Effect of Triclosan and Chloroxylenol on Bacterial Membranes

Hormesis and synergistic effects of disinfectants chloroxylenol and benzethonium chloride on highly efficient heterotrophic nitrification-aerobic denitrification functional strain: From performance to mechanism

The heterotrophic nitrification-aerobic denitrification (HNAD) strain Exiguobacterium H1 (H1) was isolated in this study. The changes in nitrogen metabolism functions of H1 strain were discussed in presence of disinfectants chloroxylenol (PCMX) and benzethonium chloride (BEC) alone and combined pollution (PCMX+BEC). The H1 strain could use NH4+-N, NO2--N and NO3--N as nitrogen sources and had good nitrogen removal performance under conditions of C/N ratio 25, pH 5-8, 25-35 oC and sodium acetate as carbon. PCMX and BEC alone exhibited hormesis effects on H1 strain which promoted the growth of H1 strain at low concentrations but inhibited it at high concentrations, and combined pollution showed synergistic inhibitory on H1 strain. H1 strain owned a full nitrogen metabolic pathway according to functional genes quantification. PCMX encouraged nitrification process of H1, while BEC and combined pollution mostly blocked nitrogen removal. PCMX, but not BEC, mainly led to the enrichment of resistance genes. These findings will aid in systematic assessment of contaminant tolerance characteristics of HNAD strain and its application prospects.

Effect of disinfectants on multispecies biofilm, the physical and mechanical properties of polymethyl methacrylate, and the corrosion of cobalt chromium alloy

STATEMENT OF PROBLEM

The optimal disinfection protocol that controls adverse effects and promotes effective antimicrobial action on removable prostheses is unclear.

PURPOSE

This in vitro study investigated the effect of disinfectant solutions on the biological, physical, mechanical, and chemical properties of removable prosthesis materials.

MATERIAL AND METHODS

Specimens of polymethyl methacrylate (PMMA) and cobalt chromium (Co-Cr) alloy were immersed in distilled water (PMMA) or artificial saliva (Co-Cr) as the control and in 0.25% sodium hypochlorite (NaOCl0.25%), 0.5% chloramine T (CT0.5%), and 0.15% Triclosan (TR0.15%). The antibiofilm activity was evaluated by microbial load and cell metabolisms of the mixed biofilm. Physical (color change, sorption, solubility, and surface roughness), mechanical (hardness, flexural, and impact strength), and chemical (corrosion) properties were analyzed before and after simulating a 5-year immersion. Laser confocal microscopy, scanning electron microscopy (SEM), and dispersive energy spectroscopy (EDS) complemented the analyses. The data were analyzed by using the Mann-Whitney U test, Kruskal-Wallis with Dunn posttests, 1-way ANOVA, and repeated measures ANOVA (α=.05).

RESULTS

All solutions were effective against bacteria, but only NaOCl0.25% eliminated Candida spp. TR0.15%, and CT0.5% increased cell metabolisms. For interaction (time and solution), there was a reduction in PMMA hardness in the control and TR0.15%. Color, sorption, solubility, and flexural strength did not change. CT0.5% and TR0.15% were similar for impact resistance. CT0.5% caused the lowest roughness. NaOCl0.25% showed the greatest corrosive potential. Dark spots were seen under SEM in Co-Cr stored with NaOCl0.25% and TR0.15%. EDS indicated different proportions of oxygen, cobalt, chromium, and molybdenum.

CONCLUSIONS

NaOCl0.25% had the best antimicrobial action. CT0.5% and TR0.15% have potential. Hardness and roughness changes were clinically acceptable, and the other properties remained unchanged. All the solutions caused color changes. NaOCl0.25% was unsatisfactory for use with Co-Cr, CT0.5% was intermediate, and TR0.15% was suitable.

