Effects of Surfactant Charge and Molecular Structure on Wettability Alteration of Calcite: Insights from Molecular Dynamics Simulations

Effect of alkyl glucoside concentration on functional group structure and adsorption characteristics of anthracite

CONTEXT

To investigate the influence of different concentrations of surfactants on the adsorption of anthracite, the nonionic surfactant alkyl polyglucoside (APG) was selected. The study examined the adsorption characteristics of different concentrations of APG on the surface of anthracite. The results revealed the existence of two modes of APG adsorption on anthracite. Under the action of 0.06 wt% APG, APG was found to adsorb in a monolayer state on the anthracite surface, with a saturation adsorption capacity of 20.06 mg/g. When the solution concentration exceeded 0.14 wt%, APG exhibited a double-layer saturation adsorption state on anthracite, with a saturation adsorption capacity of 71.71 mg/g. Molecular dynamics simulations complemented these findings, demonstrating that low concentrations of APG could reduce the mobility of water molecules and enhance the hydrophilicity of anthracite. With an increase in the number of APG molecules, multi-layer adsorption occurred on the anthracite surface, making it more hydrophobic. Therefore, the differences in wettability of anthracite induced by different concentrations of APG were primarily attributed to the spatial distribution of the surfactant at the water/coal interface.

METHODS

This study analyzed the adsorption capacity of the surfactant through adsorption experiments and Fourier-transform infrared spectroscopy (FTIR) experiments. Molecular dynamics simulations were conducted to construct six concentration levels of water/APG/anthracite systems. Various aspects, including APG adsorption configurations, interaction energies, relative concentrations of each component, and the diffusion coefficient of water molecules, were discussed to elucidate the reasons for the differential wettability of anthracite induced by different concentrations of APG.

Hydration effects on the vibrational properties of carboxylates: From continuum models to QM/MM simulations

The presence of carboxyl groups in a molecule delivers an affinity to metal cations and a sensitivity to the chemical environment, especially for an environment that can give rise to intermolecular hydrogen bonds. Carboxylate groups can also induce intramolecular interactions, such as the formation of hydrogen bonds with donor groups, leading to an impact on the conformational space of biomolecules. In the latter case, the protonation state of the amino groups plays an important role. In order to provide an accurate description of the modifications induced in a carboxylated molecule by the formation of hydrogen bonds, one needs a compromise between a quantum chemical description of the system and the necessity to take into account explicit solvent molecules. In this work, we propose a bottom-up approach to study the conformational space and the carboxylate stretching band of (bio)organic anions. Starting from the anions in a continuum solvent, we then move to calculations using a microsolvation approach including one explicit water molecule per polar group, immersed in a continuum. Finally, we run QM/MM molecular dynamics simulations to analyze the solvation properties and to explore the anions conformational space. The results thus obtained are in good agreement with the description given by the microsolvation approach and they bring a more detailed description of the solvation shell and of the intermolecular hydrogen bonds.

Computational Study on the Microscopic Adsorption Characteristics of Linear Alkylbenzene Sulfonates with Different Chain Lengths on Anthracite Surface

In order to explore the influence of different lengths of hydrophobic carbon chains on the diffusion characteristics of surfactants on the surface of anthracite, six linear alkyl benzene sulfonates with different hydrophobic carbon chain lengths were selected (mC, m = 8, 10, 12, 14, 16, 18; m represents the numbers of carbon atoms in the hydrophobic carbon chain), and molecular dynamics (MD) simulations were adopted. Models of surfactant-anthracite, surfactant-graphite layer, and water-surfactant-anthracite were constructed. After analyzing a series of properties such as adsorption energy, diffusion coefficient, radial distribution function (RDF), and hydrophobic tail order parameters, it was found that 12C had the highest adsorption strength on the surface of anthracite; the reason was that 12C had the highest degree of aggregation near the oxygen-containing functional groups on the surface of anthracite. Further studies had found that the hydrophobic tail chain of 12C had the strongest isotropy. The study fills the gap in the systematic study of the diffusion characteristics of linear alkylbenzene sulfonates (LAS) with different chain lengths on the surface of anthracite, enriches and develops the basic theory of coal wettability, and also provides technical ideas for the design of new surfactants and new dust suppression agents.

Surfactant-induced wettability reversal on oil-wet calcite surfaces: Experimentation and molecular dynamics simulations with scaled-charges

HYPOTHESIS

Surfactant flooding is the leading approach for reversing the wettability of oil-wet carbonate reservoirs, which is critical for the recovery of the remaining oil. Combination of molecular dynamics (MD) simulations with experiments on simplified model systems can uncover the molecular mechanisms of wettability reversal and identify key molecular properties for systematic design of new, effective chemical formulations for the enhanced oil recovery.

