Binding of the Cationic Peptide (KL)4K to Lipid Monolayers at the Air–Water Interface: Effect of Lipid Headgroup Charge, Acyl Chain Length, and Acyl Chain Saturation

All-hydrocarbon stapling enables improvement of antimicrobial activity and proteolytic stability of peptide Figainin 2

Figainin 2 is a cationic, hydrophobic, α-helical host-defense peptide with 28 residues, which was isolated from the skin secretions of the Chaco tree frog. It shows potent inhibitory activity against both Gram-negative and Gram-positive pathogens and has garnered considerable interest in developing novel classes of natural antibacterial agents. However, as a linear peptide, conformational flexibility and poor proteolytic stability hindered its development as antibacterial agent. To alleviate its susceptibility to proteolytic degradation and improve its antibacterial activity, a series of hydrocarbon-stable analogs of Figainin 2 were synthesized and evaluated for their secondary structure, protease stability, antimicrobial, and hemolytic activities. Among them, F2-12 showed significant improvement in protease resistance and antimicrobial activity compared to that of the template peptide. This study provides a promising strategy for the development of antimicrobial drugs.

Integrating In Vitro and In Silico Analysis of a Cationic Antimicrobial Peptide Interaction with Model Membranes of Colistin-Resistant Pseudomonas aeruginosa Strains

Bacterial antibiotic resistance is a serious global public health concern. Infections caused by colistin-resistant Pseudomonas aeruginosa (CRPa) strains represent a serious threat due to their considerable morbidity and mortality rates, since most of the current empirical antibiotic therapies are ineffective against these strains. Accordingly, cationic antimicrobial peptides (CAMPs) have emerged as promising alternatives to control resistant bacteria. In this study, the interaction of a CAMP derived from cecropin D-like (∆M2) with model membranes mimicking bacterial biomembranes of wild-type (WTPa) strains of P. aeruginosa and CRPa was evaluated through in vitro and in silico approaches. In vitro interaction was determined by infrared spectroscopy, whereas in silico molecular dynamics was performed to predict specific interactions between amino acids of ∆M2 and lipids of model membrane systems. Experimental analysis showed this peptide interacted with the lipids of bacterial-like model membranes of WTPa and CRPa. In both cases, an increase in the concentration of peptides induced an increase in the phase transition temperature of the lipid systems. On the other hand, the peptides in solution underwent a transition from a random to a helical secondary structure after interacting with the membranes mostly favored in the CRPa system. The α-helix structure percentage for ΔM2 interacting with WTPa and CRPa lipid systems was 6.4 and 33.2%, respectively. Finally, molecular dynamics showed ∆M2 to have the most affinities toward the phospholipids palmitoyl-oleyl-phosphatidylglycerol (POPG) and palmitoyl-oleoyl-phosphatidylethanolamine (POPE) that mimic membranes of WTPa and CRPa, respectively. This work provides clues for elucidating the membrane-associated mechanism of action of ∆M2 against colistin-susceptible and -resistant strains of Pseudomonas aeruginosa.

Rationally designed cationic amphiphilic peptides for selective gene delivery to cancer cells

Gene therapy has gained increasing attention as an alternative to pharmacotherapy for treatment of various diseases. The extracellular and intracellular barriers to gene delivery necessitate the use of gene vectors which has led to the development of myriads of gene delivery systems. However, many of these gene delivery systems have pitfalls such as low biocompatibility, low loading efficiency, low transfection efficiency, lack of tissue selectivity and high production costs. Herein, we report the development of a new series of short cationic amphiphilic peptides with anticancer activity for selective delivery of small interfering RNA (siRNA) and antisense oligodeoxynucleotides (ODNs) to cancer cells. The peptides consist of alternating dyads of hydrophobic (isoleucine (I) or leucine (L)) and hydrophilic (arginine (R) or lysine (L)) amino acids. The peptides exhibited higher preference for transfection of HCT 116 colorectal cancer cells compared to human dermal fibroblasts (HDFs) and induced higher level of gene silencing in the cancer cells. The nucleic acid complexation and transfection efficiency of the peptides was a function of their secondary structure, their hydrophobicity and their C-terminal amino acid. The peptides containing L in their hydrophobic domain formed stronger complexes with siRNA and successfully delivered it to the cancer cells but were unable to release their cargo inside the cells and therefore could not induce any gene silencing. On the contrary, the peptides containing I in their hydrophobic domain were able to release their associated siRNA and induce considerable gene silencing in cancer cells. The peptides exhibited higher selectivity for colorectal cancer cells and induced less gene silencing in fibroblasts compared to the lipid-based commercial transfection reagent DharmaFECT™ 1. The results from this study can serve as a tool for rational design of new peptide-based gene vectors for high selective gene delivery to cancer cells.