Long-term influence of chloroxylenol on anaerobic microbial community: Performance, microbial interaction, and antibiotic resistance gene behaviors

The use of antibacterial and disinfection products is increasing in recent years. Para-chloro-meta-xylenol (PCMX), a widely used antimicrobial agent, has been detected in various environments. Herein, the impacts of PCMX with long-term exposure on anaerobic sequencing batch reactors were investigated. The high concentration (50 mg/L, GH group) PCMX severely inhibited the nutrient removal process, and the low concentration group (0.5 mg/L, GL group) slightly affected the removal efficiency which was recovered after 120 days of adaptation compared to the control group (0 mg/L, GC group). Cell viability tests indicated that PCMX inactivated the microbes. A significant reduction in bacterial α-diversity was observed in the GH but not the GL group. The microbial communities were shifted upon PCMX exposure, among which Olsenella, Novosphingobium, and Saccharibacteria genera incertae Sedis became the predominant genera in the GH groups. Network analyses showed that PCMX significantly reduced the complexity and interactions of the microbial communities, consistent with the negative impacts on bioreactor performance. Real-time PCR analysis indicated that PCMX affected the behavior of antibiotic resistance genes (ARGs), and the relationship between ARGs and bacterial genera gradually became complicated after long-term exposure. Most detected ARGs decreased on Day 60 but increased on Day 120 especially in the GL group, implying the potential risk of environment-relevant concentration of PCMX in the ecosystems. This study provides new insights into the understanding of the impacts and risks of PCMX on wastewater treatment processes.

Triclosan to Improve the Antimicrobial Performance of Universal Adhesives

To solve the proble ms of composite restoration failure caused by secondary caries, this study reports a light curable antibacterial triclosan derivative (TCS-IH), which was synthesized and added to the existing commercial universal adhesive to achieve a long-term antibacterial effect The effect of mixing different mass percentages of TCS-IH on the bond strength of dentin was also investigated.TCS-IH was synthesized by solution polymerization and characterized by nuclear magnetic resonance hydrogen spectroscopy (1H NMR) and Fourier transform infrared (FTIR) spectroscopy. Two commercial universal adhesives, Single Bond Universal and All Bond Universal, were selected and used as the control group, and universal adhesives with different mass percentages (1 wt%, 3 wt%, 5 wt% and 7 wt%) of TCS-IH were used as the experimental group. The antibacterial properties were analysed by means of colony count experiments, biofilm formation detection, plotting of growth curves, biofilm metabolic activity detection, insoluble extracellular polysaccharide measurements and observations by confocal laser scanning microscopy and scanning electron microscopy (SEM). The effect of adhesives on biofilm formation, metabolism, extracellular matrix production, distribution of live and dead bacteria, and bacterial morphology of Streptococcus mutans (S. mutans) was analysed. The mechanical properties were evaluated by the degree of conversion and microtensile bonding strength under different conditions. Its biosafety was tested. We found that the addition of TCS-IH significantly improved the antibacterial performance of the universal adhesive, with the 5 wt% and 7 wt% groups showing the best antibacterial effect and effectively inhibiting the formation of biofilm. In addition, the adhesive strength test results showed that there was no statistical difference (p < 0.05) in the microtensile bond strength measured under various factors in all experimental groups except for the 7 wt% group in the self-etch bonding mode, and all of them had good biosafety. In summary, the 5 wt% group of antibacterial monomer TCS-IH was selected as the optimum addition to the universal adhesive to ensure the antimicrobial properties of the universal adhesive and the stability and durability of the adhesive interface. This study provides a reference for the clinical application of adhesives with antimicrobial activity to improve the stability and durability of adhesive restorations.

Cosmetic Preservatives: Hazardous Micropollutants in Need of Greater Attention?

In recent years, personal care products (PCPs) have surfaced as a novel class of pollutants due to their release into wastewater treatment plants (WWTPs) and receiving environments by sewage effluent and biosolid-augmentation soil, which poses potential risks to non-target organisms. Among PCPs, there are preservatives that are added to cosmetics for protection against microbial spoilage. This paper presents a review of the occurrence in different environmental matrices, toxicological effects, and mechanisms of microbial degradation of four selected preservatives (triclocarban, chloroxylenol, methylisothiazolinone, and benzalkonium chloride). Due to the insufficient removal from WWTPs, cosmetic preservatives have been widely detected in aquatic environments and sewage sludge at concentrations mainly below tens of µg L-1. These compounds are toxic to aquatic organisms, such as fish, algae, daphnids, and rotifers, as well as terrestrial organisms. A summary of the mechanisms of preservative biodegradation by micro-organisms and analysis of emerging intermediates is also provided. Formed metabolites are often characterized by lower toxicity compared to the parent compounds. Further studies are needed for an evaluation of environmental concentrations of preservatives in diverse matrices and toxicity to more species of aquatic and terrestrial organisms, and for an understanding of the mechanisms of microbial degradation. The research should focus on chloroxylenol and methylisothiazolinone because these compounds are the least understood.

