Polyelectrolyte Microgels at a Liquid–Liquid Interface: Swelling and Long-Range Ordering

Peculiarities of Emulsions Stabilized by Stimuli-Responsive Interpenetrating Polymeric Network Microgels

Emulsions have become a crucial product form in various industries in modern times. Expanding the class of substances used to stabilize emulsions can improve their stability or introduce new properties. Particularly, the use of stimuli-responsive microgels makes it possible to create "smart" emulsions whose stability can be controlled by changing any of the specified stimuli. Thus, finding new ways to stabilize emulsions may broaden their application. In this work, for the first time, we applied microgels based on interpenetrating polymeric networks (IPNs) of poly(N-isopropylacrylamide) (PNIPAM) and poly(acrylic acid) (PAA) as stabilizing agents for "oil-in-water" emulsions. We have demonstrated that emulsions stabilized by such soft particles can remain colloidally stable for an extended period, even after being heated up to 40 °C, which is above the lower critical solution temperature (LCST) of PNIPAM. On the contrary, the emulsions stabilized by PNIPAM homopolymer microgels were broken upon heating. To understand the stabilization mechanism of the emulsions, mesoscopic computer simulations were performed to study the IPN microgels at the liquid-liquid interface. The simulations demonstrated that when the first subnetwork (PNIPAM) collapses, the particle adopts a flattened core-shell morphology with a highly swollen PAA-rich shell and a collapsed PNIPAM-rich core. Unlike its PNIPAM homopolymer counterpart, the IPN microgel maintains its three-dimensional shape, which provides stability to the microgel-based emulsions over a wide range of temperatures. Our combined findings could be useful in developing new approaches to emulsions' storage, biphasic catalysis, and lubrication of mechanisms in various operating and climatic conditions.

Microfluidic Fabrication and Applications of Microgels and Hybrid Microgels

Smart microgels have gained much attention because of their wide range of applications in the field of biomedical, environmental, nanotechnological and catalysis sciences. Most of the applications of microgels are strongly affected by their morphology, size and size distribution. Various methodologies have been adopted to obtain polymer microgel particles. Droplet microfluidic techniques have been widely reported for the fabrication of highly monodisperse microgel particles to be used for various applications. Monodisperse microgel particles of required size and morphology can be achieved via droplet microfluidic techniques by simple polymerization of monomers in the presence of suitable crosslinker or by gelation of high molecular weight polymers. This report gives recent research progress in fabrication, characterization, properties and applications of microgel particles synthesized by microfluidic methods.

Emulsions stabilised with pectin-based microgels: investigations into the effect of pH and ionic strength on emulsion stability

Pectin-based microgel particles (MGPs) are encouraging sustainable emulsifying agents for food-applications. Based on polyelectrolytes, pectin-based MGPs are assumed to be pH and ionic strength sensitive, in a similar manner to MGPs of synthetic polymers. Besides building a barrier around oil droplets, charged MGPs repulse each other. Thus the stabilisation mechanisms of pectin-based MGPs should be both steric and electrostatic. To investigate this, emulsions were homogenised with MGP concentrations ranging from 0.5 to 2 wt% MGPs. After emulsification, the pH of the emulsions was adjusted to 4, 3, or 2; and the resulting droplet sizes were measured. We found out that the droplet size and the appearance of agglomerates increased with decreasing pH values. This was caused by the loss of the MGP surface charge, as stated by their ζ-potential, showing an increase from -33.71 ± 4.1 mV for samples with pH 4 to -17 ± 0.6 mV, and -3.4 ± 0.6 mV for pH 3 and 2, respectively. However, the degree of coalescence was dependent on the MGP concentration, as samples with 0.5 wt% coalesced more readily than samples with 2 wt% MGP. These results help understand the emulsion stabilisation mechanisms of pectin-based MGPs and what effect formulation parameters have on the long-term stability of MGP-stabilised emulsions.

Microgels at interfaces, from mickering emulsions to flat interfaces and back

In this review, we cover the topic of p(NIPAM) based microgels at interfaces, revisiting classical studies in light of the newest ones. In particular, we focus on their use as emulsifiers in the so-called mickering emulsions, i.e. Pickering emulsion stabilized by soft particles. Given the complexity of the experimental characterization and simulation of these soft particles at interfaces, the review is structured in progressive complexity levels, until we reach the highly interesting and promising responsiveness to stimuli of mickering emulsions. We start from the lowest level of complexity, the current understanding of the behavior of single microgels confined at a flat interface. Then, we discuss their collective behavior upon crowding, their responsiveness at interfaces, and their macroscopic properties as microgel films. Once we have the necessary characterization tools, we proceed to discuss the complex and convoluted picture of responsive mickering emulsions. The way is rough, with current controversial and contradicting studies, but it holds promising results as well. We state open questions worth of being tackled by the Soft Matter community, and we conclude that it is worth the trouble of continuing after the master theory of microgel interfacial activity, as it will pave the way to widely adopt responsive mickering emulsions as the worthy Pickering emulsion successors.

Microgels self-assembly at liquid/liquid interface as stabilizers of emulsion: Past, present & future

The most recent developments on Pickering emulsions deal with the design of responsive emulsions able to undergo fast destabilization under the effect of an external stimulus. In this scenario, soft colloidal particles like microgels are considered novel class suitable emulsifiers. Microgels particles self-assemblies are highly deformable at interfaces covering higher surfaces than hard particles and their interfacial behavior strongly depends on external-stimuli. Microgels are very diverse owing to the large variety of them from the point of view of possible combinations of stimuli-responsiveness and different microstructures (crosslinking density and distribution). Herein, we illustrate the use of different types of responsive microgels not only from a structural point of view but also even from physical one. For that, the effect of different microgels parameters such as internal structure and charge density on mechanical properties of the interface will be discussed.

