Global Small-Angle X-ray Scattering Data Analysis of Triacylglycerols in the Molten State (Part I)

A scalable and eco-friendly carbohydrate-based oleogelator for vitamin E controlled delivery

Supramolecular oleogels, in which low-molecular weight oleogelators self-assemble into various nanostructures through non-covalent interactions, have witnessed increasing research activity in various fields of science, including food, cosmetics or remediation of marine oil spills. Herein, we report a simple scalable and environmentally friendly carbohydrate-based oleogelator, namely, the sodium salt of N,N'-dimethyl β-C glucosyl barbiturate (GlcBMe) that self-assembles through sonication to induce the gelation of polar organic solvent and later of non-polar vegetable oils by cationic exchange with quaternary ammonium surfactants. Water-soluble GlcBMe was capable of forming self-assembled fibrillar network bridging insoluble particles in the oil by sonication in the presence of a small amount of water. The rheological properties are reinforced by in situ particle bridging with quaternary ammonium surfactants as evidenced by multi-scale structural analyses. IR analysis indicated that -OH (from carbohydrates) and -C[double bond, length as m-dash]O (from barbituric ring) were involved in hydrogen bonding promoting the formation of a fibrous network. The oleogel presented a non-Newtonian system showing a shear-thinning behavior and thixotropic properties. Advantageously, these oleogels showed excellent control and slow release of the loaded-vitamin E in a pH-dependent manner.

Nanostructure Formation in Glycerolipid Films during Enzymatic Hydrolysis: A GISAXS Study

Responsive nanostructured films from food-grade lipids can be valuable for food, pharmaceutical, and biotechnological science. Lyotropic liquid crystalline structures that respond to enzymes in their environment can, for instance, be innovated as drug delivery platforms or biosensors. However, the structural changes that such films undergo during enzymatic reactions with lipase are not yet understood. This work demonstrates the preparation of mesostructured lipid films from the food-grade lipids glycerol monooleate (GMO) and triolein on silicon wafers and their digestion with pancreatic lipase using time-resolved synchrotron grazing incidence small-angle X-ray scattering (GISAXS). The film structure is compared with the corresponding GMO/triolein bulk phases in excess water. Increasing the GMO/triolein ratio in the film makes it possible to modulate the structure of the films from oil coatings to inverse hexagonal and inverse bicontinuous cubic films. Pancreatic lipase triggered swelling of the internal film nanostructure and eventually structural transformation inside the film. Orientation and reorientation of the internal film structure relative to the silicon wafer surface were observed during the preparation of the films and their digestion. The findings contribute to the understanding of self-assembly in thin films and guide the development of enzyme-responsive coatings for the functional modification of various substrates.

Isotropic liquid state of cocoa butter

The complex crystal structure of coca butter (CB) is responsible for the unique melting behavior, surface gloss, and mechanical properties of chocolate. While most studies concentrated on the crystalline state of CB, few studied the isotropic liquid state, which has a major impact on the crystallization process and the characteristics of the resulting crystals. In this study, the molecular organizations of the main CB triacylglycerols (TAGs; 1,3-dipalmitoyl-2-oleoylglycerol, palmitoyl-oleoyl-stearoylglycerol, POS, and 1,3-distearoyl-2-oleoylglycerol) were studied. The findings revealed the tunning-fork (Tf) conformation, commonly found in the crystalline state, is the least abundant in the isotropic liquid state of CB and pure TAGs. Notably, POS was found to interact with itself in CB, while its molecules with Tf conformation, although in small amounts in the mixture, tend to pair with each other at lower temperatures. These results highlight the significance of POS in CB crystallization and provide insights for developing CB alternatives.

Polymorphic phase transitions in triglycerides and their mixtures studied by SAXS/WAXS techniques: In bulk and in emulsions

Triacylglycerols (TAGs) exhibit a monotropic polymorphism, forming three main polymorphic forms upon crystallization: α, β' and β. The distinct physicochemical properties of these polymorphs, such as melting temperature, subcell lattice structure, mass density, etc., significantly impact the appearance, texture, and long-term stability of a wide range products in the food and cosmetics industries. Additionally, TAGs are also of special interest in the field of controlled drug delivery and sustained release in pharmaceuticals, being a key material in the preparation of solid lipid nanoparticles. The present article outlines our current understanding of TAG phase behavior in both bulk and emulsified systems. While our primary focus are investigations involving monoacid TAGs and their mixtures, we also include illustrative examples with natural TAG oils, highlighting the knowledge transfer from simple to intricate systems. Special attention is given to recent discoveries via X-ray scattering techniques. The main factors influencing TAG polymorphism are discussed, revealing that a higher occurrence of structural defects in the TAG structure always accelerates the rate of the α → β polymorphic transformation. Diverse approaches can be employed based on the specific system: incorporating foreign molecules or solid particles into bulk TAGs, reducing drop size in dispersed systems, or using surfactants that remain fluid during TAG particle crystallization, ensuring the necessary molecular mobility for the polymorphic transformation. Furthermore, we showcase the role of TAG polymorphism on a recently discovered phenomenon: the creation of nanoparticles as small as 20 nm from initial coarse emulsions without any mechanical energy input. This analysis underscores how the broader understanding of the TAG polymorphism can be effectively applied to comprehend and control previously unexplored processes of notable practical importance.

