Directional Supramolecular Assembly of π-Amphiphiles with Tunable Surface Functionality and Impact on the Antimicrobial Activity

Alkanols Regulate the Fluidity of Phospholipid Bilayer in Accordance to Their Concentration and Polarity

In spite of the widespread use of alkanols as penetration enhancers, their effect on vesicular formulations remains largely unexplored. These can affect the stability and integrity of the phospholipid bilayers. In this study, we have investigated the interaction of linear (ethanol, butanol, hexanol, octanol) and branched alkanols (t-amylol and t-butanol) with three phospholipids (soya lecithin, SL; soy L-α-phosphatidylcholine, SPC; and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC). Thermodynamic and structural aspects of these interactions were studied as a function of the alkanol concentration and chain length. Our interpretations are based on isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) experiments. We observed one-site interactions wherein hydroxyl and acyl groups interacted with the polar and nonpolar regions of the phospholipid, respectively. The stability and structural integrity of bilayers appeared to be dependent upon (a) the hydrocarbon chain length and concentration of alcohols, and (b) the degree of unsaturation in the phospholipid molecule. We found that these interactions triggered a reduction in the enthalpy which was compensated by increased entropy, keeping free energy negative. Drop in enthalpy indicates reversible disordering of the bilayer which enables the diffusion of alcohol without triggering destabilization. Ethanol engaged predominantly with the interface, and it resulted in higher enthalpic changes. Interactions became increasingly unfavorable with longer alcohols - a cutoff point was recorded with hexanol. The overall sequence of membrane disordering capability was recorded as follows: ethanol < butanol < octanol < hexanol. Octanol's larger size restricted its penetration in the bilayer, and hence it caused less enthalpic changes relative to hexanol. This could also be verified from the trends in the area ratio of these vesicles obtained from the DLS data. Branched alkanols displayed a lower binding affinity with the phospholipids relative to their linear counterparts. These data are useful while contemplating the inclusion of short-chain alcohols as penetration enhancers in phospholipid vesicles.

Hydrogen-Bonding-Regulated Morphology Control and the Impact on the Antibacterial Activity of Cationic π-Amphiphiles

This manuscript describes the synthesis, self-assembly, and antibacterial properties of naphthalene-diimide (NDI)-derived cationic π-amphiphiles. Three such asymmetric NDI derivatives with a nonionic hydrophilic wedge and a guanidine group in the two opposite sides of the NDI chromophore were considered. They differ by a single functional group (hydrazide, amide, and ester for NDI-1, NDI-2, and NDI-3, respectively), located in the linker between the NDI and the hydrophilic wedge. For NDI-1, the H-bonding among the hydrazides regulated unilateral stacking and a preferential direction of curvature of the resulting supramolecular polymer, producing an unsymmetric polymersome with the guanidinium groups displayed at the outer surface. NDI-3, lacking any H-bonding group, exhibits π-stacking without any preferential orientation and generates spherical particles with a relatively poor display of the guanidium groups. In sharp contrast to NDI-1, NDI-2 exhibits an entangled one-dimensional (1D) fibrillar morphology, indicating the prominent role of the H-bonding motif of the amide group and flexibility of the linker. The antibacterial activity of these assemblies was probed against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). NDI-1 showed the most promising antibacterial activity with a minimum inhibitory concentration (MIC) of ∼7.8 μg/mL against S. aureus and moderate activity (MIC ∼ 125 μg/mL) against E. coli. In sharp contrast, NDI-3 did not show any significant activity against the bacteria, suggesting a strong impact of the H-bonding-regulated directional assembly. NDI-2, forming a fibrillar network, showed moderate activity against S. aureus and negligible activity against E. coli, highlighting a significant impact of the morphology. All of these three molecules were found to be compatible with mammalian cells from the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) and hemolysis assay. The mechanistic investigation by membrane polarization assay, live/dead fluorescence assay, and microscopy studies confirmed the membrane disruption mechanism of cell killing for the lead candidate NDI-1.

