Transition Mechanism from Nonlamellar to Well-Ordered Lamellar Phases: Is the Lamellar Liquid-Crystal Phase a Must?

Adsorption and Aggregation Behaviors of Oleyl Alcohol-Based Extended Surfactant and Its Mixtures

An oleyl alcohol-based extended surfactant, sodium oleyl polyethylene oxide-polypropylene oxide sulfate (OE3P3S), was synthesized and identified using FT-IR and 1H NMR. The adsorption and aggregation behaviors of OE3P3S and its mixture with cationic surfactant alkyltrimethylammoniumbromide (ATAB) were investigated under different molar ratios. The static surface tension analysis indicated that the critical micellization concentration (cmc) and the critical surface tension (γcmc) of OE3P3S were 0.72 mmol/L, and 36.16 mN/m, respectively. The cmc and γcmc values of the binary system were much lower than that of the individual component. And the cmc values of OE3P3S/ATAB = 6:4 mixtures decreased with an increase in the chain length of the cationic surfactant in the binary system. It was found from the dynamic surface tension that there was a slower diffusion rate in the binary system compared to the pure surfactant, and the adsorption processes for OE3P3S/ATAB = 6:4 were mixed diffusion-kinetic adsorption mechanisms. With a combination of DLS data and TEM measurements, formations of vesicles in OE3P3S/ATAB = 6:4 solutions appeared to occur at a concentration of 0.05 mmol/L. By studying the formation of liquid crystal structures in an emulsion prepared with OE3P3S as the surfactant, it was found that the oil-in-water emulsion is birefringent with a Maltese cross texture, and the rheological properties revealed its predominant viscoelastic behavior and shear thinning properties.

Protein Interface Regulating the Inserting Process of Imidazole Ionic Liquids into the Cell Membrane

Ionic liquids (ILs) have shown promising potential in membrane protein extraction; however, the underlying mechanism remains unclear. Herein, we employed GPU-accelerated molecular dynamics (MD) simulations to investigate the dynamic insertion process of ILs into cell membranes containing membrane proteins. Our findings reveal that ILs spontaneously insert into the membrane, and the presence of membrane proteins significantly decelerates the rate of IL insertion into the membrane. Specifically, the relationship between the insertion rate and inserting free energy exhibits non-monotonic changes, which can be attributed to interfacial effects. The protein-water interface acts as trap for free ions and ionic clusters, while free ions preferentially insert into the membrane from the protein-lipid interface, which limits the insertion rate due to its narrowness. Thus, the insertion rate is governed by a combination of the free energy and interfacial effects. These findings provide valuable insights into the interfacial effects of protein-lipid bilayers and have implications for various biochemical-related applications.

A Novel Strategy for the Characterization of Self-Assembled Structures Using the Static Solid-State Phosphorus Nuclear Magnetic Resonance Technique

Structural characterization of assemblies in solutions is essential for understanding the relationship between the structure and material properties. In this study, we introduce a novel approach to investigate amphiphilic self-assemblies in solutions using the phospholipid molecule 1-palmitoyl-2-hydroxy-sn-glycero-3-phosphocholine (Lyso PC) as a 31P NMR probe. The high natural abundance and gyromagnetic ratio of 31P make it one of the most sensitive nuclei in the low-frequency region, enabling efficient detection even in dilute solutions. Lyso PC can readily co-assemble with amphiphilic molecules and ions in aqueous solutions, forming various structures, such as hexagonal, lamellar, and micellar assemblies. The characteristic line shapes of these assemblies reflect the chemical environment around the probe and provide insights into the different phase states of the assemblies. This strategy offers a simple, cost-effective, and static method for obtaining structural information about various assemblies. Our work not only introduces a sensitive probe for characterizing assemblies in a solvent environment but also inspires new ideas for the development of similar spectroscopic probes.

