Direct Anionic Effect on Water Structure and Indirect Anionic Effect on Peptide Backbone Hydration State Revealed by Thin-Layer Infrared Spectroscopy

Dentin primer based on a highly functionalized gelatin-methacryloyl hydrogel

Gelatin-methacryloyl hydrogels (GelMA) have demonstrated their utility as scaffolds in a variety of tissue engineering applications.

OBJECTIVES

In this study, a highly functionalized GelMA hydrogel was synthesized and assessed for degree of functionalization. As the proposed GelMA hydrogel was coupled to a visible-light photoinitiator, we hypothesized it might serve as base to formulate a model dentin primer for application in restorative dentistry.

METHODS

GelMA was mixed with photoinitiator lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), photopolymerized for 0-40 s using a dental light-curing device and tested for extrudability, degree of photo-crosslinking (DPxlink), water sorption/solubility/swelling (WS/SL/SW) and apparent modulus of elasticity (AE). Model dentin primer was prepared by mixing GelMA+LAP with a primer of a commercial three-step etch-and-rinse adhesive. After application of GelMA-based primer to acid-etched dentin, samples were bonded with correspondent adhesive agent, photopolymerized and had their immediate bond strength compared to control samples primed and bonded with the same commercial material.

RESULTS

Extrudability of hydrogel was confirmed using a microsyringe to write the acronym "CDMI". DPxlink of GelMA+LAP changed significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s). WS, SL and SW were significantly reduced in hydrogels polymerized for 30 and 40 s. AE of hydrogels varied significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s; 20 s ‡ 40 s). Bond strength of dentin primed with GelMA-based primer was lower (∼29.3 MPa) but not significantly of that of control (∼34.6 MPa).

CONCLUSIONS

Optimization of a GelMA-based dentin primers can lead to the development of promising biomimetic adhesives for dentin rehabilitation.

Conformation and Metal Cation Binding of Zwitterionic Alanine Tripeptide in Saline Solutions by Infrared Vibrational Spectroscopy and Molecular Dynamics Simulations

In this work, linear infrared (IR) spectroscopy and molecular dynamics (MD) simulations were used to examine the interaction of different metal cations (Na⁺, Ca²⁺, Mg²⁺, and Zn²⁺) with backbone (amide C═O) and C-terminal carboxylate (COO^-) groups in zwitterionic alanine tripeptide (Ala3) in aqueous solutions with varying saline concentrations. Circular dichroism spectra and MD results suggest that Ala3 is predominantly in polyproline-II (PP_II) conformation, whose amide-I and asymmetric carboxylate stretching IR vibration signatures are also supported by quantum-chemistry calculations. The zwitterionic form of Ala3 separates the two amide-I modes in frequency, which are weakly coupled modes, as revealed by two-dimensional IR measurement, and can be used to probe backbone-cation interactions at different scenarios (near charged or neutral chemical groups respectively). Cation concentration-dependent IR frequency red shifts in the amide-I mode are seen for both amide-I modes, whereas blue shifts are also seen in the amide-I mode far from the NH₃⁺ group. The observed spectral changes are discussed from the perspective of the salting-in and salting-out abilities of the cations. In addition, all the metal cations studied here (except Zn²⁺) can specifically coordinate to the COO^- group in bidentate and pseudo-bridging forms simultaneously. For Zn²⁺, only the pseudo-bridging form exists. Our results shed light on the macroscopic protein salting-in and salting-out phenomena from the perspective of key chemical bonds in peptides.

Hydrogen Bonding and Solvation of a Proline-Based Peptide Model in Salt Solutions

The hydrogen bonding of water and water/salt mixtures around the proline-based tripeptide model glycyl-l-prolyl-glycinamide·HCl (GPG-NH₂) is investigated here by multi-wavelength UV resonance Raman spectroscopy (UVRR) to clarify the role of ion–peptide interactions in affecting the conformational stability of this peptide. The unique sensitivity and selectivity of the UVRR technique allow us to efficiently probe the hydrogen bond interaction between water molecules and proline residues in different solvation conditions, along with its influence on trans to cis isomerism in the hydrated tripeptide. The spectroscopic data suggest a relevant role played by the cations in altering the solvation shell at the carbonyl site of proline_., while the fluoride and chloride anions were found to promote the establishment of the strongest interactions on the C=O site of proline. This latter effect is reflected in the greater stabilization of the trans conformers of the tripeptide in the presence of these specific ions. The molecular view provided by UVRR experiments was complemented by the results of circular dichroism (CD) measurements that show a strong structural stabilizing effect on the β-turn motif of GPG-NH₂ observed in the presence of KF as a co-solute.

