Spontaneous Unzipping of Xylonucleic Acid Assisted by a Single-Walled Carbon Nanotube: A Computational Study

Maturation of siRNA by strand separation: Steered molecular dynamics study

RNA interference, particularly siRNA induced gene silencing is becoming an important avenue of modern therapeutics. The siRNA is delivered to the cells as short double helical RNA which becomes single stranded for forming the RISC complex. Significant experimental evidence is available for most of the steps except the process of the separation of the two strands. We have attempted to understand the pathway for double stranded siRNA (dsRNA) to single stranded (ssRNA) molecules using steered molecular dynamics simulations. As the process is completely unexplored we have applied force from all possible directions restraining all possible residues to convert dsRNA to ssRNA. We found pulling one strand along the helical axis direction restraining the far end of the other strand demands excessive force for ssRNA formation. Pulling a central residue of one strand, in a direction perpendicular to the helix axis, while keeping the base paired residue fixed requires intermediate force for strand separation. Moreover, we found that in this process the force requirement is quite high for the first bubble formation (nucleation energy) and the bubble propagation energies are quite small. We believe the success rate of the design of siRNA sequences for gene silencing may increase if this mechanistic knowledge is utilized for such a design process.Communicated by Ramaswamy H. Sarma.

Adsorption Properties and Quantum Molecular Descriptors of the Anti-cancer Drug Cytophosphane on the Armchair Single-Walled Carbon Nanotubes: A DFT Study

Abstract:

In the current work, the adsorption of cytophosphane (cytophosphane is a chemotherapeutic drug and is used to treat several specific autoimmune diseases and malignant processes) on the (5,5) SWCNT was studied using density functional theory (DFT) calculations in terms of geometry, energy gap, charge transfer, molecular electrostatic potential surface, and density of state analysis. The behavior of the binding properties and the electronic structures revealed that the cytophosphane molecule could be adsorbed on the SWCNT by the adsorption energy of approximately -100.3 kcal mol-1. Also, it was found that the electronic properties of the SWCNT are very sensitive to the presence of cytophosphane molecules so that the energy gap of the nanotube is changed about 61% after the adsorption process. Based on calculated results, the SWCNT is expected to be suitable as a drug carrier for the delivery of cytophosphane drug.

Interaction of double-stranded polynucleotide poly(A:U) with graphene/graphene oxide

Hybrids formed by DNA/RNA and graphene family nanomaterials are considered as potentially useful multifunctional agents in biosensing and nanomedicine. In this work, we study the noncovalent interaction between double-stranded (ds) RNA, polyadenylic:polyuridylic acids (poly(A:U)) and graphene oxide/graphene (GO/Gr) using UV absorption spectroscopy and molecular dynamics (MD) simulations. RNA melting showed that relatively long ds-RNA is adsorbed onto GO (at an ionic strength of [Formula: see text]) at that a large fraction of RNA maintains the duplex structure. It was revealed that this fraction decreases over long time (during a few days), indicating a slow adsorption process of the long polymer. MD simulations showed that the adsorption of duplex (rA)[Formula: see text]: (rU)[Formula: see text] or (rA)[Formula: see text]: (rU)[Formula: see text] on graphene starts with the interaction between [Formula: see text]-systems of graphene and base pairs located at a duplex tail. In contrast to relatively long duplex (rA)[Formula: see text]: (rU)[Formula: see text] which keeps parallel arrangement along the graphene surface, the shorter one ((rA)[Formula: see text]: (rU)[Formula: see text]) always adopts a perpendicular orientation relative to graphene even in case of the initial parallel orientation. It was found out that (rA)[Formula: see text]: (rU)[Formula: see text] forms the stable hybrid with graphene keeping essential fraction of the duplex, while (rA)[Formula: see text]: (rU)[Formula: see text] demonstrates the duplex unzipping into two single strands with time. The interaction energies between adenine/uracil stacked with graphene as well between nucleotides in water environment were determined.

A molecular device: A DNA molecular lock driven by the nicking enzymes

As people are placing more and more importance on information security, how to realize the protection of information has become a hotspot of current research. As a security device, DNA molecular locks have great potential to realize information protection at the molecular level. However, building a highly secure molecular lock is still a serious challenge. Therefore, taking advantage of the DNA strand displacement and enzyme control technology, we constructed a molecular lock with a self-destructive mechanism. This molecular lock is mainly composed of logic circuits and takes nicking enzymes as inputs. To build this molecular lock, we first constructed a series of cascade circuits, including a YES–YES cascade circuit and a YES–AND cascade circuit. Then, an Inhibit logic gate was constructed to explore the inhibitory properties between different combinations of two nicking enzymes. Finally, using the characteristics of mutual inhibition between several enzymes, a DNA molecular lock driven by three nicking enzymes was constructed. In this molecular device, only the correct sequence of nicking enzymes can be input to ensure the normal operation of the molecular lock. Once the wrong password is entered, the device will be destroyed and cannot be recovered, which effectively prevents intruders from cracking the lock through exhaustive methods. The molecular lock has the function of simulating an electronic keyboard, which can realize the protection of information at the molecular level, and provides a new implementation method for building more advanced and complex molecular devices.