Metal Ion Responsive Luminescent Bio-Templated Co-Assemblies: Label-Free Detection of Multi-Metal Ions in Aqueous Media

Recently, anionic bio-templates have emerged as promising platforms for designing dynamic and stimuli-responsive chromophoric assemblies capable of light harvesting in aqueous media thereby mimicking natural photosynthesis. Here, we present multi-metal ion-responsive luminescent co-assemblies between cationic pyrene-imidazolium amphiphile and anionic bio-templates (ATP, heparin, and DNA) in aqueous media. The anionic bio-templates enhance Förster resonance energy transfer (FRET) in the co-assemblies, with pyrene serving as an excellent donor for generating tunable multi-luminescent materials with embedded acceptor dyes. However, a significant loss in energy transfer towards acceptor dyes was observed in the presence of various metal ions, attributed to excimeric emission quenching facilitated by electron transfer between the pyrene chromophore and metal ions. Interestingly, detailed studies revealed that only ATP-based co-assemblies exhibited quenching phenomena in the presence of metal ions, contrasting with heparin and ctDNA co-assemblies. Additionally, label-free detection of multi-metal ions in aqueous environments, such as Fe2+, Fe3+, and Cu2+ ions, was successfully achieved with lower detection limits of 0.01 μM (3 ppb), 0.12 μM (30 ppb), and 0.58 μM (150 ppb) respectively. These co-assemblies hold significant promise for practical applications in environmental and biomedical sensing, enabling sensitive monitoring of metal ion concentrations.

Elucidating the role of multivalency, shape, size and functional group density on antibacterial activity of diversified supramolecular nanostructures enabled by templated assembly

With the increased prevalence of antibiotic-resistant infections, there is an urgent need to develop novel antibacterial materials. In addition, gaining a complete understanding of the structural features that impart activity toward target microorganisms is essential to enable materials optimisation. Here we have reported a rational design to fabricate antibacterial supramolecular nanoparticles with variable shape, size and cationic group density, by exploiting noncovalent interactions between a shape determining template amphiphile and a cationic amphiphile to introduce charge on the nanoparticle surface. We have shown that the monomeric cationic amphiphile alone showed poor antibacterial activity, whereas nanostructures formed by co-assembling the complementary units showed significantly enhanced antibacterial efficiency. Further, the systematic variation of several structural parameters such as shape, spacing between the cationic groups and size of these nanostructures allowed us to elicit the role of each parameter on the overall antibacterial properties. Finally, we investigated the origin of the differing antibacterial activity of these nanoparticles having different shape and size but with the same molecular composition, by comparing the thermodynamic parameters of their binding interactions with a bacterial membrane mimic.

Advancements in antimicrobial nanoscale materials and self-assembling systems

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

Model architectures for bacterial membranes

The complex composition of bacterial membranes has a significant impact on the understanding of pathogen function and their development towards antibiotic resistance. In addition to the inherent complexity and biosafety risks of studying biological pathogen membranes, the continual rise of antibiotic resistance and its significant economical and clinical consequences has motivated the development of numerous in vitro model membrane systems with tuneable compositions, geometries, and sizes. Approaches discussed in this review include liposomes, solid-supported bilayers, and computational simulations which have been used to explore various processes including drug-membrane interactions, lipid-protein interactions, host–pathogen interactions, and structure-induced bacterial pathogenesis. The advantages, limitations, and applicable analytical tools of all architectures are summarised with a perspective for future research efforts in architectural improvement and elucidation of resistance development strategies and membrane-targeting antibiotic mechanisms.

Naphthalene diimides: perspectives and promise

In this review, we describe the developments in the field of naphthalene diimides (NDIs) from 2016 to the presentday. NDIs are shown to be an increasingly interesting class of molecules due to their electronic properties, large electron deficient aromatic cores and tendency to self-assemble into functional structures. Almost all NDIs possess high electron affinity, good charge carrier mobility, and excellent thermal and oxidative stability, making them promising candidates for applications in organic electronics, photovoltaic devices, and flexible displays. NDIs have also been extensively studied due to their potential real-world uses across a wide variety of applications including supramolecular chemistry, sensing, host-guest complexes for molecular switching devices, such as catenanes and rotaxanes, ion-channels, catalysis, and medicine and as non-fullerene accepters in solar cells. In recent years, NDI research with respect to supramolecular assemblies and mechanoluminescent properties has also gained considerable traction. Thus, this review will assist a wide range of readers and researchers including chemists, physicists, biologists, medicinal chemists and materials scientists in understanding the scope for development and applicability of NDI dyes in their respective fields through a discussion of the main properties of NDI derivatives and of the status of emerging applications.

