Impact of Hydrogen Bonding on the Dynamics and Structure of Protic Ionic Liquid/Water Binary Mixtures

Classical Molecular Dynamics Simulation of Glyonic Liquids: Structural Insights and Relation to Conductive Properties

Rhamnolipids are biosurfactants that have obtained wide industrial and environmental interests with their biodegradability and great surface activity. Besides their important roles as surfactants, they are found to function as a new type of glycolipid-based protic ionic liquids (ILs)─glyonic liquids (GLs). GLs are reported to have impressive physicochemical properties, especially superionic conductivity, and it was reported in experiments that specific ion selections and the fraction of water content have a strong effect on the conductivity. Also, the shape of the conductivity curve as a function of water fraction in GLs is interesting with a sharp increase first and a long plateau. We related the conductivities to the three-dimensional (3D) networks composed of -OH inside the GLs utilizing classical molecular dynamics (MD) simulations. The amount and size of these networks vary with both ion species and water fractions. Before reaching the first hydration layer, the -OH networks with higher projection/box length ratios indicate better conductivity; after reaching the first hydration layer and forming continuous structures, the conductivity retains with more water molecules participating in the continuous networks. Therefore, networks are found to be a qualitative predictor of actual conductivity. This is explained by the analysis of the atomic structures, including radial distribution function, fraction free volume, anion conformations, and hydrogen bond occupancies, of GLs and their water mixtures under different chemical conditions.

Hydrogen Bonding and Infrared Spectra of Ethyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide/Water Mixtures: A View from Molecular Dynamics Simulations

Simulations of ab initio molecular dynamics have been performed for mixtures of ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIM-TFSI) ionic liquid and water. Statistics of donors and acceptors of hydrogen bonds has revealed that with increasing water content, hydrogen bonds between EMIM cations and TFSI anions are replaced by bonds to water molecules. In the mixture of liquids, the total number of bonds (from EMIM cations or water molecules) formed by TFSI acceptors increases. IR spectra obtained from ab initio molecular dynamics trajectories are in good agreement with literature data for ionic liquid/water systems. Analysis of oscillations of individual C-H and O-H bonds has shown correlations between vibrational frequencies and hydrogen bonds formed by an EMIM cation or water molecule and has indicated that the changes in the IR spectrum result from the decreased number of water-water hydrogen bonds in the mixture. The tests of DFTB methodology with tailored parameterizations have yielded reasonably good description of the IR spectrum of bulk water, whereas available parameterizations have failed in satisfactory reproduction of the IR spectrum of EMIM-TFSI/water mixtures in the region above 3000 cm^-1.

Molecular insights into the electrowetting behavior of aqueous ionic liquids

Molecular dynamics (MD) simulations were applied to investigate the wettability of aqueous hydrophilic and hydrophobic imidazolium-based ionic liquid (IL) nano-droplets on a graphite surface under a perpendicular electric field. Imminent transformation in the droplet configuration was observed at E = 0.08 V Å^-1 both for hydrophobic ILs 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTF₂] and SPC/E water droplets. However, for the hydrophilic IL, 1-ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄], the droplet was entirely elongated to column-shaped at E = 0.09 V Å^-1 for lower weight percentages of ILs and at E = 0.15 V Å^-1 for a higher weight percentage of ILs (i.e., 50 wt%). We explored the impact of the electric field through various parameters such as mass and charge density distribution across the droplet, contact angle of the droplet, orientation of water dipoles, and hydrogen bond analysis. The external electric field was found to influence the orientation of water dipoles and the accumulation of charge at various interfaces was observed with an increase in an electric field, which finally leads to shape deformation and depletion of ions from the liquid-vapor interface of the droplet. However, this behavior strongly depends on the hydrophilicity or hydrophobicity of the ILs and thus, is critically examined for both the ILs.

