaving or rebinding of cells. Methacrylic acid (MAA) and N,N'-methylene bis-acrylamide (MBA) were selected as the functional monomer and cross-linker of CIPs, because they could form efficient hydrogen bonding with mannan from yeast cell walls. The obtained electrode (CIPs/AuNPs/Ti₃C₂T_x/GCE) was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Further experiments indicated that the CIPs/AuNPs/Ti₃C₂T_x/GCE electrode could be utilized as an electrochemical biosensor to determine yeast cells by differential pulse voltammetry (DPV). The linear response range was 1.0 × 10² to 1.0 × 10⁹ cells per mL and the detection limit was 20 cells per mL (S/N = 3). The CIPs/AuNPs/Ti₃C₂T_x/GCE electrode also showed good selectivity, repeatability, reproducibility, and regeneration. Finally, the proposed sensor was used to detect yeast cells in commercial samples of Saccharomyces boulardii sachets by a standard addition method. The obtained recovery was from 96.9 to 104.8% showing its potential applications in clinical and diagnostic research.

Latest Advances in Highly Efficient Dye-Based Photoinitiating Systems for Radical Polymerization

Light-activated polymerization is one of the most important and powerful strategies for fabrication of various types of advanced polymer materials. Because of many advantages, such as economy, efficiency, energy saving and being environmentally friendly, etc., photopolymerization is commonly used in different fields of science and technology. Generally, the initiation of polymerization reactions requires not only light energy but also the presence of a suitable photoinitiator (PI) in the photocurable composition. In recent years, dye-based photoinitiating systems have revolutionized and conquered the global market of innovative PIs. Since then, numerous photoinitiators for radical polymerization containing different organic dyes as light absorbers have been proposed. However, despite the large number of initiators designed, this topic is still relevant today. The interest towards dye-based photoinitiating systems continues to gain in importance, which is related to the need for new initiators capable of effectively initiating chain reactions under mild conditions. In this paper we present the most important information about photoinitiated radical polymerization. We describe the main directions for the application of this technique in various areas. Attention is mainly focused on the review of high-performance radical photoinitiators containing different sensitizers. Moreover, we present our latest achievements in the field of modern dye-based photoinitiating systems for the radical polymerization of acrylates.

A Pyridine Diketopyrrolopyrrole-Grafted Graphene Oxide Nanocomposite for the Sensitive Detection of Chloramphenicol by a Direct Electrochemical Method

A novel direct electrochemical sensor, based on a pyridine diketopyrrolopyrrole/graphene oxide nanocomposite-modified glass carbon electrode (PDPP/GO/GCE), was developed herein for chloramphenicol (CAP) detection. In this research, PDPP was grafted onto GO by C-N bonds and π-π conjugation, which were synergistically confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The morphology study shows that PDPP was uniformly dispersed on the GO in the form of particles. The constructed PDPP/GO/GCE showed the strongest response signal to CAP in the evaluation of electrocatalytic activity by cyclic voltammetry compared to that of GO-modified and unmodified GCE, revealing that the introduction of PDPP can effectively improve the electrocatalytic activity of sensors. Moreover, PDPP/GO/GCE had a noticeable current signal when the concentration of CAP was as low as 0.001 uM and had a wide line range (0.01-780 uM) with a low limit of detection (1.64 nM). The sensor properties of the as-obtained PDPP/GO/GCE involved anti-interference, reproducibility, and stability, which were also evaluated and revealed satisfactory results.

Sensitive detection of 4-nitrophenol based on pyridine diketopyrrolopyrrole-functionalized graphene oxide direct electrochemical sensor

