Micelle Formation in Aqueous Solutions of Room Temperature Ionic Liquids: A Molecular Dynamics Study

Dissolution and regeneration of starch in hydroxyl-functionalized ionic liquid aqueous solution

There have been continuous quests for suitable solvents for starch, given the importance of effective starch dissolution in its modification and subsequent materials production. In light of this, the potential of hydroxyl-functionalized ionic liquid (IL) as a promising solvent for starch was investigated. Within this study, a hydroxyl-functionalized IL 1-(2,3-dihydroxypropyl)-3-methylimidazole chloride ([Dhpmim][Cl]) was synthesized, and the dissolution of starch in this IL and its aqueous solutions was examined. Starch (5.35 wt%) was completely dissolved in [Dhpmim][Cl] within 2 h at 100 °C. The solubility of starch in [Dhpmim][Cl]-water mixtures initially increased and then decreased with rising water content. The optimal ratio was found to be 1:9 (wt/wt) water:[Dhpmim][Cl], achieving the highest solubility at 9.28 wt%. Density functional theory (DFT) simulations elucidated the possible interactions between starch and solvents. After dissolution and regeneration in the 1:9 water:[Dhpmim][Cl] mixture, starch showed no discernible change in the molecular structure, with no derivatization reaction observed. Regenerated starch exhibited a transformation in crystalline structure from A-type to V-type, and its relative crystallinity (12.4 %) was lower than that of native starch (25.2 %), resulting in decreased thermal stability. This study suggests that the hydroxyl-functionalized IL, [Dhpmim][Cl], and its aqueous solutions serve as effective solvents for starch dissolution.

Exploring the Depth-Dependent Microviscosity inside a Micelle Using Butterfly-Motion-Based Fluorescent Probes

The viscosity distribution of micellar interiors from the very center to the outer surface is dramatically varied, which has been distinguished in theoretical models, yet it remains highly challenging to quantify this issue experimentally. Herein, a series of fluorophore-substituted surfactants DPAC-Fn (n = 3, 5, 7, 9, 11, 13, and 15) are developed by functionalizing the different alkyl-trimethylammonium bromides with the butterfly motion-based viscosity sensor, N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC). The immersion depth of DPAC units of DPAC-Fn in cetrimonium bromide (C16TAB) micelles depends on the alkyl chain lengths n. From deep (n = 15) to shallow (n = 3), DPAC-Fn in C16TAB micelles exhibits efficient viscosity-sensitive dynamic multicolor emissions. With external standards for quantification, the viscosity distribution inside a C16TAB micelle with the size of ∼4 nm is changed seriously from high viscosity (∼190 Pa s) in the core center to low viscosity (∼1 Pa s) near the outer surface. This work provides a tailored approach for powerful micelle tools to explore the depth-dependent microviscosity of micellar interiors.

Grafting and Solubilization of Redox-Active Organic Materials for Aqueous Redox Flow Batteries

This study concerns the development of sustainable design strategies of aqueous electrolytes for redox flow batteries using redox-active organic materials. A green spontaneous grafting reaction occurs between a redox-active organic radical and an electrochemically activated structural modifier at room temperature through a simple mixing step. Then, a physical mixing method is used to formulate a structured aqueous electrolyte and enables aqueous solubilization of the organic solute from below 0.5 to 1.5 m beyond the conventional dissolution limit. The as-obtained concentrated mixture can be readily used as catholyte for a redox flow battery. A record high discharge cell voltage (1.6 V onset output voltage) in aqueous non-hybrid flow cell is attained by using the studied electrolytes.

Ionic liquid-assisted synthesis of mesoporous polymers and carbon materials: the self-assembly mechanism

Soft-templating synthesis has been widely employed to fabricate ordered mesoporous polymer and carbon materials with effectively tuneable pore sizes. However, the commonly used templating agents, block copolymers, are normally decomposed during the process, thus are barely recyclable; this increases the costs and hampers the scale-up feasibility. Therefore, it becomes imperative to seek promising alternatives; amphiphilic ionic liquids (ILs) are excellent candidates due to their good recyclability. This study explored the templating behaviour of IL templates for preparing mesoporous polymers and carbons. In details, the self-assembly of ternary systems (comprising of IL templates, precursors and solvent) were investigated by a combination of coarse-grained molecular dynamics (CGMD) simulations, density function theory (DFT) calculations and experimental techniques. The results indicate that the morphologies of IL templates are tuneable not only by the adjustment of water content in the mixture but also by the selection of suitable precursors. Material precursors containing increasing numbers of hydroxyl moieties also induce various precursor-template spatial correlations, resulting in different topological structures of nanomaterials. This work presents a fundamental investigation into the mechanisms of templating synthesis with amphiphilic ILs as recyclable templates and gives insight into the effective design of coveted carbon nanomaterials for targeted applications.