Interaction of cyclotide Kalata B1 protein with model cellular membranes of varied electrostatics

A uni-molecular layer of lipids at air-water interface mimicking one of the leaflets of the cellular membrane provides a simple model to understand the interaction of any foreign molecules with the membrane. Here, the interactions of protein Kalata B1 (KB1) of cyclotide family with the phospholipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) sodium salt (DPPG), and 1,2-distearoyl-sn-glycero-3-ethylphosphocholine chloride salt (DSEPC) have been investigated. The addition of KB1 induces a change in pressure of the lipid monolayers. The characteristic time of the change in pressure is found to be dependent on the electrostatic nature of the lipid. Even though the protein is weakly surface active, it is capable of modifying the phase behavior and elastic properties of lipid monolayers with differences in their strength and nature making the layers more floppy. The KB1-lipid interaction has been quantified by calculating the excess Gibb's free energy of interaction and the 1-anilino-8-naphthalenesulfonate (ANS) binding studies. The interaction with zwitterionic DPPC and negatively charged DPPG lipids are found to be thermodynamically favorable whereas the protein shows a weaker response to positively charged DSEPC lipid. Therefore, the long ranged electrostatic is the initial driving force for the KB1 to recognize and subsequently attach to a cellular membrane. Thereafter, the hydrophobic region of the protein may penetrate into the hydrophobic core of the membrane via specific amino acid residues.

Correlation between the secondary structure and surface activity of β-sheet forming cationic amphiphilic peptides and their anticancer activity

Cancer is one of the main causes of death worldwide. The current cancer treatment strategies often lack selectivity for cancer cells resulting in dose-limiting adverse effects and reduced quality of life. Recently, anticancer peptides (ACPs) have emerged as an alternative treatment with higher selectivity, less adverse effects, and lower propensity for drug resistance. However, most of the current studies on the ACPs are focused on α-helical ACPs and there is lack of systematic studies on β-sheet forming ACPs. Herein we report the development of a new series of rationally designed short cationic amphiphilic β-sheet forming ACPs and their structure activity relationship. The peptides had the general formula (XY₁XY₂)₃, with X representing hydrophobic amino acids (isoleucine (I) or leucine (L)), Y₁ and Y₂ representing cationic amino acids (arginine (R) or lysine (K)). The cytotoxicity of the designed ACPs in HCT 116 colorectal cancer, HeLa cervical cancer and human dermal fibroblast (HDF) cells was assessed by MTT test. The physicochemical properties of the peptides were characterized by various techniques including RP-HPLC, LC-MS, and Circular Dichroism (CD) spectroscopy. The surface activity of the peptides at the air-water interface and their interaction with the lipid monolayers as models for cell membranes were studied by Langmuir trough. The peptides consisting of I with R and K had selective anticancer activity while the combination of L and R diminished the anticancer activity of the peptides but rendered them more toxic to HDFs. The anticancer activity of the peptides was directed by their surface activity (amphiphilicity) and their secondary structure in hydrophobic surfaces including cancer cell membranes. The selectivity of the peptides for cancer cells was a result of their higher penetration into cancer cell membranes compared to normal cell membranes. The peptides exerted their anticancer activity by disrupting the mitochondrial membranes and eventually apoptosis. The results presented in this study provide an insight into the structure-activity relationship of this class of ACPs which can be employed as guidance to design new ACPs with improved anticancer activity and lower toxicity against normal cells.

Rationally designed short cationic α-helical peptides with selective anticancer activity

HYPOTHESIS

Naturally derived or synthetic anticancer peptides (ACPs) have emerged as a new generation of anticancer agents with higher selectivity for cancer cells and less propensity for drug resistance. Despite the structural diversity of ACPs, α-helix is the most common secondary structure among them. Herein we report the development of a new library of short cationic amphiphilic α-helical ACPs with selective cytotoxicity against colorectal and cervical cancer.

