Molecular Packing in Langmuir Monolayers Composed of a Phosphatidylcholine and a Pyrene Lipid

Interfacial Interactions of a Myoglobin/DOPC Hybrid System at the Air-Water Interface and Its Physicochemical Properties

In the present study, the intermolecular interactions between a water-insoluble phospholipid (DOPC) and water-soluble protein (myoglobin) and the interaction among themselves were investigated at the air-water interface using the Langmuir and Langmuir-Blodgett techniques. The effects of changes in physicochemical factors, like pH and temperature, on these interactions were also examined. Surface pressure-molecular area (π-A) isotherms of the DOPC monolayer at the air-water interface, with and without myoglobin (Myo) revealed the evolution of various physical properties, such as elastic, thermodynamic, and hysteric properties, in response to changes in subphase pH and temperature. With the increment of subphase pH from 5 to 7 at a fixed temperature (20 °C), the DOPC isotherm expanded, and the in-plane elasticity (CS-1) decreased, but no significant presence of hysteresis was encountered in either of the pH values. On the other hand, a diminution of temperature (from 20 to 5 °C) leads to an expansion of monolayers yielding low elasticity and significant hysteresis. The incorporation of Myo molecules within the DOPC monolayer decreased the CS-1 value of the DOPC monolayer. Such a decrement in CS-1 was also encountered while increasing the pH and decreasing the temperature (T) of the subphase in the absence of Myo. Systematic expansion of DOPC isotherm and increased hysteric area with the increase in Myo proportion were observed and the atomic force microscopy (AFM) observations suggested a strong conjugation between Myo and DOPC in the mixed monolayer. The denaturation effect of Myo molecules was studied using AFM at different temperatures. Furthermore, the Myo molecules were found to be most surface active at pH = 7, which is very close to its isoelectric point. These observations come up with the interaction mechanism between biomolecules under dynamically varied conditions.

A biophysical study of tear film lipid layer model membranes

The tear film lipid layer (TFLL), the final layer of the human tear film is responsible for surface tension reduction while blinking, water evaporation retardation and maintaining the stability of the tear film. The study of the composition-structure-function relationship of TFLL is paramount, as a compromised structure of TFLL leads to the emergence of dry eye disease (DED) which is one the most prevalent ophthalmic surface diseases of the modern world, associated with chronic pain and reduced visual capability. In this model membrane study, a systematic approach is used to study the biophysical properties of TFLL model membranes as a function of composition. Three mixed-lipid model membranes are studied along with their individual components comprising cholesteryl oleate (CO), glyceryl trioleate (GT), L-α-phosphatidylcholine (egg PC) and a free fatty acid mixture. The models become progressively more complex from binary to quaternary mixtures, allowing the role of each individual lipid to be derived. Langmuir balance, Brewster Angle Microscopy (BAM) and Profile Analysis Tensiometer (PAT) are used to study the surface activity and compression-expansion cycles, morphology, and rheological behaviour of the model membranes, respectively. Evidence of multilayering is observed with inclusion of CO and a reversible collapse is associated with the GT phase transition. An initially more coherent film is observed due to the addition of polar PC. Notably, these individual behaviours are retained in the mixed films and suggest a possible role for each physiological component of TFLL.

Correlation of Physicochemical and Antimicrobial Properties of Liposomes Loaded with (+)-Usnic Acid

(+)-Usnic acid (UA) is a natural substance that displays pharmacological activity, but it is barely soluble in water, so it was included in liposomes in order to study its properties. First, the effects of phospholipid structure and loading methodology on UA entrapment efficacy were evaluated. Then, the physicochemical and biological properties (UA delivery efficacy to Staphylococcus aureus bacterial cells) of different liposome formulations containing structurally related amphiphiles derived from L-prolinol were fully investigated. Entrapment efficiency of UA with passive loading by incubation was 80-100 molar percentage, which is related to lipophilicity of the drug and to the packing and fluidity of the bilayer. Some of the investigated formulations show the potential of UA in delivery systems (minimum inhibitory concentration of liposomal UA: 8 μg/mL) and even subtle variations of the molecular structure of lipids can significantly affect the liposomes' physicochemical properties and efficiency of drug release.

Surface Activities of a Lipid Analogue Room-Temperature Ionic Liquid and Its Effects on Phospholipid Membrane

There are great efforts of synthesizing imidazolium-based ionic liquids (ILs) for developing new antibiotics as these molecules have shown strong antibacterial activities. Compared to a single-hydrocarbon-chained IL, the lipid analogues (LAs) with two chains are more effective. In the present study, the LA molecule ^MeIm(COOH)^Me(Oleylamine)Iodide has been synthesized and its surface activities along with the effectiveness in restructuring of a model cellular membrane have been quantified. The molecule is found to be highly surface active as estimated from the area-pressure isotherm of a monolayer of the molecules formed at the air-water interface. The X-ray reflectivity (XRR) studies of a monolayer dip-coated on a hydrophilic substrate have shown the structural properties of the layer which resembles to those of unsaturated phospholipids. The LA molecules are observed to fluidize a phospholipid bilayer formed by the saturated lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). At a lower surface pressure, the lipid monolayer of DPPC has exhibited a thickening effect at a low concentration of added LA and a thinning effect at higher concentration. However, at a high surface pressure of the monolayer, the thickness is found to decrease monotonically. The in-plane pressure-dependent interaction of LA molecules with model cellular membrane and the corresponding perturbation in the structure and physical properties of the membrane may be linked to the strong lysing effect of these types of molecules.