Deciphering Solvation Effects in Aqueous Binary Mixtures by Fluorescence Behavior of 4-Aminophthalimide: The Comparison Between Ionic Liquids and Alcohols as Cosolvents

Ionic liquids (ILs) have received attention for many years due to them being very promising as green solvent substitutes, but they are not fully understood, especially their behavior dissolved in other solvents, for example, water. Thus, the goal of this contribution is to show insight into the different IL-water mixtures interaction. In this way, two protic ILs (PILs), ethylammonium nitrate (EAN) and 1-methylimidazolium acetate (MIA), mixed with water were investigated. To study the PILs-water interaction, the unique spectroscopical behavior in water of the molecular probe 4-aminophthalimide (4-AP) was used. 4-AP emission spectra show hypsochromic shifting by changing the excitation wavelength and, using time-resolved spectroscopy, can be detected by a blue shifting with time. Also, the water mixture of an aprotic IL, 1-methyl-3-butylimidazolium tetrafluoroborate (bmimBF₄), and three alcohols, methanol (MeOH), 2-propanol (2-PrOH), and t-butanol (t-BOH), were investigated for comparison. Our results show that the water-ILs interaction is dominated by the size of the IL components, in particular, the cation size. Thus, in MIA-water and bmimBF₄-water mixtures, 4-AP is mostly solvated by the IL, even at a low IL molar fraction, as in the t-BOH-water mixture. This finding is especially interesting when ILs-water mixtures are used as a solvent in an organic reaction, where it may call attention to water probably not being the solvent that is interacting with the reactants.

Hydrogen Bond Kinetics, Ionic Dynamics, and Voids in the Binary Mixtures of Protic Ionic Liquids with Alkanolamines

Classical molecular dynamics simulations were used to investigate the structural and dynamical properties of the mixtures of ionic liquids (ILs) with the conjugate forms of the cation in a 1:1 molar ratio. The experimental studies suggested the combination of ethanolamines and ILs as novel absorbents for acidic gases such as CO₂ and H₂S, which provide the advantage of efficient absorption of gases at low pressures. However, the microscopic properties of the ionic mixtures are not studied. From our computational investigations, the densities of mixtures are reported and compared with the experimental results. The structural evolution of mixtures is reported by radial distribution functions, coordination numbers, void analysis, and spatial distribution functions. The mixtures' dynamic properties were studied by analyzing the hydrogen bond, ion-pair, and ion-cage lifetimes of the system. Monoethanolammonium and triethanolammonium ILs show different types of spatial distribution functions. The cations have lesser effect on dynamics compared with anions. The charge on the anion greatly affects the dynamics of mixtures. The dianion mixtures show slower dynamics than the monoanionic mixtures. The hydrogen bonding between cations and anions is stronger than that between cations and neutral molecules due to strong coulombic attractive forces. The cations spend more time around the dianions as compared to monoanions. The distributions of voids show that the void sizes are smaller in triethanolamine-based mixtures. The sulfobenzoate-based mixtures show voids smaller than those of pyridine-3-carboxylate-based mixtures due to more available free space between the entities, which facilitates the overall dynamics.

Understanding the Photoexcitation of Room Temperature Ionic Liquids

Photoexcitation of (neat) room temperature ionic liquids (RTILs) leads to the observation of transient species that are reminiscent of the composition of the RTILs themselves. In this minireview, we summarize state-of-the-art in the understanding of the underlying elementary processes. By varying the anion or cation, one aim is to generally predict radiation-induced chemistry and physics of RTILs. One major task is to address the fate of excess electrons (and holes) after photoexcitation, which implies an overview of various formation mechanisms considering structural and dynamical aspects. Therefore, transient studies on time scales from femtoseconds to microseconds can greatly help to elucidate the most relevant steps after photoexcitation. Sometimes, radiation may eventually result in destruction of the RTILs making photostability another important issue to be discussed. Finally, characteristic heterogeneities can be associated with specific physicochemical properties. Influencing these properties by adding conventional solvents, like water, can open a wide field of application, which is briefly summarized.