EXPERIMENTS

The peptides had a general formula C(XXYY)₃ with C representing amino acid cysteine (providing a -SH group for molecular conjugation), X representing hydrophobic amino acids (isoleucine (I) or leucine (L)), and Y representing cationic amino acids (arginine (R) or lysine (K)). Two variants of the peptides were synthesized by adding additional Isoleucine residues to the C-terminal and replacing the N-terminal cysteine with LC-propargylglycine (LC-G) to investigate the effect of N-terminal and C-terminal variation on the anticancer activity. The structure and physicochemical properties of the peptides were determined by RP-HPLC, LC-MS and CD spectroscopy. The cytotoxicity of the peptides in different cell lines was assessed by MTT test, cell proliferation assay and mitochondrial damage assay. The mechanism of cell selectivity of the peptides was investigated by studying their interfacial behaviour at the air/water and lipid/water interface using Langmuir trough.

FINDINGS

The peptides consisting of K residues in their hydrophilic domains exhibited more selective anticancer activity whereas the peptides containing R exhibited strong toxicity in normal cells. The anticancer activity of the peptides was a function of their helical content and their hydrophobicity. Therefore, the addition of two I residues at C-terminal enhanced the anticancer activity of the peptides by increasing their hydrophobicity and their helical content. These two variants also exhibited strong anticancer activity against colorectal cancer multicellular tumour spheroids (MCTS). The higher toxicity of the peptides in cancer cells compared to normal cells was the result of higher penetration into the negatively charged cancer cell membranes, leading to higher cellular uptake, and their cytotoxic effect was mainly exerted by damaging the mitochondrial membranes leading to apoptosis. The results from this study provide a basis for rational design of new α-helical ACPs with enhanced anticancer activity and selectivity.

Measuring protein insertion areas in lipid monolayers by fluorescence correlation spectroscopy

Membrane insertion of protein domains is an important step in many membrane remodeling processes, for example, in vesicular transport. The membrane area taken up by the protein insertion influences the protein binding affinity as well as the mechanical stress induced in the membrane and thereby its curvature. To our knowledge, this is the first optical measurement of this quantity on a system in equilibrium with direct determination of the number of inserted protein and no further assumptions concerning the binding thermodynamics. Whereas macroscopic total area changes in lipid monolayers are typically measured on a Langmuir film balance, finding the number of inserted proteins without perturbing the system and quantitating any small area changes has posed a challenge. Here, we address both issues by performing two-color fluorescence correlation spectroscopy directly on the monolayer. With a fraction of the protein being fluorescently labeled, the number of inserted proteins is determined in situ without resorting to invasive techniques such as collecting the monolayer by aspiration. The second color channel is exploited to monitor a small fraction of labeled lipids to determine the total area increase. Here, we use this method to determine the insertion area per molecule of Sar1, a protein of the COPII complex, which is involved in transport vesicle formation. Sar1 has an N-terminal amphipathic helix, which is responsible for membrane binding and curvature generation. An insertion area of (3.4 ± 0.8) nm² was obtained for Sar1 in monolayers from a lipid mixture typically used in COPII reconstitution experiments, in good agreement with the expected insertion area of the Sar1 amphipathic helix. By using the two-color approach, determining insertion areas relies only on local fluorescence measurements. No macroscopic area measurements are needed, giving the method the potential to also be applied to laterally heterogeneous monolayers and bilayers.

Influence of the Headgroup on the Interaction of Poly(ethylene oxide)-Poly(propylene oxide) Block Copolymers with Lipid Bilayers

The lipid headgroup plays an important role in the association of polymers with lipid bilayer membranes. Herein, we report how a glycerol headgroup versus a choline headgroup affects the interaction of poly(ethylene oxide)-b-poly(propylene oxide) (PEO-PPO) block copolymers with lipid bilayer vesicles. Unilamellar vesicles composed of phosphatidylcholine and phosphatidylglycerol at various molar ratios were used as model membranes. The interactions between the block copolymers and lipid bilayers were quantified by pulsed-field gradient nuclear magnetic resonance (PFG-NMR) based on the distinctly different mobilities of free and bound polymers. All the investigated polymer species showed significantly higher binding with 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) sodium salt (POPG) liposomes than with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) liposomes, indicating stronger association with the glycerol headgroup compared to the choline headgroup. This effect did not become significant until the composition of mixed POPC/POPG liposomes contained more than 20 mol % POPG. A plausible explanation for the enhanced polymer binding with POPG invokes the role of hydrogen bonding between the glycerol headgroup and the ether moieties of the polymers.