In vitro study of the ecotoxicological risk of methylisothiazolinone and chloroxylenol towards soil bacteria

Methylisothiazolinone (MIT) and chloroxylenol (PCMX) are popular disinfectants often used in personal care products (PCPs). The unregulated discharge of these micropollutants into the environment, as well as the use of sewage sludge as fertilizer and reclaimed water in agriculture, poses a serious threat to ecosystems. However, research into their ecotoxicity towards nontarget organisms is very limited. In the present study, for the first time, the ecotoxicity of biocides to Pseudomonas putida, Pseudomonas moorei, Sphingomonas mali, and Bacillus subtilis was examined. The toxicity of MIT and PCMX was evaluated using the microdilution method, and their influence on the viability of bacterial cells was investigated by the AlamarBlue® test. The ability of the tested bacteria to form biofilms was examined by a microtiter plate assay. Intracellular reactive oxygen species (ROS) production was measured with CM-H2DCFDA. The effect of MIT and PCMX on phytohormone indole-3-acetic acid (IAA) production was determined by spectrophotometry and LC‒MS/MS techniques. The permeability of bacterial cell membranes was studied using the SYTOX Green assay. Changes in the phospholipid profile were analysed using LC‒MS/MS. The minimal inhibitory concentrations (MICs) values ranged from 3.907 to 15.625 mg L^-1 for MIT and 62.5 to 250 mg L^-1 for PCMX, indicating that MIT was more toxic. With increasing concentrations of MIT and PCMX, the cell viability, biofilm formation ability and phytohormone synthesis were maximally inhibited. Moreover, the growth of bacterial cell membrane permeability and a significantly increased content of ROS were observed, indicating that the exposure caused serious oxidative stress and homeostasis disorders. Additionally, modifications in the phospholipid profile were observed in response to the presence of sublethal concentrations of the chemicals. These results prove that the environmental threat posed by MIT and PCMX must be carefully monitored, especially as their use in PCPs is still growing.

The fate and behavior mechanism of antibiotic resistance genes and microbial communities in flocs, aerobic granular and biofilm sludge under chloroxylenol pressure

Chloroxylenol (PCMX), an antibacterial agent, has been widely detected in water environment and has toxic effects on biology and ecology. During 270 d, the influence of PCMX on the performance of three nitrification systems was investigated, including floc-based sequencing batch reactor (FSBR), aerobic granule-based SBR (AGSBR) and biofilm SBR (BSBR). The nitrification capability of three systems was inhibited by PCMX, but recovered after domestication, and PCMX made three systems realize partial nitrification for 10, 100 and 35 days, respectively. The extracellular polymeric substances of three systems increased first and then decreased with the increment of PCMX. The granular structure of AGSBR may be conducive to the enrichment of antibiotic resistance genes (ARGs), and almost all ARGs of BSBR were reduced during the addition of 5.0 mg/L PCMX. The microbial community results showed that Rhodococcus as potential degrading bacteria was continuously enriched in three systems. Piscinibacter was regarded as the potential antibiotic resistant bacteria, which was positively associated with multiple ARGs in three systems. Additionally, quaternary ammonium compounds resistance genes had a variety of positive correlations with bacteria in three systems. This study provided a new perspective for the usage and treatment of PCMX.

Efficacy of Disinfectants Usage at Daily Live Bird Markets in Four North-Western States of Nigeria

Maintaining strict biosecurity measures are essential in preventing disease spread from live bird markets (LBMs), which serve as a major intermingling area for poultry from different sources. This study evaluated the efficacy of disinfectants used in daily live bird markets of four north-western states in Nigeria. Seven different disinfectants were identified as commonly used in the LBMs. They were analysed by suspension and surface disinfection tests against standard strains of Escherichia coli, Salmonella Enteritidis, and Staphylococcus aureus. Isolates from swab samples of birds’ cages in the LBMs were initially subjected to biochemical tests and, subsequently, susceptibility tests against commercial disinfectants. All of the 7 (100 %) disinfectants used in the LBMs killed/inhibited the growth of E. coli, S. Enteritidis, and S. aureus with the suspension test, while following the surface disinfection test, all 7 (100 %) killed/inhibited the growth of E. coli and S. Enteritidis but only 4 (57 %) killed/inhibited the growth of S. aureus. Seven (0.02 %) samples out of the 400 swabs were positive for E. coli comprising 1 (14 %), 2 (29 %), and 4 (57 %) from LBMs in Katsina, Kaduna, and Kano, respectively. There were varying growths of E. coli at different concentrations and exposure times. Six (17 %) of the LBMs sampled had and used disinfectants. E. coli was isolated from 1 (17 %) out of the 6 LBMs that had and used disinfectants and 5 (17 %) out of the 29 LBMs that did not have or use disinfect-ants. The standard organisms were most susceptible to orthobenzyl chlorophenol-based disinfectants and least susceptible to chlorophenol-based disinfectants. This study has shown the importance of the use of disinfect-ants in LBMs. There should be enforcement of disinfectants usage in LBMs for public safety.