Extended H-Bonding through Protic Ionic Liquids Facilitates the Growth and Stability of Water Domains in Hydrophobic Environment

Discrete water domains in hydrophobic environment find relevance in aerosols, oil refinery, the human body, etc. The interfacial microstructure plays a crucial role in the stability of such water domains. Over the decades, the amphiphile-induced electrostatic interaction is considered to be the major stabilizing factor operating at these interfaces. Here we take the representative water/AOT/oil microemulsion to show that creating a strong H-bonding network through suitable additive, such as protic ionic liquid (IL) at the interface, helps both the growth and stability of water domains in the hydrophobic phase. On the other hand, common electrolytes and aprotic ILs fail to replicate such behavior as seen by Raman, Fourier transform infrared spectroscopy, dynamic light scattering (DLS), and electron microscopy measurements. Experimental results are further supported by the all-atomic molecular dynamics (MD) simulations that showed extended H-bonding mediated by the protic IL cations that were localized at the interface. High temperature DLS and rheology studies have shown greater thermal stability and mechanical strengths of our biocompatible microemulsions, which have potential to become suitable templates for in situ synthesis of nanoparticle and various organic compounds.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

The Effect of Phenyl Substitutions on Microstructures and Dynamics of Tetraalkylphosphonium Bis(trifluoro- methylsulfonyl)imide Ionic Liquids

Extensive atomistic simulations demonstrated that a gradual substitution of hexyl chains with phenyl groups in tetraalkylphosphonium cations results in remarkable changes in hydrogen bonding interactions, liquid structures and scattering structural functions, and rotational dynamics of hexyl chains and phenyl groups in tetraalkylphosphonium bis(trifluoromethylsulfonyl)imide ionic liquids. Hydrogen donor sites in hexyl chains present competitive characteristics with those in phenyl groups in coordinating anions, as well as their continuous and intermittent hydrogen bonding dynamics. Cation-cation and anion-anion spatial correlations show concomitant shift to short distances with decreased peak intensities with variations of cation structures, whereas cation-anion correlations have a distinct shift to large radial distances due to decreased associations of anions with neighboring cations. These microstructural changes are qualitatively manifested in shifts of prominent peaks for prevalent charge alternations and adjacency correlations between ion species in scattering structural functions. Meanwhile, rotational dynamics of hexyl chains speed up, which, in turn, slow down rotations of phenyl groups, whereas anions exhibit imperceptible changes in their rotational dynamics. These computational results are intrinsically correlated with conformational flexibilities, molecular sizes, and steric hindrance effects of phenyl groups in comparison with hexyl chains, and constrained distributions of anions around cations in heterogeneous ionic environments.

The wetting behavior of aqueous imidazolium based ionic liquids: a molecular dynamics study

Aqueous ionic liquids are of particular interest due to their tunability of physical and chemical properties and a deeper understanding of their structure-property relationship is desired. Molecular dynamics (MD) simulations were conducted to study the wetting behavior of aqueous imidazolium-based ionic liquids (ILs), consisting of a 1-ethyl-3-methylimidazolium [EMIM]+ cation and either a hydrophilic boron tetrafluoride [BF4]- or a hydrophobic bis(trifluoromethylsulfonyl)imide [NTF2]- anion mixed in water. To understand the effect of anion and concentration of ILs at the graphite solid-liquid interface, wettability studies were performed with IL concentrations from 0-50 wt%. The contact angle of aqueous IL droplets decreases with increasing IL concentration. Droplet characteristics near the surface were investigated by profiling the density perpendicular (z-direction) and horizontal (r-direction) to the graphite sheet; this was further quantified by an orientation order parameter. Due to the preferred adsorption of ILs, water depletes near the surface as IL concentration increases. The hydrophobic [NTF2]- anion forces the IL toward the interface from the bulk, whereas the hydrophilic [BF4]- anion causes the IL to remain in the bulk of the droplet. Differences in water-anion hydrogen bonding, the nature of the anions, and their interfacial tensions are crucial factors in the wetting behavior of aqueous ionic liquids.

