Influence of Al on the Structure and in Vitro Behavior of Hydroxyapatite Nanopowders

Peculiarities of charge compensation in lithium-doped hydroxyapatite

Hydroxyapatite (HA) remains one of the most popular materials for various biomedical applications and its fields of application have been expanding. Lithium (Li+) is a promising candidate for modifying the biological behavior of HA. Li+ is present in trace amounts in the human body as an alkaline and bioelectric material. At the same time, the introduction of Li+ into the HA structure required charge balance compensation due to the difference in oxidation degree, and the scheme of this compensation is still an open question. In the present work, the results of the theoretical and experimental study of the Li+-doped HA synthesis are presented. According to X-ray diffraction data, Fourier transform infrared spectroscopy as well as the combination of electron paramagnetic resonance methods, the introduction of Li+ in the amount up to 0.05 mol% resulted in the preservation of the HA structure. Density functional theory calculations show that Li+ preferentially incorporates into the Ca (1) position with a small geometry perturbation. The less probable positioning in the Ca (2) position leads to a drastic perturbation of the anion channel.

Enhancement of antimicrobial properties by metals doping in nano-crystalline hydroxyapatite for efficient biomedical applications

In this study, we have introduced a method for the synthesis of various metal-doped nano-crystalline hydroxyapatites (HAp) using a standard wet chemical precipitation technique. Both divalent (Ni and Zn) and trivalent (Al and Fe) metals were selected for the doping process. Additional research work was also conducted to assess the antimicrobial efficacy of these doped-HAps against a range of gram-positive and gram-negative microorganisms. All the synthesized metal-doped hydroxyapatite (HAp) exhibited notable antibacterial characteristics against gram-negative bacterial strains, namely Escherichia coli (E. coli) and Salmonella typhi (S. typhi), outperforming the pure HAp. The inhibition zone observed for the metal-doped HAp ranged from 14 to 16 mm. The Fe ion displayed a notable inhibitory zone measuring 16 mm, proving to be the most expansive among all tested ions against both E. coli and S. typhi bacterial strains. The Zn-HAp exhibited a comparable inhibitory zone size of 14 mm against both S. typhi and E. coli. Additional characterization methods, such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and Scanning electron microscopy (SEM), were used to validate the structural properties of the synthesized metal-doped hydroxyapatite (HAp) samples. The biocompatibility assessment of metal-doped hydroxyapatite (HAp) samples was carried out by haemolysis tests, which revealed that all synthesized hydroxyapatite (HAp) samples have the potential to serve as reliable biomaterials.

The Mutual Incorporation of Mg2+ and CO32- into Hydroxyapatite: A DFT Study

Hydroxyapatite (HA) with a stoichiometry composition of Ca₁₀(PO₄)₆(OH)₂ is widely applied for various biomedical issues, first of all for bone defect substitution, as a catalyst, and as an adsorbent for soil and water purification. The incorporation of foreign ions changes the acid-base relation, microstructure, porosity, and other properties of the HA materials. Here, we report the results of calculations of the density functional theory and analyze the possibility of two foreign ions, CO₃^2- and Mg²⁺, to be co-localized in the HA structure. The Na⁺ was taken into account for charge balance preservation. The analysis revealed the favorable incorporation of CO₃^2- and Mg²⁺ as a complex when they interact with each other. The energy gain over the sole ion incorporation was pronounced when CO₃^2- occupied the A position and Mg²⁺ was in the Ca(2) position and amounted to -0.31 eV. In the most energy-favorable complex, the distance between Mg²⁺ and the O atom of carbonate ion decreased compared to Mg…O distances to the surrounding phosphate or hydroxide ions, and amounted to 1.98 Å. The theoretical calculations agree well with the experimental data reported earlier. Understating the structure-properties relationship in HA materials varying in terms of composition, stoichiometry, and morphology paves the way to rational designs of efficient bio-based catalytic systems.

Analysis of the Osseointegration Process of Dental Implants by Electron Paramagnetic Resonance: An In Vivo Study

This research work presents an analysis of the process of an implant’s osseointegration to the jawbone tissue. The purpose of this work was to describe the processes of assimilation and the biochemical dynamics which occur during dental implantation using implants with different macro-microstructure surfaces at the level of stable free radicals using the electron paramagnetic resonance (EPR) method. The experimental investigation was conducted on seven Vietnamese minipigs over twelve months old and weighing up to 30 kg using implants with various macro-microstructure surfaces (SLA, RBM, and HST^TM) and implantation systems, namely the Adin, Sunran, Biomed, and Osstem systems. The integration of the implant into the bone triggered biochemical processes with the formation of stable free radicals. The EPR method was used to identify the formed paramagnetic species and to study the dynamics of the interaction between the surface of the implant and the bone after one and two months. The concentration of carbonate surface centers increased with the time that the implant was connected to the hard tissue. The “Sunran” and “HST^TM” were established as the most suitable implantation system and surface type, respectively, thanks to the highest rate of osseointegration (assimilation) with the bone (hard) tissue. Thus, the EPR method provides the opportunity to study implantation processes.