Molecular Recognition Driven Bioinspired Directional Supramolecular Assembly of Amphiphilic (Macro)molecules and Proteins

Bioinspired self-assembly has been explored with diverse synthetic scaffolds, among which amphiphiles are perhaps the most extensively studied systems. Classical surfactants or amphiphilic block copolymers, depending on the hydrophobic-hydrophilic balance, produce distinct nanostructures, which hold promise for applications ranging from biology to materials sciences. Nevertheless, their immiscibility-driven aggregation does not provide the opportunity to precisely regulate the internal order, morphology, or functional group display, which is highly desirable, especially in the context of biological applications.A new class of amphiphiles have emerged in the recent past in which the hydrophilic segment(s) is appended with a hydrophobic supramolecular-structure-directing-unit (SSDU), consisting of a π-conjugated chromophore and a H-bonding group. Self-recognition of the SSDU by attractive directional interactions governs the supramolecular assembly, which is fundamentally different than the repulsive solvent-immiscibility driven aggregation of traditional amphiphiles. Such SSDU-appended hydrophilic polymers exhibit entropy-driven highly stable self-assembly producing distinct nanostructures depending on the H-bonding functional group. For example, polymers with the hydrazide-functionalized SSDU attached form a polymersome, while in a sharp contrast, the same polymers when connected to an amide containing SSDU produce a cylindrical micelle via a spherical-micelle intermediate. This relationship holds true for a series of SSDU-attached hydrophilic polymers irrespective of the hydrophobic/hydrophilic balance or chemical structure, indicating that the supramolecular-assembly is primarily controlled by the specific molecular-recognition motif of the SSDU, instead of the packing parameter-based norms. Beyond synthetic polymers, SSDU-attached proteins also exhibit similar molecular-recognition driven self-assembly as well as coassembly with SSDU-attached polymers or hydrophilic wedges, producing multi-stimuli-responsive nanostructures in which the protein gains remarkable protection from thermal denaturation or enzymatic hydrolysis and exhibits redox-responsive enzymatic activity.Furthermore, SSDU-derived bola-shape π-amphiphiles have been recognized as a useful scaffold for the synthesis of unsymmetric polymersomes, rarely reported in the literature. The building block consists of a hydrophobic naphthalene-diimide (NDI) π-system attached to a hydrophilic functional group (ionic or nonionic) and a nonionic wedge on its two opposite arms. Extended H-bonding among the hydrazide groups, placed only on one side of the central chromophore by design, ensures stacking of the NDIs with parallel orientation and induces a preferred direction of curvature so that the H-bonded chain and consequently the functional groups attached to the same side remain at the inner-wall of the supramolecular polymersome. Automatically, the functional groups, located on the other side, are displayed at the outer surface. This design works for different amphiphiles, which by virtue of efficient and predictable functional group display, strongly influences the multivalent binding with different biological targets resulting in efficient enzyme inhibition, glycocluster effect, or antibacterial activity, depending on the nature of the functional group. By taking advantage of the electron accepting nature of the NDI, electron rich pyrene-containing amphiphiles can be costacked in alternating sequence, producing temperature and redox-responsive supramolecular polymers with NDI/pyrene stoichiometry-dependent morphology, lower critical solution temperature (LCST), functional group display, and antibacterial activity.

Characteristics of the pH-regulated aggregation-induced enhanced emission (AIEE) and nanostructure orchestrate via self-assembly of naphthalenediimide–tartaric acid bola-amphiphile: role in cellular uptake

A naphthalene diimide–tartaric acid conjugate was successfully synthesized, and the influence of tartaric acid on the self-assembly of the NDI–TA scaffold was explored.

Exploring the tubular self-assembly landscape of dinucleobase amphiphiles in water

The tubular aqueous assembly of dinucleobase amphiphilic monomers endowed with anionic, neutral or cationic groups is investigated under diverse conditions.

Selectivity and bio-compatibility of self-assembled chiral flower-like and helical nanostructures

The molecular building block NDI–LCA was synthesized via substitution of NDA at the di-imide position with two lithiocholic acid moieties, resulted into chiral flower line and helical nanostructures.

Tunable nanostructures by directional assembly of donor–acceptor supramolecular copolymers and antibacterial activity

This manuscript reports supramolecular copolymerization of amphiphilic donor (D) and acceptor (A) units and their antibacterial activity.