Development and In Vitro Validation of Antibacterial Paints Containing Chloroxylenol and Terpineol

The establishment of self-disinfecting surfaces is an important method to avoid surface contamination. Recently, paints with antimicrobial properties have been developed to be applied on different surfaces, avoiding contamination with pathogens. In this work, self-disinfecting paints containing Chloroxylenol (CLX), Terpineol (TRP), and a mixture of both substances were developed. The goal was to evaluate and validate these paints using international standards for eventual commercialization and application in scenarios where surface contamination represents a problem. The paints were challenged with five different bacteria, Gram-positive and Gram-negative, before and after a scrub resistance test, where the long-term efficacy of the paints was evaluated. The antibacterial activity assessment was performed following ISO 22196 and JIS Z2801. In general, the paints showed very promising results, demonstrating their antibacterial activity, before and after scrub resistance test. The paint incorporating the mixture of CLX and TRP (CLX+TRP) stood out by revealing consistent results of antibacterial activity both before and after the scrub resistance test for most of the tested bacteria. The cytotoxicity of the developed paints was assessed in vitro by performing tests by direct contact with a human skin cell line, HaCaT, and testes on extracts with HaCaT and a pulmonary cell line, A549. The methodologies for cytotoxicity assessment were developed based in ISO 10993. For genotoxicity assessment, alkaline comet assay was conducted on both cell lines. The cytotoxicity assessment revealed promising results with the paints, demonstrating values of cellular viability above 70% and values of lactate dehydrogenase (LDH) leakage below 30%. The genotoxic assessment also revealed acceptable values of primary DNA damage for the developed antibacterial paints. In general, the selected methodologies presented good potential to be applied in the validation of both efficacy and safety of the antimicrobial paints, aiming to be applied in real scenarios.

Triclosan targeting of gut microbiome ameliorates hepatic steatosis in high fat diet-fed mice

Antibiotic use provides a promising strategy for the treatment of non-alcoholic fatty liver disease (NAFLD) by regulating the gut microbiota composition. Triclosan, a widely used antibiotic, may improve gut microbiome dysbiosis associated with NAFLD through the suppression of pathogenic gram-negative bacteria. However, the effects of triclosan on gut microbiota and hepatic steatosis and have not been explored in NAFLD mouse model. In this study, C57BL/6J mice were fed with high fat diet (HFD) for continuous 20 weeks and treated with triclosan at 400 mg/kg/d for 8 weeks from week 13. We explored the effects of triclosan on hepatic lipid accumulation and gut microbiome in HFD-fed mice by histological examination and 16 S ribosomal RNA sequencing, respectively. Analysis on the composition of gut microbiota indicated that triclosan suppressed pathogenic gram-negative bacteria, including Helicobacter, Erysipelatoclostridium and Citrobacter, and increased the ratio of Bacteroidetes/Firmicutes in HFD-fed mice. Meanwhile, triclosan increased the relative abundance of beneficial gut microbiomes including Lactobacillus, Bifidobacterium and Lachnospiraceae, which protected against metabolic abnormality. The results of alpha-diversity and beta-diversity also showed the improvement of triclosan on bacterial diversity and richness in HFD-fed mice. Pathway analysis further confirmed that triclosan can regulate nutrient and energy metabolism through the elimination of deleterious bacteria. As a result, triclosan intervention significantly reduced lipid accumulation and alleviated hepatic steatosis in HFD-fed mice. In conclusion, our results suggest that triclosan can alleviate liver steatosis in HFD-fed mice by targeting the gut microbiome.