For highly sensitive detection of 4-nitrophenol (4-NP) in the environment, a novel pyridine diketopyrrolopyrrole-functionalized graphene oxide (PDPP-GO) composite was constructed for the first time by an improved Hummers' method. Herein, PDPP was completely dissolved in sulfuric acid (6 mol L^-1) and reacted with GO, promoting PDPP evenly adhering to the GO surface. Moreover, the specific surface area increased from 15.51 to 22.033 m² g^-1. Infrared spectroscopy and X-ray photoelectron spectroscopy simultaneously demonstrated that PDPP was bound to GO by the strong intermolecular hydrogen bonding and π-π stacking conjugation. During the cyclic voltammetry test, the PDPP-GO coated glassy carbon electrode (PDPP-GO/GCE) direct electrochemical sensor gave expression to the best electrocatalytic activity for 4-nitrophenol detection than GO/GCE and bare GCE. Under optimization conditions, the as-prepared PDPP-GO/GCE sensor brought out remarkable sensitivities of 18.54 (0.5-50 μM) and 6.61 μA μM^-1 cm^-2 (50-163 μM) in the linear detection of 4-NP. Besides, a low detection limit of 0.10 μM, reliable long-term stability, excellent selectivity, and reproducibility were obtained. In the real sample test, the PDPP-GO/GCE demonstrated sensitive and reliable determination.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Metal-Free Organocatalyzed Atom Transfer Radical Polymerization: Synthesis, Applications, and Future Perspectives

Reversible deactivation radical polymerization (RDRP) is a class of powerful techniques capable of synthesizing polymers with a well-defined structure, properties, and functionalities. Among the available RDRPs, ATRP is the most investigated. However, the necessity of a metal catalyst represents a drawback and limits its use for some applications. O-ATRP emerged as an alternative to traditional ATRP that uses organic compounds that catalyze polymerization under light irradiation instead of metal. The friendly nature and the robustness of O-ATRP allow its use in the synthesis of tailorable advanced materials with unique properties. In this review, the fundamental aspects of the reductive and oxidative quenching mechanism of O-ATRP are provided, as well as insights into each component and its role in the reaction. Besides, the breakthrough recent studies that applied O-ATRP for the synthesis of functional materials are presented, which illustrate the significant potential and impact of this technique across diverse fields.

Beyond C3N4 π-conjugated metal-free polymeric semiconductors for photocatalytic chemical transformations

Photocatalysis with stable, efficient and inexpensive metal-free catalysts is one of the most promising options for non-polluting energy production. This review article covers the state-of-the-art development of various effective metal-free polymeric photocatalysts with large π-conjugated units for chemical transformations including water splitting, CO2 and N2 reduction, organic synthesis and monomer polymerisation. The article starts with the catalytic mechanisms of metal-free photocatalysts. Then a particular focus is on the rational manipulation of π-conjugation enlargement, charge separation, electronic structures and band structures in the design of metal-free polymeric photocatalysts. Following the design principles, the selection and construction of functional units are discussed, as well as the connecting bonds and dimensions of π-conjugated polymeric photocatalysts. Finally the hot and emerging applications of metal-free polymeric photocatalysts for photocatalytic chemical transformations are summarized. The strategies provide potential avenues to address the challenges of catalyst activity, selectivity and stability in the further development of highly effective metal-free polymeric photocatalysts.

Unpaired Electron-Induced Wide-Range Light Absorption within Zn (or Cu) MOFs Containing Electron-Withdrawing Ligands: A Theoretical and Experimental Study

In photocatalysis, it is of general interest to understand and design wide-range light-absorbing inorganic/organic hybrid materials with an excellent photo-induced intramolecular charge-transfer (ICT) effect. To verify the role of unpaired electrons in enhancing ICT within electron-withdrawing ligand-based metal-organic frameworks (MOFs), the molecular structure, density of states (DOS), and electronic structure of strong electron-deficient pyridine-diketopyrrolopyrrole (P-DPP)-based Zn (or Cu) MOFs were calculated in Gaussian package to validate the unpaired electron ICT. The electron spin resonance technique has detected the unpaired electrons for the coordination systems containing Zn-O or Cu-O clusters and P-DPP ligand on photoexcitation. The estimated band gaps from the DOS calculation for P-DPP-Cu and P-DPP-Zn are 1.4 and 2.4 eV, respectively, showing a good agreement with the experimental UV-vis optical spectra. The partial DOS, dipole moment, and frontier orbital analysis prove that the ICT should happen from Zn-O or Cu-O clusters to P-DPP ligands. This research may contribute to a comprehensive understanding of electron-withdrawing ligand-induced ICT within MOFs and shed light on the design of light-absorbing MOFs with excellent ICT or conductivity.