Use of Ionic Liquids in Protein and DNA Chemistry

Ionic liquids (ILs) have been receiving much attention as solvents in various areas of biochemistry because of their various beneficial properties over the volatile solvents and ILs availability in myriad variants (perhaps as many as 108) owing to the possibility of paring one cation with several anions and vice-versa as well as formulations as zwitterions. Their potential as solvents lies in their tendency to offer both directional and non-directional forces toward a solute molecule. Because of these forces, ionic liquids easily undergo intermolecular interactions with a range of polar/non-polar solutes, including biomolecules such as proteins and DNA. The interaction of genomic species in aqueous/non-aqueous states assists in unraveling their structure and functioning, which have implications in various biomedical applications. The charge density of ionic liquids renders them hydrophilic and hydrophobic, which retain intact over long-range of temperatures. Their ability in stabilizing or destabilizing the 3D-structure of a protein or the double-helical structure of DNA has been assessed superior to the water and volatile organic solvents. The aptitude of an ion in influencing the structure and stability of a native protein depends on their ranking in the Hofmeister series. However, at several instances, a reverse Hofmeister ordering of ions and specific ion-solute interaction has been observed. The capability of an ionic liquid in terms of the tendency to promote the coiling/uncoiling of DNA structure is noted to rely on the basicity, electrostatic interaction, and hydrophobicity of the ionic liquid in question. Any change in the DNA's double-helical structure reflects a change in its melting temperature (T m), compared to a standard buffer solution. These changes in DNA structure have implications in biosensor design and targeted drug-delivery in biomedical applications. In the current review, we have attempted to highlight various aspects of ionic liquids that influence the structure and properties of proteins and DNA. In short, the review will address the issues related to the origin and strength of intermolecular interactions, the effect of structural components, their nature, and the influence of temperature, pH, and additives on them.

The effect of anion on aggregation of amino acid ionic liquid: Atomistic simulation

Aggregation behavior of dodecyl betaine chloride [DB][Cl], as an amino acid ionic liquid, and dodecyl betaine N-acetyl glycinate [DB][AG], as a bio ionic liquid, in aqueous media was studied through molecular dynamics simulation. The aggregating was investigated by radial distribution function, coordination numbers, and hydrogen bond numbers. The results demonstrated the hydrogen bond between [DB]⁺ and [AG]^- that leads to aggregation. The number of hydrogen bonds of [DB][AG] is greater than [DB][Cl] and causes a decrease in the gradient of the mean square displacement, thereby the diffusion coefficient of cation, anion, and water in [DB][AG]. The results point to a stable aggregation of [DB][AG] which is in agreement with the results of root mean square deviations. The aggregation number for [DB][AG] is 50 and 44 for [DB][Cl]. Computing the radius of gyration and geometrical radius shows that the aggregation size is 23.0 Å and 26.4 Å for [DB][AG] and [DB][Cl], respectively. It was also observed that the shape of the aggregates is quasi-spherical that points to a sub-diffusive regime.

Molecular Dynamics Insights into the Nanoscale Structural Organization and Local Interaction of Aqueous Solutions of Ionic Liquid 1-Butyl-3-methylimidazolium Nitrate

Considering the growing number of applications of the aqueous ionic liquids (ILs), atomistic molecular dynamics (MD) simulations were used to probe the effect of water molar fraction, x_w, ranging from 0.00 to 0.90, on the nanoscale local structure of 1-butyl-3-methylimidazolium nitrate, [bmim][NO₃], IL. The results prove that, with water addition, the cation-anion, cation-cation, and anion-anion structural correlations are weakened, while strong anion-water and unconventional cation-water hydrogen bonds are formed in the solutions. Water molecules were detected as bridges between nitrate anions, and the water cluster size distribution at different x_w's was investigated. Simulation shows a similar pattern of probability densities for water and anion around the acidic hydrogen atoms of the reference cation ring, while both species move away from the cation butyl chain. Increasing the water concentration to x_w = 0.90 causes decreasing of the local arrangement of the nearest-neighboring cations, because of the weakening of cation-cation π-π stacking. In addition, this dilution reduces the probability of the in-plane cation-anion conformation, disrupts both the polar ionic network and nonpolar domains, and diminishes the nanoaggregation of the cation butyl chains compared to those of the neat IL. These results can rationalize the origins of the fluidity enhancements and transport property trends upon adding water to the imidazolium-based ILs. The current study proposes a deep atomistic-level insight into the complex coupling between water concentration, microscopic structure, and local interactions of aqueous imidazolium-based ILs with hydrophilic anions.