Influence of Charges on the Behavior of Polyelectrolyte Microgels Confined to Oil-Water Interfaces

The role of electrostatics on the interfacial properties of polyelectrolyte microgels has been discussed controversially in the literature. It is not yet clear if, or how, Coulomb interactions affect their behavior under interfacial confinement. In this work, we combine compression isotherms, atomic force microscopy imaging, and computer simulations to further investigate the behavior of pH-responsive microgels at oil-water interfaces. At low compression, charged microgels can be compressed more than uncharged microgels. The in-plane effective area of charged microgels is found to be smaller in comparison to uncharged ones. Thus, the compressibility is governed by in-plane interactions of the microgels with the interface. At high compression, however, charged microgels are less compressible than uncharged microgels. Microgel fractions located in the aqueous phase interact earlier for charged than for uncharged microgels because of their different swelling perpendicular to the interface. Therefore, the compressibility at high compression is controlled by out-of-plane interactions. In addition, the size of the investigated microgels plays a pivotal role. The charge-dependent difference in compressibility at low compression is only observed for small but not for large microgels, while the behavior at high compression does not depend on the size. Our results highlight the complex nature of soft polymer microgels as compared to rigid colloidal particles. We clearly demonstrate that electrostatic interactions affect the interfacial properties of polyelectrolyte microgels.

Scavenging One of the Liquids versus Emulsion Stabilization by Microgels in a Mixture of Two Immiscible Liquids

It is known that microgels can serve as soft, permeable and stimuli-responsive alternative of solid colloidal particles to stabilize oil-water emulsions. The driving force for the adsorption of the microgels on interface of two immiscible liquids is a shielding of unfavorable oil-water contacts by adsorbed subchains, that is, the decrease of the surface tension between the liquids. Such phenomenon usually proceeds if volume fractions of the two liquids are comparable with each other and the microgel concentration is not high enough. The natural question arises: what is going on with the system in the opposite case of strongly asymmetric mixture (one of the liquids (oil) has a very small fraction) or high microgel concentration (the overall volume of the microgels exceeds the volume of the minor oil component)? Here we demonstrate that the microgels uptake the oil whose concentration within the microgels can be orders of magnitude higher than outside, leading to the additional microgel swelling (in comparison with the swelling in water). Thus, the microgels can serve as scavengers and concentrators of liquids dissolved in water. At first glance, this effect seems counterintuitive. However, it has a clear physical reason related to the incompatibility of oil and water. Absorption of the oil by microgels reduces unfavorable oil-water contacts by microgel segments: the microgels have a higher concentration of the segments at the periphery, forming a shell. The microgels with uptaken oil are stable toward aggregation at very small oil concentration in the mixture. However, an increase in the oil concentration can lead to aggregation of the microgels into dimers, trimers, and so on. The increasing concentration of oil mediates the attraction between the microgels: the oil in the aggregates appears to be localized in-between the microgels instead of their interior, which is accompanied by the release of the elastic stress of the microgels. A further increase in the oil concentration results in a growth of the size of the oil droplets between the microgels and the number of the microgels at the droplet's periphery, that is, the emulsion is formed.

Poly-N-isopropylacrylamide Nanogels and Microgels at Fluid Interfaces

The confinement of colloidal particles at liquid interfaces offers many opportunities for materials design. Adsorption is driven by a reduction of the total free energy as the contact area between the two liquids is partially replaced by the particle. From an application point of view, particle-stabilized interfaces form emulsions and foams with superior stability. Liquid interfaces also effectively confine colloidal particles in two dimensions and therefore provide ideal model systems to fundamentally study particle interactions, dynamics, and self-assembly. With progress in the synthesis of nanomaterials, more and more complex and functional particles are available for such studies. In this Account, we focus on poly(N-isopropylacrylamide) nanogels and microgels. These are cross-linked polymeric particles that swell and soften by uptaking large amounts of water. The incorporated water can be partially expelled, causing a volume phase transition into a collapsed state when the temperature is increased above approximately 32 °C. Soft microgels adsorbed to liquid interfaces significantly deform under the influence of interfacial tension and assume cross sections exceeding their bulk dimensions. In particular, a pronounced corona forms around the microgel core, consisting of dangling chains at the microgel periphery. These polymer chains expand at the interface and strongly affect the interparticle interactions. The particle deformability therefore leads to a significantly more complex interfacial phase behavior that provides a rich playground to explore structure formation processes. We first discuss the characteristic "fried-egg" or core-corona morphology of individual microgels adsorbed to a liquid interface and comment on the dependence of this interfacial morphology on their physicochemical properties. We introduce different theoretical models to describe their interfacial morphology. In a second part, we introduce how ensembles of microgels interact and self-assemble at liquid interfaces. The core-corona morphology and the possibility to force these elements into overlap upon compression results in a complex phase behavior with a phase transition between microgels with extended and collapsed coronae. We discuss the influence of the internal particle architecture, also including core-shell microgels with rigid cores, on the phase behavior. Finally, we present new routes for the realization of more complex structures, resulting from multiple deposition protocols and from engineering the interaction potential of the individual particles.