Effect of Escherichia coli on phospholipid monolayers: surface tensiometry and Brewster angle microscopy measurements

The effect of Escherichia coli (E. coli) cells on two phospholipids [dipalmitoyl phosphatidylcholine (DPPC) and dimyristoyl phosphatidylcholine (DMPC)] monolayers at the surface of a 1.5 wt% NaCl salt solution has been investigated using surface tension measurement and Brewster angle microscopy. The results showed that a DPPC monolayer that has an elastic structure was changed in morphology by interaction with E. coli cells, whereas a DMPC monolayer that has an expandable structure did not change in morphology. In particular, the morphology changed significantly around the liquid-expanded (LE)-liquid-condensed (LC) phase transition point for the DPPC monolayer. It was found that the LE-LC phase transition range in a DPPC monolayer was sensitive to influence from the outside of the monolayer such as the action of E. coli cells. Such a monolayer has the potential for application as a membrane sensor for detecting a small amount of bacteria in a short time.

Quantified Membrane Permeabilization Indicates the Lipid Selectivity of Membrane-Active Antimicrobials

Most antimicrobial peptides (AMPs) and their synthetic mimics (SMAMPs) are thought to act by permeabilizing cell membranes. For antimicrobial therapy, selectivity for pathogens over mammalian cells is a key requirement. Understanding membrane selectivity is thus essential for designing AMPs and SMAMPs to complement classical antibiotics in the future. This study focuses on membrane permeabilization induced by SMAMPs and their selectivity for membranes with different lipid compositions. We measure release and fluorescence lifetime of a self-quenching dye in lipid vesicles. Apart from the dose-response, we quantify the strength of individual leakage events, and, employing cumulative kinetics, categorize permeabilization behavior. We propose that differing selectivities in a series of SMAMPs arise from a combination of the effect of the antimicrobial agent and the susceptibility of the membrane (with a given lipid composition) for certain types of leakage behavior. The unselective and hemolytic SMAMP is found to act mainly by the asymmetry stress mechanism, mediated by hydrophobic insertion of SMAMPs into lipid layers. The more selective SMAMPs induced leakage events occurring stochastically over several hours. Lipid intrinsic properties might additionally amplify the efficiency of leakage events. Leakage behavior changes with both the design of the SMAMP and the lipid composition of the membrane. Understanding how leakage behavior contributes to the selectivity and activity of antimicrobial agents will aid the design and screening of antimicrobials. An understanding of the underlying processes facilitates the comparison of membrane permeabilization across in vitro and in vivo assays.

Polarity of the ATP binding site of the Na+,K+-ATPase, gastric H+,K+-ATPase and sarcoplasmic reticulum Ca2+-ATPase

A fluorescence ratiometric method utilizing the probe eosin Y is presented for estimating the ATP binding site polarity of P-type ATPases in different conformational states. The method has been calibrated by measurements in a series of alcohols and tested using complexation of eosin Y with methyl-β-cyclodextrin. The results obtained with the Na⁺,K⁺-, H⁺,K⁺- and sarcoplasmic reticulum Ca²⁺-ATPases indicate that the ATP binding site, to which eosin is known to bind, is significantly more polar in the case of the Na⁺,K⁺- and H⁺,K⁺-ATPases compared to the Ca²⁺-ATPase. This result was found to be consistent with docking calculations of eosin with the E2 conformational state of the Na⁺,K⁺-ATPase and the Ca²⁺-ATPase. Fluorescence experiments showed that eosin binds significantly more strongly to the E1 conformation of the Na⁺,K⁺-ATPase than the E2 conformation, but in the case of the Ca²⁺-ATPase both fluorescence experiments and docking calculations showed no significant difference in binding affinity between the two conformations. This result could be due to the fact that, in contrast to the Na⁺,K⁺- and H⁺,K⁺-ATPases, the E2-E1 transition of the Ca²⁺-ATPase does not involve the movement of a lysine-rich N-terminal tail which may affect the overall enzyme conformation. Consistent with this hypothesis, the eosin affinity of the E1 conformation of the Na⁺,K⁺-ATPase was significantly reduced after N-terminal truncation. It is suggested that changes in conformational entropy of the N-terminal tail of the Na⁺, K⁺- and the H⁺,K⁺-ATPases during the E2-E1 transition could affect the thermodynamic stability of the E1 conformation and hence its ATP binding affinity.