Comparing ion transport in ionic liquids and polymerized ionic liquids

Polymerized ionic liquids (polyILs) combine the unique properties of ionic liquids (ILs) with macromolecular polymers. But anion diffusivities in polyILs can be three orders of magnitude lower than that in ILs. Endeavors to improve ion transport in polyILs urgently need in-depth insights of ion transport in polyILs. As such in the work we compared ion transport in poly (1-butyl-3-vinylimidazolium-tetrafluoroborate) (poly ([BVIM]-[BF4])) polyIL and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]-[BF4]) IL. The diffusivities of ions in the polyIL and IL were measured and computed. According to the results of the molecular dynamics simulations performed, in the IL the coupling motion between an anion and the ions around determines the ion diffusivities, and the ion association lifetime gives the time scale of ion transport. But in the polyIL, the hopping of an anion among cages composed of cationic branch chains determines the diffusivity, and the associated anion transport time scale is the trap time, which is the time when an anion is caught inside a cage, not the ion association lifetime, as Mogurampelly et al. regarded. The calculation results of average displacements (ADs) of the polyIL chains show that, besides free volume fraction, average amplitudes of the oscillation of chains and chain translation speed lead to various diffusivities at various temperatures.

The wetting behavior of aqueous imidazolium based ionic liquids: a molecular dynamics study

Aqueous ionic liquids are of particular interest due to their tunability of physical and chemical properties and a deeper understanding of their structure-property relationship is desired. Molecular dynamics (MD) simulations were conducted to study the wetting behavior of aqueous imidazolium-based ionic liquids (ILs), consisting of a 1-ethyl-3-methylimidazolium [EMIM]+ cation and either a hydrophilic boron tetrafluoride [BF4]- or a hydrophobic bis(trifluoromethylsulfonyl)imide [NTF2]- anion mixed in water. To understand the effect of anion and concentration of ILs at the graphite solid-liquid interface, wettability studies were performed with IL concentrations from 0-50 wt%. The contact angle of aqueous IL droplets decreases with increasing IL concentration. Droplet characteristics near the surface were investigated by profiling the density perpendicular (z-direction) and horizontal (r-direction) to the graphite sheet; this was further quantified by an orientation order parameter. Due to the preferred adsorption of ILs, water depletes near the surface as IL concentration increases. The hydrophobic [NTF2]- anion forces the IL toward the interface from the bulk, whereas the hydrophilic [BF4]- anion causes the IL to remain in the bulk of the droplet. Differences in water-anion hydrogen bonding, the nature of the anions, and their interfacial tensions are crucial factors in the wetting behavior of aqueous ionic liquids.

Insight into the formation and permeability of ionic liquid unilamellar vesicles by molecular dynamics simulation

Unilamellar vesicles in solution could open up new horizons for reaction and material delivery, but the formation mechanism especially for the permeability of the small molecule through the vesicle membrane is still unknown. In this study, the formation and permeability of the unilamellar vesicles formed by the ionic liquid 1-dodecyl-3-methylimidazolium salicylate ([C12mim][Sal]) have been investigated by molecular dynamics simulation. Starting from a random distribution of ionic liquids, the entire process of vesicle formation could be observed on a nanosecond time scale, during which planar and cup-like structures are formed at the intermediate stage. Energy analysis reveals that the electrostatic interactions between cations and anions play a dominant role in forming and stabilizing the vesicle. Radial density distribution functions indicate that the final stable vesicle is a spherical bilayer structure. Besides, it was found that the structure of vesicles is maintained with the increase of temperature, while the water molecules in the vesicles could be completely exchanged quickly. These results suggest that vesicles may be beneficial for the enrichment or release of molecules.