EXPERIMENTS/SIMULATIONS

Wettability reversal by a series of surfactant solutions was studied experimentally using contact angle measurements on aged calcite chips, and a novel MD simulation methodology with scaled-charges that provides superior description of the ionic interactions in aqueous solutions.

FINDINGS

The MD simulation results were in excellent agreement with the experiments. Cationic surfactants were the most effective in reversing the calcite wettability, resulting in complete detachment of the oil from the surface. Some nonionic surfactants also altered the wettability, but to a lesser degree, while the amphoteric and anionic surfactants had no effect. From the tested cationic surfactants, the double-tailed one was the least effective, but the experiments were inconclusive due to its poor solubility. Contributions of specific interactions to the wettability reversal process and implications for the design and optimization of surfactants for the enhanced oil recovery are discussed.

Microscopic Diffusion Characteristics of Linear Alkylbenzene Sulfonates on the Surface of Anthracite: The Influence of Different Attachment Sites of Benzene Ring in the Backbone

In order to explore the effect of the attachment site of the benzene ring in the backbone of the surfactant on its diffusion characteristics on the surface of anthracite, the molecular dynamics simulation method was used, and the four isomers (m-C16, m = 2,4,6,8; m represents the attachment site of the benzene ring in the backbone) of sodium hexadecyl benzene sulfonate (SHS) were selected. Binary models of surfactant/anthracite, surfactant/graphene modified by oxygen-containing functional groups, and a ternary model of water/surfactant/anthracite were constructed. By analyzing a series of properties such as interaction energy, contact surface area, relative concentration distribution, radial distribution function, hydrophobic tail chain order parameter, etc., it is concluded that the adsorption strength of 4-C16 on the surface of anthracite is the highest; the reason is that 4-C16 has the highest degree of aggregation near the oxygen-containing functional groups on the surface of anthracite. Further investigations find that 4-C16 can be densely covered on the ketone group, and the longer branch chain of 4-C16 has the highest degree of order in the Z-axis direction.

Geometry transformation of ionic surfactants and adsorption behavior on water/n-decane-interface: calculation by molecular dynamics simulation and DFT study

Understanding the effect of surfactant structure on their ability to modify interfacial properties is of great scientific and industrial interest. In this work, we have synthesized four amide based ionic surfactants under acidic or basic conditions, including CTHA·HCl, CTEA·HCl, CTHA⁻Na⁺ and CTEA⁻Na⁺. Experiments have proved that the anionic surfactant with polyethylene oxide groups (CTEA⁻Na⁺) had the lowest surface tension on the water/n-decane interface. Molecular dynamics simulations have been applied to investigate the structural effect on the adsorption behavior of four different surfactants. The surface tension, interface thickness, interface formation energy, density profiles, order parameters, radial distribution function on the water/n-decane interfaces were calculated and compared. During the equilibrium states, we found that the interface configuration of two cationic surfactants are almost linear while the two anionic surfactants are changed to bending shapes due to the different positions of the hydrophilic head groups. Further DFT study and wavefunction analysis of surfactants have shown that CTEA⁻Na⁺ can form stronger vdW interactions with n-decane molecules due to a more neutral electrostatic potential distribution. Meanwhile, the introduction of polyethylene oxide groups has offered more H-bonding sites and resulted in more concentrated H-bonding interactions with water molecules. The difference of weak interactions may contribute to the conformational change and finally affect the interface properties of these ionic surfactants.

The difference of weak interactions may contribute to the conformational change and finally affect the interface properties of these ionic surfactants.

A review of wettability alteration using surfactants in carbonate reservoirs

The wettability of carbonate rocks is often oil-wet or mixed wet. A large fraction of oil is still remained in carbonate reservoirs, it is therefore of particular significance to implement effective methods to improve oil recovery from carbonate reservoirs. Altering wettability from oil-wet to more favorable water-wet has been proven successful to achieve this goal. Surfactants are widely investigated and served as wettability modifiers in this process. Yet a comprehensive review of altering wettability of carbonate reservoirs with surfactants is ignored in literature. This study begins with illustration of wettability evolution process in carbonate reservoirs. Techniques to evaluate wettability alteration extent or to reveal behind mechanisms are also presented. Several surfactant systems are analyzed in terms of their wettability alteration mechanisms, influential factors of performance, applicable conditions, and limitations. Mixture of different types of surfactants could obtain synergic effects, where applicable conditions are extended, and final performance is improved. Gemini surfactants have many desirable properties, which warrants further investigation for understanding their wettability alteration mechanisms and performance. At the end, this review discusses strategies related with surfactant cost, surfactant adsorption, and challenges at high temperature, high salinity reservoirs conditions. Also, some unclear issues are discussed.