Three-dimensional structures, dynamics and calcium-mediated interactions of the exopolysaccharide, Infernan, produced by the deep-sea hydrothermal bacterium Alteromonas infernus

The exopolysaccharide Infernan, from the bacterial strain GY785, has a complex repeating unit of nine monosaccharides established on a double-layer of sidechains. A cluster of uronic and sulfated monosaccharides confers to Infernan functional and biological activities. We characterized the 3-dimensional structures and dynamics along Molecular Dynamics trajectories and clustered the conformations in extended two-fold and five-fold helical structures. The electrostatic potential distribution over all the structures revealed negatively charged cavities explored for Ca²⁺ binding through quantum chemistry computation. The transposition of the model of Ca²⁺complexation indicates that the five-fold helices are the most favourable for interactions. The ribbon-like shape of two-fold helices brings neighbouring chains in proximity without steric clashes. The cavity chelating the Ca²⁺ of one chain is completed throughout the interaction of a sulfate group from the neighbouring chain. The resulting is a 'junction zone' based on unique chain-chain interactions governed by a heterotypic binding mode.

Simple Approach to Medical Grade Alumina and Zirconia Ceramics Surface Alteration via Acid Etching Treatment

In order for bioceramics to be further used in composites and their applications, it is important to change the surface so that the inert material is ready to interact with another material. Medical grade alumina and zirconia ceramic powders have been chemically etched with three selected acidic mixtures. Powder samples were taken for characterization, which was the key to evaluating a successful surface change. Changes in morphology, together with chemical composition, were studied using scanning electron microscopy, phase composition using X-ray diffraction methods, and nitrogen adsorption/desorption isotherms are used to evaluate specific surface area and porosity. The application of HF negatively affected the morphology of the material and caused agglomeration. The most effective modification of ceramic powders was the application of a piranha solution to obtain a new surface and a satisfactory degree of agglomeration. The prepared micro-roughness of the etched ceramic would provide an improved surface of the material either for its next step of incorporation into the selected matrix or to directly aid in the attachment and proliferation of osteoblast cells.

Study of Electron-Nuclear Interactions in Doped Calcium Phosphates by Various Pulsed EPR Spectroscopy Techniques

Substituted calcium phosphates (CaPs) are vital materials for the treatment of bone diseases and repairing and replacement of defects in human hard tissues. In this paper, we present some applications of the rarely used pulsed electron paramagnetic resonance (EPR) and hyperfine interaction spectroscopy approaches [namely, electron spin-echo envelope modulation (ESEEM) and electron-electron double-resonance detected nuclear magnetic resonance (EDNMR)] to investigate synthetic CaPs (hydroxyapatite, tricalcium, and octacalcium phosphate) doped with various cations (Li+, Na+, Mn2+, Cu2+, Fe3+, and Ba2+). These resonance techniques provide reliable tools to obtain unique information about the presence and localization of impurity centers and values of hyperfine and quadrupole tensors. We show that revealed in CaPs by EPR techniques, radiation-induced stable nitrogen-containing species and carbonate radicals can serve as sensitive paramagnetic probes to follow CaPs' structural changes caused by cation doping. The most pulsed EPR, ESEEM, and EDNMR spectra can be detected at room temperature, reducing the costs of the measurements and facilitating the usage of pulsed EPR techniques for CaP characterization.

Defect Induced Charge Redistribution and Enhanced Adsorption of Lysozyme on Hydroxyapatite for Efficient Antibacterial Activity

Defects in hydroxyapatite (HA) have attracted increasing research interest due to their significant functions to increase the bioactivity and antibacterial ability of hard-tissue implants. However, little is known about the natural property and functional mechanism of the defects in HA. Herein, we reported on the defect property concerned with the coordination state and charge distribution in Al doped HA, as well as the consequent interface and protein capture ability for improved antibacterial activity. Systemic investigations suggested that Al replacing Ca in HA induced coordination defect with decreased coordination number and bond distance, caused charge transfer and redistribution of surrounding O atom and resulted in an increase in negative charge of coordinated O atoms. These O atoms coordinated with Al further served as docking sites for lysozyme molecules via electrostatic and H-bonding interaction. The capacity of lysozyme adsorption for Al-HA increased approximately 10-fold more than that of HA, which significantly increased the antibacterial activity through lysozyme-catalyzed splitting of cell wall of bacteria. Moreover, in vitro studies indicated that Al-HA materials showed good cytocompatibility. These findings not only provided new insights into the important effect of defects on the performances of HA biomaterials by modulation of the coordination state, charge distribution, and chemical activity, but also proposed a promising method for efficient antibacterial activity of HA biomaterials.