Short-Range Order and Transport Properties in Mixtures of the Protic Ionic Liquid [C2HIm][TFSI] with Water or Imidazole

We investigate the effect of adding different molecular cosolvents, water or imidazole, to the protic ionic liquid 1-ethylimidazolium bis(trifluoromethanesulfonyl)imide, i.e., [C₂HIm][TFSI]. We explore how the added cosolvent distributes within the ionic liquid by means of molecular dynamics simulations and X-ray scattering. We also analyze the degree of short-range heterogeneity in the resulting mixtures, finding that while imidazole easily mixes with the protic ionic liquid, water tends to form small clusters in its own water-rich domains. These differences are rationalized by invoking the nature of intermolecular interactions. In aqueous mixtures water-water hydrogen bonds are more likely to form than water-ion hydrogen bonds (water-TFSI bonds being particularly weak), while imidazole can interact with both cations and anions. Hence, the cation-anion association is negligibly influenced by the presence of water, whereas the addition of imidazole creates solvent-separated ion pairs and is thus able to also increase the ionicity. As a consequence of these structural and interactional features, transport properties like self-diffusion and ionic conductivity also show different composition dependencies. While the mobility of both ions and solvent is increased considerably by the addition of water, upon adding imidazole this property changes significantly only for molar fractions of imidazole above 0.6. At these molar fractions, which correspond to a base-excess composition, the imidazole/[C₂HIm][TFSI] mixture behaves as a glass-forming liquid with suppressed phase transitions, while homomixtures such as imidazole/[HIm][TFSI] can display a eutectic point.

Molecular Dynamics Study of the Effect of Water on Hydrophilic and Hydrophobic Ionic Liquids

We performed molecular dynamics (MD) simulations of ionic liquid (IL)-water mixtures to investigate the effects of water addition. The IL cation 1-butyl-3-methylimidazolium ([C₄mim]) and the four anions, nitrate (NO₃), tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethanesulfonyl)imide (NTf₂), were used to examine the effects of differences in hydrophobicity and anion size. The radial distribution functions of water-water have two different water content dependences. In NO₃ and BF₄ systems, the effect of water-anion-water structures connected by hydrogen bonds due to the strong interaction of anion-water is large. The growth of water clusters changes the peak heights of the radial distribution functions in PF₆ and NTf₂ systems. The increase in the diffusion constant is small in the NO₃ system but is not small in the other systems. The relaxation time of the anion-water hydrogen bonds in the NO₃ system is much longer than those in the other systems. It is the reason for the low water content dependency of the diffusion constants of the NO₃ system. The water constant dependences of structures in NO₃ and BF₄ systems are similar, but that in the diffusion constant is not. The BF₄ system shows hydrophilic features in the structural change and hydrophobic features in the water content dependences of the diffusion constant. The addition of water molecules provides various hydrophobicity/hydrophilicity of anions.

Photoinduced Bimolecular Electron Transfer in Ionic Liquids: Cationic Electron Donors

Recently, we have reported a systematic study of photoinduced electron-transfer reactions in ionic liquid solvents using neutral and anionic electron donors and a series of cyano-substituted anthracene acceptors [ Wu , B. ; Maroncelli , M. ; Castner , E. W. Jr Photoinduced Bimolecular Electron Transfer in Ionic Liquids . J. Am. Chem. Soc. 139 , 2017 , 14568 ]. Herein, we report complementary results for a cationic class of 1-alkyl-4-dimethylaminopyridinium electron donors. Reductive quenching of cyano-substituted anthracene fluorophores by these cationic quenchers is studied in solutions of acetonitrile and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. Varying the length of the alkyl chain permits tuning of the quencher diffusivities in solution. The observed quenching kinetics are interpreted using a diffusion-reaction analysis. Together with results from the prior study, these results show that the intrinsic electron-transfer rate constant does not depend on the quencher charge in this family of reactions.