Kinetics of interaction between antimicrobial peptide nisin and Langmuir monolayers of DPPC and DPPG molecules

We have studied the kinetics of the interaction between antimicrobial peptide nisin and Langmuir monolayers of phospholipids DPPC and DPPG at the air-water interface using the surface manometry technique. The charge on the nisin and the lipid molecules is controlled by varying the pH of the subphase, and the interactions between them are studied by measuring the surface pressure of the lipid monolayer as a function of time after injecting the nisin in the subphase. A model based on the diffusion of particles under the influence of a constant force is developed to obtain an analytical expression for surface pressure as a function of time. The expression was found to fit well with the experimental data. The average hydrodynamic radius and the translational diffusion constant of the nisin molecules are calculated from the fit parameters for the different subphase pH solutions.

Studies on the Interaction of Alyteserin 1c Peptide and Its Cationic Analogue with Model Membranes Imitating Mammalian and Bacterial Membranes

Antimicrobial peptides (AMPs) are effector molecules of the innate immune system and have been isolated from multiple organisms. Their antimicrobial properties are due to the fact that they interact mainly with the anionic membrane of the microorganisms, permeabilizing it and releasing the cytoplasmic content. Alyteserin 1c (+2), an AMP isolated from Alytes obstetricans and its more cationic and hydrophilic analogue (+5) were synthesized using the solid phase method, in order to study the interaction with model membranes by calorimetric and spectroscopic assays. Differential scanning calorimetry (DSC) showed that both peptides had a strong effect when the membrane contained phosphatidylcholine (PC) alone or was mixed with phosphatidylglycerol (PG), increasing membrane fluidization. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to study the secondary structure of the peptide. Peptide +2 exhibited a transition from β-sheet/turns to β-sheet/α-helix structures after binding with model membranes, whereas peptide +5 had a transition from aggregation/unordered to β-sheet/α-helix structures after binding with membrane-contained PC. Interestingly, the latter showed a β-sheet structure predominantly in the presence of PG lipids. Additionally, molecular dynamics (MD) results showed that the carboxy-terminal of the peptide +5 has the ability to insert into the surface of the PC/PG membranes, resulting in the increase of the membrane fluidity.

Interactions of Monovalent and Divalent Cations with Cardiolipin Monolayers

Cardiolipin is a mitochondrial phospholipid with four alkyl chains and two phosphate moieties. Tetramyristoyl cardiolipin (TMCL, (14:0)₄CL) monolayers at the air-water interface are characterized by compression isotherms, which show a liquid expanded/liquid condensed phase transition. The phase transition surface pressure π_c depends on the composition of the aqueous solution. In a calculation, this is attributed to the electrostatic double layer, which is induced by the head groups of the model membrane, and competitive ion binding. The intrinsic binding constant is large for protons ( K_H = 10 L/mol) and small for monovalent cations ( K_M (Na⁺, K⁺, Cs⁺) = 10^-3 L/mol). The different intrinsic binding constants explain the non-monotonic behavior of π_c on increasing the salt concentration: raising the monovalent salt concentration increases π_c by charging the TMCL monolayer until 0.1 mol/L, then screening effects dominate and decrease π_c by reducing the electrostatic repulsion between lipid head groups. When at fixed 0.15 mol/L NaCl concentration, the concentration of divalent cations is increased, π_c decreases. The intrinsic binding constants of divalent cations follow the sequence Sr²⁺ < Mg²⁺ < Mn²⁺ ≈ Zn²⁺ ≈ Ca²⁺ ( K_D,Ca = 1.2 L/mol). The predictive power of the calculations was tested with different solutions.