Chloroxylenol at environmental concentrations can promote conjugative transfer of antibiotic resistance genes by multiple mechanisms

The intergeneric conjugative transfer of antibiotic resistance genes (ARGs) is recognized as an important way to the dissemination of antibiotic resistance. However, it is unknown whether the extensive use of chloroxylenol (para-chloro-meta-xylenol, PCMX) in many pharmaceutical personal care products will lead to the spread of ARGs. In this study, the abilities and mechanisms of PCMX to accelerate the intergeneric conjugative transfer were investigated. Results showed that exposure of bacteria to environmental concentrations of PCMX (0.20-1.00 mg/L) can significantly stimulate the increase of conjugative transfer by 8.45-9.51 fold. The phenotypic experiments and genome-wide RNA sequencing revealed that 0.02-5.00 mg/L PCMX exposure could increase the content of alkaline phosphatase and malondialdehyde, which are characteristic products of cell wall and membrane damage. In addition, PCMX could lead to excessive production of reactive oxygen species (ROS) by 1.26-2.00 times, the superoxide dismutase and catalase produced by bacteria in response to oxidative stress were not enough to neutralize the damage of ROS, thus promoting the conjugative transfer. Gene Ontology enrichment analysis indicated that cell membrane permeability, pili, some chemical compounds transport and energy metabolism affected conjugative transfer. This study deepened the understanding of PCMX in promoting propagation of ARGs, and provided new perspectives for use and treatment of personal care products.

Antiviral and antibacterial activity of hand sanitizer and surface disinfectant formulations

Emergent diseases caused by viral and bacterial infections have proven to be a current and future challenge. The occurrence of these diseases is usually accompanied by the lack of vaccines and dedicated therapies leaving prevention as the best strategy to adopt. In that context, and apart from confinement and physical distancing measures, an increase in hygiene actions, namely hand and surface cleaning and disinfection can reduce the infection spread originated from our day-to-day routines. However, during crisis situations the high disinfectants demand can very likely lead to having them running out of stock. This impels many individuals and companies to produce their own disinfectants. Here, we explore the main components of a disinfection formulation, both for hand-rub and surface cleaning. Alcohol and non-alcohol based formulations are described, including the possibility to fine tune the properties of the final product in order to increase public acceptance while maintaining product efficacy. The action mechanisms of the main active principles are also described conjugating information from experimental and theoretical data. Overall, the main aspects to develop a disinfectant formulation are addressed, as well as their function, helping formulation developers to better understand the impact of their choices.

Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard "lock and key" paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

Human exposure and health risk assessment of an increasingly used antibacterial alternative in personal care products: Chloroxylenol

The ban of some antibacterial ingredients, such as triclosan (TCS) and triclocarban (TCC), in personal care products (PCPs) in some countries (but not in China) has resulted in the increasing use of antibacterial alternatives, such as chloroxylenol (PCMX). However, the underlying human health risks and environmental impacts of PCMX exposure are largely unknown. Thus, the distribution characteristics of PCMX in PCPs and susceptible populations and the major routes and health risks of human exposure to PCMX were investigated. The PCMX, TCS, and TCC concentrations in PCPs, urine, drinking water, and surface water were determined using high-performance liquid chromatograph system equipped with diode array detector or triple quadrupole mass spectrometer. Results showed that PCMX is widely used in antibacterial hand sanitizers and household disinfectants in China. The addition of PCMX as an antibacterial ingredient in PCPs showed an increasing trend. The geomean concentrations of urinary PCMX in children and pregnant women were 21.6 and 31.9 μg·L^-1, respectively, which were much higher than TCS and TCC. A considerable concentration of PCMX ranging from 1.62 to 9.57 μg·L^-1 was observed in the aquatic environment, suggesting a potential massive-use of PCMX by humans. Human PCMX exposure via drinking was negligible because the PCMX concentrations in drinking water were less than 2.00 ng·L^-1. During human simulation experiment, we found that dermal contact was the dominant route of human PCMX exposure, accounting for 92.1% of the urinary PCMX concentration. The estimated daily intake of PCMX in 9.68% of children and 5.66% of pregnant women was higher than the reference dose. However, the urinary 8-hydroxy-2'-deoxyguanosine concentrations remained stable despite the elevated PCMX concentrations, thereby suggesting that daily PCMX exposure may not cause oxidative DNA damage in humans. Nevertheless, the potential ecotoxicity and health risks induced by chronic PCMX exposure cannot be ignored because of its increasing use.