Translational Diffusion in a Set of Imidazolium-Based Ionic Liquids [bmim]+A- and Their Mixtures with Water

As the development of the work (J. Phys. Chem. B 2019, 123 (10), 2362-2372), we have investigated the translational mobility in the same set of dried imidazolium-based ionic liquids (ILs) [bmim]A (A = BF₄^-, NO₃^-, TfO^-, I^-, Br^-, and Cl^-) in a wide temperature range using the NMR technique. It is shown that for the [bmim]⁺ cation, the temperature dependencies of product Dη do not follow the Stokes-Einstein relation for most systems studied, that is, the so-called "diffusion-viscosity decoupling" was realized. The correlation between local and translational mobility in pure IL of the [bmim][A] type was investigated using the data on NMR relaxation rates and diffusion coefficients. The most recent hypothesis of "water pockets" in mixtures of IL with water is critically discussed. Considering the totality of data in the literature and obtained here, we propose a specific model of the microstructure which may be applied up to water concentrations of 80-90 mol % (the structure of water-rich solutions is out of our current consideration). To confirm the model, molecular dynamics simulations of "IL-water" mixtures were also carried out.

Role of Ionic Liquid [EMIM]+[SCN]- in the Adsorption and Diffusion of Gases in Metal-Organic Frameworks

We study the adsorption performance of metal-organic frameworks (MOFs) impregnated of ionic liquids (ILs). To this aim we calculated adsorption and diffusion of light gases (CO₂, CH₄, N₂) and their mixtures in hybrid composites using molecular simulations. The hybrid composites consist of 1-ethyl-3-methylimidazolium thiocyanate impregnated in IRMOF-1, HMOF-1, MIL-47, and MOF-1. We found that the increase of the amount of IL enhances the adsorption selectivity in favor of carbon dioxide for the mixtures CO₂/CH₄ and CO₂/N₂ and in favor of methane in the mixture CH₄/N₂. We also provide detailed analysis of the microscopic organization of ILs and adsorbates via radial distribution functions and average occupation profiles and study the impact of the ILs in the diffusion of the adsorbates inside the pores of the MOFs. Based on our findings, we discuss the advantages of using IL/MOF composites for gas adsorption to increase the adsorption of gases and to control the pore sizes of the structures to foster selective adsorption.

Electrolytes, SEI Formation, and Binders: A Review of Nonelectrode Factors for Sodium-Ion Battery Anodes

Through intense effort in recent years, knowledge of Na-ion batteries has been advanced significantly, pertaining to electrodes. Often, such progress has been accompanied by using a convenient choice of electrolyte or binder. Nevertheless, it has been witnessed that "external" factors to electrodes, such as electrolytes, solid electrolyte interphase, and binders, affect the functions of electrodes profoundly. And generally, certain types of electrodes favor some electrolytes or binders. With a rapidly increasing number of publications in the area, trends in terms of electrolytes and binders are possibly exploitable. Unfortunately, the field has yet to see a review article that devotes itself to these nonelectrode aspects of Na-ion batteries. Here, the gap is filled by conducting a comprehensive review of these nonelectrode external factors, especially by looking into their correlation with electrochemical properties, such as cycle life, and first cycle coulombic efficiency. Not only are the representative reports reviewed, but also quantitative analyses on the database that are constructed are provided. With such analyses, some new data-driven perspectives are postulated, which are of great value to the community.

Effect of water and ionic liquids on biomolecules

The remarkable progress in the field of ionic liquids (ILs) in the last two decades has involved investigations on different aspects of ILs in various conditions. The nontoxic and biocompatible nature of ILs makes them a suitable substance for the storage and application of biomolecules. In this regard, the aqueous IL solutions have attracted a large number of studies to comprehend the role of water in modulating various properties of biomolecules. Here, we review some of the recent studies on aqueous ILs that concern the role of water in altering the behavior of ILs in general and in case of biomolecules solvated in ILs. The different structural and dynamic effects caused by water have been highlighted. We discuss the different modes of IL interaction that are responsible for stabilization and destabilization of proteins and enzymes followed by examples of water effect on this. The role of water in the case of nucleic acid storage in ILs, an area which has mostly been underrated, also has been emphasized. Our discussions highlight the fact that the effects of water on IL behavior are not general and are highly dependent on the nature of the IL under consideration. Overall, we aim to draw attention to the significance of water dynamics in the aqueous IL solutions, a better understanding of which can help in developing superior storage materials for application purposes.

Luminescent micellar nano-interfaces of surface active ionic liquid for the selective recognition of ADP in aqueous medium

Selective recognition of ADP by the micellar nano-interfaces of SAIL is observed whereas monomers/bilayers are not sensitive towards ADP.