Interaction of Short Pentavalent Cationic Peptides with Negatively Charged DPPG Monolayers and Bilayers: Influence of Peptide Modifications on Binding

The binding of oligopeptides with the structure (RX)₄R and (KXX)₄K, with X being the amino acid G or A, to lipid monolayers and bilayers of dipalmitoyl-phosphatidylglycerol (DPPG) was studied and compared to the binding effects of peptides with the structure (KX)₄K. The monolayer adsorption experiments again showed the superposition of condensation effects due to charge compensation and insertion of amino acid side chains leading to expansion of the monolayer. The latter effect was enhanced when glycine was replaced by alanine. The thermotropic phase behavior of dipalmitoyl-phosphatidylglycerol (DPPG) bilayer membranes and their mixtures with short cationic model peptides was investigated by differential scanning calorimetry and infrared spectroscopy. Increasing the charge distance of the lysine residues in the series (K)₅, (KG)₄K, and (KGG)₄K results in an upshift of the main phase transition of DPPG up to 5 K, as predicted for pure electrostatic binding. All peptides exhibit only unordered structures in bulk solution as well as when bound to DPPG bilayers. (KGG)₄K additionally shows a high propensity of turn structures due to its flexibility. The exchange of glycine by alanine in (KAA)₄K leads only to a marginal increase in T_m, in contrast to the binding of (KA)₄K where the formation of intervesicular antiparallel β-sheets occurs, leading to a much more pronounced stabilization of the gel phase. This shows that the sequence and flexibility of the oligopeptides has an important influence on the formation of secondary structures bound to the bilayers. Binding of (RX)₄R peptides to DPPG bilayers has almost no influence on the lipid phase transition in bilayers. Here, condensation and insertion effects almost compensate, as the results of monolayer experiments show. This is due to the higher propensity of arginine side chains to insert into the lipid headgroup region.

The effect of pH on the lytic activity of a synthetic mastoparan-like peptide in anionic model membranes

Peptide sequences containing acidic and basic residues could potentially have their net charges modulated by bulk pH with a possible influence on their lytic activity in lipid vesicles. The present study reports on a biophysical investigation of these modulatory effects on the synthetic mastoparan-like peptide L1A (IDGLKAIWKKVADLLKNT-NH2). At pH 10.0 L1A was 6 times more efficient in lysing large anionic (1-palmitoyl-oleoyl-sn-glycero-3-phosphocholine (POPC):1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG)/(8:2)) unilamellar vesicles (LUVs) than at pH 4.0. Despite the reduction of 60% in the L1A net charge in basic pH its affinity for this vesicle was almost insensitive to pH. On the other hand, L1A insertion into monolayers was dramatically influenced by subphase condition, showing that, in the neutral and basic subphases, the peptide induced surface pressure changes that surpassed the membrane lateral pressure, being able to destabilize a bilayer structure. In addition, in the basic subphase, visualization of the compression isotherms of co-spread 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC):POPG (8:2) + 4.8 mol% L1A showed that the peptide induced significant changes in solid lipid domains, indicating its capability in perturbing lipid-packing. An insight into L1A lytic activity was also obtained in giant unilamellar vesicles (GUVs) using phase contrast microscopy. The suppression of L1A lytic activity at acidic pH is in keeping with its lower insertion capability and ability to disturb the lipid monolayer. The lytic activity observed under neutral and basic conditions showed a quick and stochastic leakage following a lag-time. The permeability and the leakage-time averaged over at least 14 single GUVs were dependent on the bulk condition. At basic pH, permeability is higher and quicker than in a neutral medium in good accordance with the lipid-packing perturbation.