Energy Landscapes of Deoxyxylo- and Xylo-Nucleic Acid Octamers

Artificial analogues of the natural nucleic acids have attracted interest as a diverse class of information storage molecules capable of self-replication. In this study, we use the computational potential energy landscape framework to investigate the structural and dynamical properties of xylo- and deoxyxylo-nucleic acids (XyNA and dXyNA), which are derived from their respective RNA and DNA analogues by inversion of a single chiral center in the sugar moiety of the nucleotides. For an octameric XyNA sequence and the analogue dXyNA, we observe facile conformational transitions between a left-handed helix, which is the free energy global minimum, and a ladder-type structure with approximately zero helicity. The competing ensembles are better separated in the dXyNA, making it a more suitable candidate for a molecular switch, whereas the XyNA exhibits additional flexibility. Both energy landscapes exhibit greater frustration than we observe in RNA or DNA, in agreement with the higher degree of optimization expected from the principle of minimal frustration in evolved biomolecules.

Non-covalent Methods of Engineering Optical Sensors Based on Single-Walled Carbon Nanotubes

Optical sensors based on single-walled carbon nanotubes (SWCNTs) demonstrate tradeoffs that limit their use in in vivo and in vitro environments. Sensor characteristics are primarily governed by the non-covalent wrapping used to suspend the hydrophobic SWCNTs in aqueous solutions, and we herein review the advantages and disadvantages of several of these different wrappings. Sensors based on surfactant wrappings can show enhanced quantum efficiency, high stability, scalability, and diminished selectivity. Conversely, sensors based on synthetic and bio-polymer wrappings tend to show lower quantum efficiency, stability, and scalability, while demonstrating improved selectivity. Major efforts have focused on optimizing sensors based on DNA wrappings, which have intermediate properties that can be improved through synthetic modifications. Although SWCNT sensors have, to date, been mainly engineered using empirical approaches, herein we highlight alternative techniques based on iterative screening that offer a more guided approach to tuning sensor properties. These more rational techniques can yield new combinations that incorporate the advantages of the diverse nanotube wrappings available to create high performance optical sensors.

Probing the role of dispersion energy on structural transformation of double-stranded xylo- and ribo-nucleic acids

The structural transformation of double-stranded octameric xyloNA and RNA were probed by modulating the dispersion energy. For the RNA, the increase and the decrease in dispersion energy lead to over-winding and unwinding of the helix. These structural transformations resemble the features observed due to the action of the topoisomerases and helicases enzymes, respectively. On the other hand, an increase in the dispersion energy has minimal effect on the structural transformation of double-strand xyloNA, whilst a decrease in the dispersion energy results in a structural transformation which happens due to the action of the helicases. The unresponsive behaviour of xyloNA to an increase in the dispersion energy is attributed to the presence of an Lpπ interaction between the oxygen atom of the xylose sugar and the adjacent nucleobase.

Restriction Enzyme Analysis of Double-Stranded DNA on Pristine Single-Walled Carbon Nanotubes

Nanoprobes such as single-walled carbon nanotubes (SWCNTs) are capable of label-free detection that benefits from intrinsic and photostable near-infrared fluorescence. Despite the growing number of SWCNT-based applications, uncertainty surrounding the nature of double-stranded DNA (dsDNA) immobilization on pristine SWCNTs has limited their use as optical sensors for probing DNA-protein interactions. To address this limitation, we study enzyme activity on unmodified dsDNA strands immobilized on pristine SWCNTs. Restriction enzyme activity on various dsDNA sequences was used to verify the retention of the dsDNA's native conformation on the nanotube surface and to quantitatively compare the degree of dsDNA accessibility. We report a 2.8-fold enhancement in initial enzyme activity in the presence of surfactants. Förster resonance electron transfer (FRET) analysis attributes this enhancement to increased dsDNA displacement from the SWCNT surface. Furthermore, the accessibility of native dsDNA was found to vary with DNA configuration and the spacing between the restriction site and the nanotube surface, with a minimum spacing of four base pairs (bp) from the anchoring site needed to preserve enzyme activity. Molecular dynamics (MD) simulations verify that the anchored dsDNA remains within the vicinity of the SWCNT, revealing an unprecedented bimodal displacement of the bp nearest to SWCNT surface. Together, these findings illustrate the successful immobilization of native dsDNA on pristine SWCNTs, offering a new near-infrared platform for exploring vital DNA processes.

Molecular dynamics simulation of the folding of single alkane chains with different lengths on single-walled carbon nanotubes and graphene

Chain folding is an important step during polymer crystallization. In order to study the effects of the surface on chain folding, molecular dynamics simulations of the folding of different alkane chains on three kinds of single-walled carbon nanotubes (SWCNTs) and graphene were performed. The folding behaviors of the single alkane chains on these surfaces were found to be different from their folding behaviors in vacuum. The end-to-end distances of the chains were calculated to explore the chain folding. An increasing tendency to fold into two or more stems with increasing alkane chain length was observed. This result indicates that the occurrence and the stability of chain folding are related to the surface curvature, the diameter of the SWCNT, and surface texture. In addition, the angle between the direction of the alkane chain segment and the direction of the surface texture was measured on different surfaces.