Specific and non-specific interactions between metal cations and zwitterionic alanine tripeptide in saline solutions reported by the symmetric carboxylate stretching and amide-II vibrations

The "specific" interaction between metal cations (Na⁺, Ca²⁺, Mg²⁺, and Zn²⁺) and the charged COO^- group, and the "non-specific" interaction between these cations and the peptide backbone of a zwitterionic trialanine (Ala3) in aqueous solutions were examined in detail, using linear infrared (IR) absorptions of the COO^- symmetric stretching and the amide-II (mainly the C-N stretching) modes as IR probes. Different IR spectral changes in peak positions and intensities of the two IR probes clearly demonstrate their sensitivities to nearby cation distributions in distance and population. Quantum chemistry calculations and molecular dynamics simulations were used to describe the cation-peptide interaction picture. These combined results suggest that Na⁺ and Ca²⁺ tend to bind to the COO^- group in the bidentate form, while Mg²⁺ and Zn²⁺ tend to bind to the COO^- group in the pseudo-bridging form. The results also show that while all three divalent cations indirectly interact with the peptide backbone with large population, Ca²⁺ and Mg²⁺ can be sometimes distributed very close to the backbone. Such a non-specific cation interaction can be moderately sensed by the C-N stretching of the amide-II mode when cations approach the polar amide C[double bond, length as m-dash]O group, and is also influenced by the NH₃⁺ charge group located at the N-terminus. The results suggest that the experimentally observed complication of the Hofmeister cation series shall be understood as a combined specific and non-specific cation-peptide interactions.

Combining Co-Amorphous-Based Spray Drying with Inert Carriers to Achieve Improved Bioavailability and Excellent Downstream Manufacturability

It is crucial to improve poorly water-soluble orally administered drugs through both preclinical and therapeutic drug discovery. A co-amorphous formulation consisting of two low molecular weight (MW) molecules offers a solubility/dissolubility advantage over its crystalline form by maintaining their amorphous status. Here, we report on a co-amorphous solid dispersion (SD) system that includes inert carriers (lactose monohydrate or microcrystalline cellulose) and co-amorphous sacubitril (SAC)-valsartan (VAL) using the spray drying process. The strong molecular interactions between drugs were the driving force for forming robust co-amorphous SDs. Our system provided the highest solubility with more than ~11.5- and 3.12-times solubility increases when compared with the physical mixtures. Co-amorphous lactose monohydrate (LM) SDs showed better bioavailability of APIs (~356.27.8% and 154.01% for the relative bioavailability of LBQ 657 and valsartan, respectively). Co-amorphous inert carrier SDs possessed an excellent compressibility for the production of a direct compression pharmaceutical product. In conclusion, these brand-new co-amorphous SDs could reduce the number of unit processes to produce a final pharmaceutical product for downstream manufacturability.

Expansion of Ion Effects on Water Induced by a High Hydrophilic Surface of a Polymer Network

The spatial extent and anion-cation cooperativity of the ion effect on the structure and dynamics of water have long been debated but are still controversial. Previously, we experimentally demonstrated the extensive and cooperative effect of ions on water in a polyamide network by measuring the reflection wavelength (λ) on the ion sensor of poly(N-isopropylacrylamide) (PNIPAAm) hydrogel-immobilized photonic crystals. In the present study, we investigated the influence of the polymer surface on the ion effect by adopting a highly hydrophilic poly(N-isopropylacrylamide-co-N-acryloylaza-18-crown-6) hydrogel as a sensor matrix. In alkaline earth metal salt solutions, the copolymer hydrogel membrane sensor showed the redshift of λ for the specific combination of cations and anions, that is, Ca²⁺/Cl^- and Sr²⁺/NO₃^-, which resulted from the concerted binding of ion pairs to the copolymer receptor. In alkali metal salt solutions, the ion sensor showed the blueshift of λ originating from the osmotic dehydration suppressed by the salts. The strength of the ion effect was evaluated by the average osmotic pressure (Π_A) required for the salt-inhibited dehydration in the early stage of hydrogel contraction. From the calculation results of Π_A for the copolymer and PNIPAAm hydrogels, it was found that the high hydrophilic copolymer surface more significantly enhanced the ion effect of structure-making cations (i.e., Li⁺) compared with borderline (Na⁺) and structure-breaking (K⁺ and Cs⁺) cations. Furthermore, the ion effect exhibited the higher ion cooperativity in combination with chloride anions than with nitrate anions. The enhancement of the long-range cooperative ion effect is derived from the expansion of the interactions between ions, water molecules, and the hydrophilic polymer network.

Quantitative Evaluation of Long-Range and Cooperative Ion Effect on Water in Polyamide Network

Despite long-standing research efforts to elucidate the specific ion effect on the structure and dynamics of water, the spatial extent affected by ions and the cooperativity of ions and counterions are still controversial. Here, we demonstrate an undoubtable evidence of long-range and cooperative ion effect on water molecules in a polyamide network by using a precision ion sensor of photonic crystal hydrogel membrane. The ion effect was quantitatively evaluated by means of the osmotic work per unit cell volume change of photonic crystal, W_unit, required for the ion-inhibited dehydration, which means a suppressed migration of water molecules by the extensive effect of ions beyond their immediate hydration shells. It was found that  W_unit required for 14 vol % contraction of the membrane sensor in LiCl aqueous solutions was 7.7 times larger than that in Sr(NO₃)₂ solutions. The combination of structure-making Ca²⁺ and Sr²⁺ with nitrate anions lowered the ion effect than the chloride salts of borderline Na⁺ and Ba²⁺. Furthermore, the nitrate salt of Sr²⁺ exhibited a lower ion effect than the chloride salts of structure-breaking K⁺ and Cs⁺. These results have revealed that the ion effect acts to water extensively, which is modulated by cooperative interactions of ions and counterions.