Interaction of Myelin Basic Protein with Myelin-like Lipid Monolayers at Air-Water Interface

Interaction of myelin basic protein (MBP) and the cytoplasmic leaflets of the oligodendrocyte membrane is essential for the formation and compaction of the myelin sheath of the central nervous system and is altered aberrantly and implicated in the pathogenesis of neurodegenerative diseases like multiple sclerosis. To gain more detailed insights into this interaction, the adsorption of MBP to model lipid monolayers of similar composition to the myelin of the central nervous system was studied at the air-water interface with monolayer adsorption experiments. Measuring the surface pressure and the related maximum insertion pressure of MBP for different myelin-like lipid monolayers provided information about the specific role of each of the single lipids in the myelin. Depending on the ratio of negatively charged lipids to uncharged lipids and the distance between charges, the adsorption process was found to be determined by two counteracting effects: (i) protein incorporation, resulting in an increasing surface pressure and (ii) lipid condensation due to electrostatic interaction between the positively charged protein and negatively charged lipids, resulting in a decreasing surface pressure. Although electrostatic interactions led to high insertion pressures, the associated lipid condensation lowered the fluidity of the myelin-like monolayer.

The potent effect of mycolactone on lipid membranes

Mycolactone is a lipid-like endotoxin synthesized by an environmental human pathogen, Mycobacterium ulcerans, the causal agent of Buruli ulcer disease. Mycolactone has pleiotropic effects on fundamental cellular processes (cell adhesion, cell death and inflammation). Various cellular targets of mycolactone have been identified and a literature survey revealed that most of these targets are membrane receptors residing in ordered plasma membrane nanodomains, within which their functionalities can be modulated. We investigated the capacity of mycolactone to interact with membranes, to evaluate its effects on membrane lipid organization following its diffusion across the cell membrane. We used Langmuir monolayers as a cell membrane model. Experiments were carried out with a lipid composition chosen to be as similar as possible to that of the plasma membrane. Mycolactone, which has surfactant properties, with an apparent saturation concentration of 1 μM, interacted with the membrane at very low concentrations (60 nM). The interaction of mycolactone with the membrane was mediated by the presence of cholesterol and, like detergents, mycolactone reshaped the membrane. In its monomeric form, this toxin modifies lipid segregation in the monolayer, strongly affecting the formation of ordered microdomains. These findings suggest that mycolactone disturbs lipid organization in the biological membranes it crosses, with potential effects on cell functions and signaling pathways. Microdomain remodeling may therefore underlie molecular events, accounting for the ability of mycolactone to attack multiple targets and providing new insight into a single unifying mechanism underlying the pleiotropic effects of this molecule. This membrane remodeling may act in synergy with the other known effects of mycolactone on its intracellular targets, potentiating these effects.

Cospreading of Anionic Phospholipids with Peptides of the Structure (KX)4K at the Air-Water Interface: Influence of Lipid Headgroup Structure and Hydrophobicity of the Peptide on Monolayer Behavior

Mixtures of anionic phospholipids (PG, PA, PS, and CL) with cationic peptides were cospread from a common organic solvent at the air-water interface. The compression of the mixed film was combined with epifluorescence microscopy or infrared reflection adsorption spectroscopy (IRRAS) to gain information on the interactions of the peptide with the different lipids. To evaluate the influence of the amino acid X of peptides with the sequence (KX)₄K on the binding, 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) was mixed with different peptides with increasing hydrophobicity of the uncharged amino acid X. The monolayer isotherms of DPPG/(KX)₄K mixtures show an increased area for the lift-off due to incorporation of the peptide into the liquid-expanded (LE) state of the lipid. The surface pressure for the transition from LE to the liquid-condensed (LC) state is slightly increased for peptides with amino acids X with moderate hydrophobicity. For the most hydrophobic peptide (KL)₄K two plateaus are seen at a charge ratio PG to K of 5:1, and a strongly increased transition pressure is observed for a charge ratio of 1:1. Epifluorescence microscopy images and infrared spectroscopy show that the lower plateau corresponds to the LE-LC phase transition of the lipid. The upper plateau is connected with a squeeze-out of the peptide into the subphase. To test the influence of the lipid headgroup structure on peptide binding (KL)₄K was cospread with different anionic phospholipids. The shift of the isotherm to larger areas for lift-off and to higher surface pressure for the LE-LC phase transition was observed for all tested anionic lipids. Epifluorescence microscopy reveals the formation of LC domains with extended filaments indicating a decrease in line tension due to accumulation of the peptides at the LC-domain boundaries. This effect depends on the size of the headgroup of the anionic phospholipid.