Mechanical Properties of DPPC-POPE Mixed Langmuir Monolayers

The mechanical properties of lipid monolayers and their responses to shear and compression stresses play an important role in processes such as breathing and eye blinking. We studied the mechanical properties of Langmuir monolayers of a model mixture, composed of an unsaturated lipid, 1-palmitoyl-2-oleoyl-sn-glycero-phosphoethanolamine (POPE), and a saturated lipid, 1,2-dipalmitoyl-sn-glycero-phosphocholine (DPPC). We performed isothermal compressions and sinusoidal shear deformations of these mixed monolayers. Also, the different phases were observed with Brewster angle microscopy. We found that the mechanical behavior is affected by the miscibility of both lipids. In the two-phase region, the compression elastic modulus increases with the amount of the LC phase but does not follow the predictions of a simple effective medium model. The discrepancies arise from the fact that, upon compression, the domains grow at a rate faster than the compression rate but not fast enough to reach thermodynamic equilibrium. Before reaching the LC phase, domain percolation is observed and compression and shear moduli become equal to those of the pure LC phase. Most of the monolayers behave as viscoelastic fluids at the frequencies investigated. A minimum in the compression modulus and shear viscosity was observed for mixtures close to equimolar composition, with the minimum being accompanied by a change in domain shapes.

Reversible Phase Transitions in the Phospholipid Monolayer

The polymorphism of phospholipid monolayers has been extensively studied because of its importance in surface thermodynamics, soft matter physics, and biomembranes. To date, the phase behavior of phospholipid monolayers has been nearly exclusively studied with the classical Langmuir-type film balance. However, because of experimental artifacts caused by film leakage, the Langmuir balance fails to study the reversibility of two-dimensional surface phase transitions. We have developed a novel experimental methodology called the constrained drop surfactometry capable of providing a leakage-proof environment, thus allowing reversibility studies of two-dimensional surface phase transitions. Using dipalmitoylphosphatidylcholine (DPPC) as a model system, we have studied the reversibility of isothermal and isobaric phase transitions in the monolayer. It is found that not only the compression and expansion isotherms but also the heating and cooling isobars, completely superimpose with each other without hysteresis. Microscopic lateral structures of the DPPC monolayer also show reversibility not only during the isothermal compression and expansion processes but also during the isobaric heating and cooling processes. It is concluded that the two-dimensional surface phase transitions in phospholipid monolayers are reversible, which is consistent with the reversibility of phase transitions in bulk pure substances. Our results provide a better understanding of surface thermodynamics, phase change materials, and biophysical studies of membranes and pulmonary surfactants.

Differences in Interactions of Benzoic Acid and Benzoate with Interfaces

The interaction of benzoic acid and benzoate with model membrane systems was characterized to understand the molecular interactions of the two forms of a simple aromatic acid with the components of the membrane. The microemulsion system based on bis(2-ethylhexyl)sulfosuccinate (AOT) allowed determination of the molecular positioning using 1D NMR and 2D NMR spectroscopic methods. Benzoic acid and benzoate were both found to penetrate the membrane/water interfaces; however, the benzoic acid was able to penetrate much deeper and thus is more readily able to traverse a membrane. The Langmuir monolayer model system, using dipalmitoylphosphatidylcholine, was used as a generic membrane lipid for a cell. Compression isotherms of monolayers demonstrated a pH dependent interaction with a lipid monolayer and confirming the pH dependent observations shown in the reverse micellar model system. These studies provide an explanation for the antimicrobial activity of benzoic acid while benzoate is inactive. Furthermore, these studies form the framework upon which we are investigating the mode of bacterial uptake of pyrazinoic acid, the active form of pyrazinamide, a front line drug used to combat tuberculosis.

Phase Transitions in Dipalmitoylphosphatidylcholine Monolayers

A self-assembled phospholipid monolayer at an air-water interface is a well-defined model system for studying surface thermodynamics, membrane biophysics, thin-film materials, and colloidal soft matter. Here we report a study of two-dimensional phase transitions in the dipalmitoylphosphatidylcholine (DPPC) monolayer at the air-water interface using a newly developed methodology called constrained drop surfactometry (CDS). CDS is superior to the classical Langmuir balance in its capacity for rigorous temperature control and leak-proof environments, thus making it an ideal alternative to the Langmuir balance for studying lipid polymorphism. In addition, we have developed a novel Langmuir-Blodgett (LB) transfer technique that allows the direct transfer of lipid monolayers from the droplet surface under well-controlled conditions. This LB transfer technique permits the direct visualization of phase coexistence in the DPPC monolayer. With these technological advances, we found that the two-dimensional phase behavior of the DPPC monolayer is analogous to the three-dimensional phase transition of a pure substance. This study has implications in the fundamental understanding of surface thermodynamics as well as applications such as self-assembled monolayers and pulmonary surfactant biophysics.