An investigation of the impact of triclosan adaptation on Proteus mirabilis clinical isolates from an Egyptian university hospital

Antibiotic resistance is a main threat to the public health. It is established that the overuse and misuse of antibiotics are highly contributing to antibiotic resistance. However, the impact of nonantibiotic antimicrobial agents like biocides on antibiotic resistance is currently investigated and studied. Triclosan (TCS) is a broad-spectrum antibacterial agent widely used as antiseptic and disinfectant. In this study, we aimed to evaluate the effect of exposure of Proteus mirabilis clinical isolates to sublethal concentrations of TCS on their antibiotic susceptibility, membrane characteristics, efflux activity, morphology, and lipid profile. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of TCS were determined for 31 P. mirabilis clinical isolates. The tested isolates were adapted to increasing sublethal concentrations of TCS. The MICs of 16 antibiotics were determined before and after adaptation. Membrane characteristics, efflux activity, ultrastructure, and lipid profile of the tested isolates were examined before and after adaptation. Most adapted P. mirabilis isolates showed increased antibiotic resistance, lower membrane integrity, lower outer and inner membrane permeability, and higher membrane depolarization. Nonsignificant change in membrane potential and lipid profile was found in adapted cells. Various morphological changes and enhanced efflux activity was noticed after adaptation. The findings of the current study suggest that the extensive usage of TCS at sublethal concentrations could contribute to the emergence of antibiotic resistance in P. mirabilis clinical isolates. TCS could induce changes in the bacterial membrane properties and increase the efflux activity and in turn decrease its susceptibility to antibiotics which would represent a public health risk.

Preliminary Study on Disinfectant Susceptibility/Resistance Profiles of Bacteria Isolated from Slaughtered Village Free-Range Chickens in Nairobi, Kenya

Disinfectants are regularly used for cleansing poultry slaughterhouses to control microorganisms. However, the microorganisms such as bacteria are developing resistance to disinfectant(s) and complicate control of bacterial infections. The aim of this study was, therefore, to determine disinfectant susceptibility/resistance patterns manifested by bacteria (to commonly used disinfectants), which were isolated from intestines of slaughtered indigenous chickens in Nairobi, Kenya. The method used was agar well diffusion, and the six disinfectants (their active ingredients are in brackets) tested were as follows: Kupacide^® (glutaraldehyde; benzalkonium chloride); TH4+^® (didecyl dimethyl ammonium HCl; dioctyl dimethyl ammonium HCl; octyl decyldimethyl ammonium HCl; alkyl dimethyl ammonium HCl; and glutaraldehyde); Noro cleanse^® (glutaraldehyde; coco-benzyl-dimethyl-ammonium chloride); Dettol^® (chloroxylenol); Savlon^® (chlorhexidine gluconate; cetrimide; and N-propylalcohol); and Jik^® (sodium hypochlorite). At recommended user concentration by the manufacturer, isolates showed various resistance to the respective disinfectants. E. coli isolates were resistant to five of the tested disinfectants (Jik^®, TH4+^®, Noro cleanse^®, Dettol^®, and Kupacide^®); however, they were susceptible to Savlon^®; Staphylococcus isolates were resistant to disinfectants to Jik^® and TH4+^® and susceptible to the rest disinfectants; Streptococcus isolates were only resistant to Jik^® and susceptible to the remaining disinfectants. Some E. coli and Staphylococcus isolates showed resistance to more than one disinfectant. This study has demonstrated resistance of the bacterial isolates to various disinfectants at recommended user concentrations, although some of them were susceptible at higher concentration(s) and lower concentrations. This will interfere with the cleansing of the respective premises, resulting in contaminated products, which may end-up causing disease in the humans consuming them. Hence, it is recommended that one ascertains the efficacy of respective disinfectant by carrying out disinfectant susceptibility testing to know the effective ones and the appropriate concentration to use.

Characterization of binding interaction of triclosan and trypsin

Triclosan (TCS), a broad-spectrum antibacterial agent, exhibits a high exposure in the environment. However, the residual TCS in the environment poses a potential risk to human health. In this study, spectroscopic methods, molecular docking and animal experiment were conducted to completely understand the interaction between trypsin and TCS. The formation of the TCS-trypsin complex was spontaneously achieved through hydrogen bonds and Van der Waals forces with a binding constant (K_a) between 10³ and 10⁴ L mol^-1. In addition, the trypsin activity in fish intestine was inhibited by TCS exposure, revealing the potentially negative effects of TCS on metabolism. The results might be explained by changes in the conformation of the trypsin, inducing the content of unordered coil increasing significantly (from 36.2% to over 80%). This work provides useful information for assessing the toxicity of TCS at the molecular level.