Lipid-packing perturbation of model membranes by pH-responsive antimicrobial peptides

The indiscriminate use of conventional antibiotics is leading to an increase in the number of resistant bacterial strains, motivating the search for new compounds to overcome this challenging problem. Antimicrobial peptides, acting only in the lipid phase of membranes without requiring specific membrane receptors as do conventional antibiotics, have shown great potential as possible substituents of these drugs. These peptides are in general rich in basic and hydrophobic residues forming an amphipathic structure when in contact with membranes. The outer leaflet of the prokaryotic cell membrane is rich in anionic lipids, while the surface of the eukaryotic cell is zwitterionic. Due to their positive net charge, many of these peptides are selective to the prokaryotic membrane. Notwithstanding this preference for anionic membranes, some of them can also act on neutral ones, hampering their therapeutic use. In addition to the electrostatic interaction driving peptide adsorption by the membrane, the ability of the peptide to perturb lipid packing is of paramount importance in their capacity to induce cell lysis, which is strongly dependent on electrostatic and hydrophobic interactions. In the present research, we revised the adsorption of antimicrobial peptides by model membranes as well as the perturbation that they induce in lipid packing. In particular, we focused on some peptides that have simultaneously acidic and basic residues. The net charges of these peptides are modulated by pH changes and the lipid composition of model membranes. We discuss the experimental approaches used to explore these aspects of lipid membranes using lipid vesicles and lipid monolayer as model membranes.

Differential Interaction of Synthetic Glycolipids with Biomimetic Plasma Membrane Lipids Correlates with the Plant Biological Response

Natural and synthetic amphiphilic molecules including lipopeptides, lipopolysaccharides, and glycolipids are able to induce defense mechanisms in plants. In the present work, the perception of two synthetic C14 rhamnolipids, namely, Alk-RL and Ac-RL, differing only at the level of the lipid tail terminal group have been investigated using biological and biophysical approaches. We showed that Alk-RL induces a stronger early signaling response in tobacco cell suspensions than does Ac-RL. The interactions of both synthetic RLs with simplified biomimetic membranes were further analyzed using experimental and in silico approaches. Our results indicate that the interactions of Alk-RL and Ac-RL with lipids were different in terms of insertion and molecular responses and were dependent on the lipid composition of model membranes. A more favorable insertion of Alk-RL than Ac-RL into lipid membranes is observed. Alk-RL forms more stable molecular assemblies than Ac-RL with phospholipids and sterols. At the molecular level, the presence of sterols tends to increase the RLs' interaction with lipid bilayers, with a fluidizing effect on the alkyl chains. Taken together, our findings suggest that the perception of these synthetic RLs at the membrane level could be related to a lipid-driven process depending on the organization of the membrane and the orientation of the RLs within the membrane and is correlated with the induction of early signaling responses in tobacco cells.

Electrostatic Stabilization Plays a Central Role in Autoinhibitory Regulation of the Na+,K+-ATPase

The Na⁺,K⁺-ATPase is present in the plasma membrane of all animal cells. It plays a crucial role in maintaining the Na⁺ and K⁺ electrochemical potential gradients across the membrane, which are essential in numerous physiological processes, e.g., nerve, muscle, and kidney function. Its cellular activity must, therefore, be under tight metabolic control. Consideration of eosin fluorescence and stopped-flow kinetic data indicates that the enzyme's E2 conformation is stabilized by electrostatic interactions, most likely between the N-terminus of the protein's catalytic α-subunit and the adjacent membrane. The electrostatic interactions can be screened by increasing ionic strength, leading to a more evenly balanced equilibrium between the E1 and E2 conformations. This represents an ideal situation for effective regulation of the Na⁺,K⁺-ATPase's enzymatic activity, because protein modifications, which perturb this equilibrium in either direction, can then easily lead to activation or inhibition. The effect of ionic strength on the E1:E2 distribution and the enzyme's kinetics can be mathematically described by the Gouy-Chapman theory of the electrical double layer. Weakening of the electrostatic interactions and a shift toward E1 causes a significant increase in the rate of phosphorylation of the enzyme by ATP. Electrostatic stabilization of the Na⁺,K⁺-ATPase's E2 conformation, thus, could play an important role in regulating the enzyme's physiological catalytic turnover.