Using DFT to Calculate the Parameters of the Crystal Field in Mn2+ Doped Hydroxyapatite Crystals

Crystal field parameters for two nonequivalent positions Ca (I) and Ca (II) for hydroxyapatite (HAp) crystals from the density functional theory (DFT) are calculated. Calculations are compared with the experimental electron paramagnetic resonance (EPR) spectra (registered at two microwave frequencies) for the synthesized Mn-HAp powders Ca9.995Mn0.005(PO4)6(OH)2. It is found that in the investigated species, the manganese is redistributed between both calcium sites with prevalence in Ca (I). Agreement between the calculated and experimental data proves that crystal field parameters in HAp can be calculated in the classical DFT model using the distributed electron density.

Radiation-Induced Stable Radicals in Calcium Phosphates: Results of Multifrequency EPR, EDNMR, ESEEM, and ENDOR Studies

This article presents the results of a study of radiation-induced defects in various synthetic calcium phosphate (CP) powder materials (hydroxyapatite—HA and octacalcium phosphate—OCP) by electron paramagnetic resonance (EPR) spectroscopy at the X, Q, and W-bands (9, 34, 95 GHz for the microwave frequencies, respectively). Currently, CP materials are widely used in orthopedics and dentistry owing to their high biocompatibility and physico-chemical similarity with human hard tissue. It is shown that in addition to the classical EPR techniques, other experimental approaches such as ELDOR-detected NMR (EDNMR), electron spin echo envelope modulation (ESEEM), and electron-nuclear double resonance (ENDOR) can be used to analyze the electron–nuclear interactions of CP powders. We demonstrated that the value and angular dependence of the quadrupole interaction for 14N nuclei of a nitrate radical can be determined by the EDNMR method at room temperature. The ESEEM technique has allowed for a rapid analysis of the nuclear environment and estimation of the structural positions of radiation-induced centers in various crystal matrices. ENDOR spectra can provide information about the distribution of the nitrate radicals in the OCP structure.

X-Ray Diffraction and Multifrequency EPR Study of Radiation-Induced Room Temperature Stable Radicals in Octacalcium Phosphate

Octacalcium phosphate (OCP) {Ca8H2(PO4)6×5H2O] has attracted increasing attention over the last decade as a transient intermediate to the biogenic apatite for bone engineering and in studies involving the processes of pathological calcification. In this work, OCP powders obtained by hydrolysis of dicalcium phosphate dehydrate were subjected to X- and γ-ray irradiation and studied by means of stationary and pulsed electron paramagnetic resonance at 9, 36 and 94 GHz microwave frequencies. Several types of paramagnetic centers were observed in the investigated samples. Their spectroscopic parameters (components of the g and hyperfine tensors) were determined. Based on the extracted parameters, the induced centers were ascribed to H0, CO33-, CO2- and nitrogen-centered (presumably NO32-) radicals. The spectroscopic parameters of the nitrogen-centered stable radical in OCP powders were found to be markedly different from those in hydroxyapatite. According to X-ray diffraction data, γ-ray irradiation allowed the phase composition of calcium phosphates to change; all minor phases with the exception of OCP and hydroxyapatite disappeared, while the OCP crystal lattice parameters changed after irradiation. The obtained results could be used for the tracing of mineralization processes from their initiation to completion of the final product, identification of the OCP phase, and to follow the influence of radiation processes on phase composition of calcium phosphates.

Mesoporous Iron(III)-Doped Hydroxyapatite Nanopowders Obtained via Iron Oxalate

Mesoporous hydroxyapatite (HA) and iron(III)-doped HA (Fe-HA) are attractive materials for biomedical, catalytic, and environmental applications. In the present study, the nanopowders of HA and Fe-HA with a specific surface area up to 194.5 m²/g were synthesized by a simple precipitation route using iron oxalate as a source of Fe³⁺ cations. The influence of Fe³⁺ amount on the phase composition, powders morphology, Brunauer–Emmett–Teller (BET) specific surface area (S), and pore size distribution were investigated, as well as electron paramagnetic resonance and Mössbauer spectroscopy analysis were performed. According to obtained data, the Fe³⁺ ions were incorporated in the HA lattice, and also amorphous Fe oxides were formed contributed to the gradual increase in the S and pore volume of the powders. The Density Functional Theory calculations supported these findings and revealed Fe³⁺ inclusion in the crystalline region with the hybridization among Fe-3d and O-2p orbitals and a partly covalent bond formation, whilst the inclusion of Fe oxides assumed crystallinity damage and rather occurred in amorphous regions of HA nanomaterial. In vitro tests based on the MG-63 cell line demonstrated that the introduction of Fe³⁺ does not cause cytotoxicity and led to the enhanced cytocompatibility of HA.

Nanofibers of polycaprolactone containing hydroxyapatite doped with aluminum/vanadate ions for wound healing applications

The combined doping of aluminum and vanadate ions into the structure of hydroxyapatite encapsulated in polycaprolactone nanofibers might represent a simple approach for wound dressing design.