Epitaxial Crystallization of Isotactic Poly(methyl methacrylate) from Different States on Highly Oriented Polyethylene Thin Film

Alignment of organic conjugated molecules for high-performance device applications

High-performance organic semiconductor materials as the electroactive components of optoelectronic devices have attracted much attention and made them ideal candidates for solution-processable, large-area, and low-cost flexible electronics. Especially, organic field-effect transistors (OFETs) based on conjugated semiconductor materials have experienced stunning progress in device performance. To make these materials economically viable, comprehensive knowledge of charge transport mechanisms is required. The alignment of organic conjugated molecules in the active layer is vital to charge transport properties of devices. The present review highlights the recent progress of processing-structure-transport correlations that allow the precise and uniform alignment of organic conjugated molecules over large areas for multiple electronic applications, including OFETs, organic thermoelectric devices (OTEs), and organic phototransistors (OPTs). Different strategies for regulating crystallinity and macroscopic orientation of conjugated molecules are introduced to correlate the molecular packing, the device performance and charge transport anisotropy in multiple organic electronic devices. This article is protected by copyright. All rights reserved.

Recent advances in polymeric transdermal drug delivery systems

Transdermal delivery has proven to be one of the most favorable methods among novel drug delivery systems. Since drugs administered by transdermal delivery systems avoid the gastrointestinal tract, and thus avoid conversion by the liver, the likelihood of liver dysfunction and gastrointestinal tract irritation as side effects is low. Drug delivery through the skin has other advantages, such as maintaining an effective rate of drug delivery over time, a steady rate of circulation, and the benefits of a passive delivery system and diffusion. Transdermal drug delivery is achieved using patches which consist of different and specific layers. In the last few decades, many types of patches have been approved worldwide, such as medical plasters, which have been generally applied to the skin for localized diseases. Such patches can be traced back to ancient China (around 2000 BCE) and are the early precursors of today's transdermal patches. With the help of effective design, materials, manufacturing, and evaluation, a large number of drugs can now be administered using this valuable advanced technology. This study reviews different types of polymer patches, their advantages and disadvantages, and different studies related to transdermal drug delivery methods, and the advantages and disadvantages of each method. Different mechanisms of transdermal drug delivery system with patches are also discussed.

Orientation of Poly(ε-caprolactone) in Its Poly(vinyl chloride) Blends Crystallized under Strain: The Role of Strain Rate

The blends of high and low molecular weights poly(ε-caprolactone) (PCL) with poly(vinyl chloride (PVC) were prepared. The samples before and after the crystallization of PCL were uniaxially stretched to different draw ratios. The orientation features of PCL in a stretched crystalline PCL/PVC blend and crystallized from the amorphous PCL/PVC blends under varied strains were studied by wide-angle X-ray diffraction (WAXD) diffraction. It was found that a uniaxial stretching of crystalline PCL/PVC blend with high molecular weight PCL results in the c-axis orientation along the stretching direction, as is usually done for the PCL bulk sample. For the stretched amorphous PCL/PVC blend samples, the crystallization of high molecular weight PCL in the blends under a draw ratio of λ = 3 with a strain rate of 6 mm/min leads to a ring-fiber orientation. In the samples with draw ratios of λ = 4 and 5, the uniaxial orientation of a-, b-, and c-axes along the strain direction coexist after crystallization of high molecular weight PCL. With a draw ratio of λ = 6, mainly the b-axis orientation of high molecular weight PCL is identified. For the low molecular weight PCL, on the contrary, the ring-fiber and a-axis orientations coexist under a draw ratio of λ = 3. The a-axis orientation decreases with the increase of draw ratio. When the λ reaches 5, only a poorly oriented ring-fiber pattern has been recognized. These results are different from the similar samples stretched at a higher strain rate as reported in the literatures and demonstrate the important role of strain rate on the crystallization behavior of PCL in its blend with PVC under strain.

Morphological Evolution of Tetrachlorinated Perylene Bisimides with Lengthy Alkyl Substituent Polycrystalline Thin Films during Reversible Phase Transitions

The phase behavior and related morphological evolution of thin films of lengthy alkyl substituted core-tetrachlorinated perylene bisimide (C18-4ClPBI), a large π-conjugated molecule, have been studied. It is found that the C18-4ClPBI can exist in two different crystalline phases depending on temperature, which transform reversibly in heating and cooling processes. The X-ray diffraction results demonstrate that the two crystalline forms of C18-4ClPBI exhibit a similar packing geometry but with different unit cell dimensions. It is confirmed that the low-temperature phase is packed more compactly than its high-temperature counterpart. During high-temperature to low-temperature crystalline phase transition, nonbirefringent protrusions were observed, which disassembled in the reverse crystalline phase transition process during heating. The exact formation mechanism of the protrusions is not clear at the moment. Nevertheless, their influence on the transfer characteristics of the polycrystalline C18-4ClPBI thin film has been clearly illustrated.