Structural and thermodynamic properties of bulk triglycerides and triglyceride/water mixtures reproduced using a polarizable coarse-grained model

Triglycerides (TGs) play important roles in renewable energies, food production, medicine, and metabolism in organisms. Here, we developed a novel coarse-grained (CG) force field (FF) for triglycerides to reproduce both the structural and thermodynamic properties of bulk TGs, TG/air interfaces, and TG/water mixtures using molecular dynamics (MD) simulations. We rigorously optimized the bonded and nonbonded force parameters between the CG beads of TGs and nonbonded force parameters between TG beads and polarizable CG water beads by employing an efficient meta-multilinear interpolation parameterization algorithm recently developed by us. This CG FF performs very well in reproducing the percolating network of the TG bulk phase self-assembled in water and a variety of molecular conformations predicted by all-atom MD simulations. More importantly, it also correctly reproduces multiple experimentally measurable macroscopic thermodynamic properties, including the density and surface tensions of both the TG/air and TG/water interfaces. This paves the way for studying more complicated systems involving TGs on a large scale.

Polymorphism of a Highly Asymmetrical Triacylglycerol in Milk Fat: 1-Butyryl 2-Stearoyl 3-Palmitoyl-glycerol

Milk fat has more than 200 triacylglycerols (TAGs), which play a pivotal role in its crystallization behavior. Asymmetrical TAGs containing short butyryl chains contribute to a significant portion of milk fat TAGs. This work aims to elucidate the crystallization behavior of asymmetrical milk fat TAGs by employing the pure compound of 1-butyryl 2-stearoyl 3-palmitoyl-glycerol (BuSP). The structural evolution of BuSP after being cooled down to 20 °C from the melt is evaluated by small- and wide-angle X-ray scattering (SAXS and WAXS) and differential scanning calorimetry (DSC). The temporal structural observation shows that BuSP crystallizes into the α-form with short and long spacings of 4.10 and 56.9 Å, respectively, during the first hour of isothermal hold at 20 °C. The polymorphic transformation of the α to β' phase occurred after 4 h of isothermal hold, and the β'- to α-form fraction ratio was about 70:30 at the end of the isothermal experiment (18 h). Pure β'-form X-ray patterns are obtained from the BuSP powder with short spacings of 4.33, 4.14, and 3.80 Å, while the long spacing of 51.2 Å depicts a three-chain-length lamellar structure with a tilt angle of 32°. Corresponding DSC measurements display that BuSP crystallizes from the melt at 29.1 °C, whereas the melting of α- and β'-forms was recorded at 30.3 and 47.8 °C, respectively. In the absence of the β-form, the β'-polymorph is the most stable observed form in BuSP. This work exemplarily explains the crystallization behavior of asymmetrical milk fat TAGs and thus provides new insights into their role in overall milk fat crystallization.

Crystal Memory near Discontinuous Triacylglycerol Phase Transitions: Models, Metastable Regimes, and Critical Points

It is proposed that "crystal memory", observed in a discontinuous solid-liquid phase transition of saturated triacylglycerol (TAG) molecules, is due to the coexistence of solid TAG crystalline phases and a liquid TAG phase, in a superheated metastable regime. Such a coexistence has been detected. Solid crystals can act as heterogeneous nuclei onto which molecules can condense as the temperature is lowered. We outlined a mathematical model, with a single phase transition, that shows how the time-temperature observations can be explained, makes predictions, and relates them to recent experimental data. A modified Vogel-Fulcher-Tammann (VFT) equation is used to predict time-temperature relations for the observation of "crystal memory" and to show boundaries beyond which "crystal memory" is not observed. A plot of the lifetime of a metastable state versus temperature, using the modified VFT equation, agrees with recent time-temperature data. The model can be falsified through its predictions: the model possesses a critical point and we outline a procedure describing how it could be observed by changing the hydrocarbon chain length. We make predictions about how thermodynamic functions will change as the critical point is reached and as the system enters a crossover regime. The model predicts that the phenomenon of "crystal memory" will not be observed unless the system is cooled from a superheated metastable regime associated with a discontinuous phase transition.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Early stages of fat crystallisation evaluated by low-field NMR and small-angle X-ray scattering

Low-field time-domain nuclear magnetic resonance (NMR; 20 MHz) is commonly used in the studies of fats in the form of solid fat content (SFC) measurements. However, it has the disadvantage of low sensitivity to small amounts of crystalline material (0.5%), thus often incorrectly determining crystallisation induction times. From spin-lattice relaxation rate measurements (R₁ ) during the isothermal crystallisation measurements of cocoa butter between 0.01 and 10 MHz using fast field cycling NMR, we learnt previously that the most sensitive frequency region is below 1 MHz. Thus, we focused on analysing our 10-kHz data in detail, by observing the time dependence of R₁ and comparing it with standard SFC_NMR and SFC determinations from small-angle X-ray scattering (SFC_SAXS ). Although not reflecting directly the SFC, the R₁ at this low frequency is very sensitive to changes in molecular aggregation and hence potentially serving as an alternative for determination of crystallisation induction times. Alongside R₁ , we also show that SFC_SAXS is more sensitive to early stages of crystallisation, that is, standard SFC_NMR determinations become more relevant when crystal growth starts to dominate the crystallisation process but fail to pick up earlier crystallisation steps. This paper thus demonstrates the potential of studying triacylglycerols at frequencies below 1 MHz for obtaining further understanding of the early crystallisation stages of fats and presents an alternative and complementary method to estimate SFC by SAXS.