Transition Mechanism from the Metastable Two-Dimensional Gel to the Stable Three-Dimensional Crystal of Imidazolium-Based Ionic Liquids

One important quest for making high quality materials with amphiphiles is to understand how a disordered self-assembly changes to a stable crystalline state. Herein, we addressed the basic question by investigating the phase transition mechanism of imidazolium-based ionic liquid (IL) [C16mim]Br, using time-resolved small- and wide-angle X-ray scattering (SAXS-WAXS), differential scanning calorimetry, and Fourier transform infrared spectroscopy techniques. Totally, a hexagonal phase, two lamellar-gel phases, and three lamellar-crystalline phases were observed, showing the special polymorphism of the system. It was demonstrated that at low concentrations the two-dimensional gel phase (Lβ1) transforms into the most stable lamellar-crystal phase (Lc3) through two intermediate crystalline phases Lc1 and Lc2. At high concentrations, the Lβ1 phase changes to a condensed lamellar gel phase (Lβ2) before changing to Lc2 and eventually to Lc3. Comparative studies using [C16mim]Cl and [C16mim]NO3 unveiled that the interactions between the counterions and the headgroups of the IL, as well as the dehydration process, govern the nucleation process of Lc3 and thus the formation of the crystal. The in-depth investigation on the transition mechanism and the phase polymorphism in the present work advances our understanding of the crystallization of amphiphilic ionic liquids in dispersions and would promote future applications.

Free-Standing Two-Dimensional Crystals Formed from Self-Assembled Ionic Liquids

The fabrication of two-dimensional crystals (2DCs) has attracted very large interest because it creates materials with various surface structural features and special surface properties. Normally, this is limited to sheets networked together with strong covalent or coordination bonds. Against this understanding, we discovered macroscopic scale free-standing 2DCs in the aqueous dispersions of [C_nmim]X (X = Br, NO₃; n = 14, 16, 18) using simultaneous synchrotron small- and wide-angle X-ray scattering techniques. On the other hand, the 2DCs are also a kind of novel hydrogel holding water content up to 98 wt %. This unusual phenomenon is attributed to the weak interactions between imidazole headgroups and counterions. The observation reported in this work is expected to contribute to theorists in their pursuit of the general principles governing the stability of 2D materials. It may also enlighten experimentalists in designing new free-standing 2DCs for various applications.

Insights into the interactions between cellulose and biological molecules

Understanding the interactions between carbohydrate polymer molecules and biomolecules is of primary significance for its application. In this paper, the interaction between cellulose and biomolecules was studied using density functional theory method, in which cellobiose, nucleobases, and aromatic amino acids were employed as the structural models of cellulose, DNA, and protein, respectively. Quantitative molecular surface electrostatic potential (ESP) results well represented how cellulose perceived by organism during the recognition. The structural and energetic studies of cellulose with biomolecules complexes show that weak interactions, such as hydrogen bonding interaction, vdW interaction, and pi-H interaction, play an important role in stabilizing these complexes. Through systematic wavefunction analysis, including reduced density gradient (RDG) and natural bond orbital (NBO) methods, the nature of these weak interactions was revealed and further graphically visualized. In-depth understanding of the interaction between cellobiose with biological model molecules may shed lights on the application of carbohydrate polymer-based materials in biological fields.

Self-Assembly of a C16M[Mn] Magnetic Surfactant in Water

A magnetic surfactant, which combines the properties of a surfactant with magnetic responsiveness, shows great potential in biotechnology, separation, adsorption, and catalysis, especially in non-invasive manipulation through a magnetic field. However, a molecularly magnetic surfactant is usually paramagnetic for the amorphous and less ordered structures. In this work, magnetic surfactant 1-methyl-3-hexadecane-imidazolium [MnCl₂Br] (C₁₆M[Mn]) is reported to self-assemble in water. The C₁₆M[Mn] magnetic surfactant self-assembles in water to form a lamellar hydrogel from 10 to 50 wt % at and below room temperature. The hydrogel changes from a gel to a sol at 30 °C, and the hexadecane chains in the hydrogel change from noncrystalline to crystalline at 0 °C. In the hydrogel state, the lamellar domain spacing is varied from 36 to 45 nm depending on the concentration and self-assembly temperature. After self-assembly, the magnetic susceptibility of the freeze-dried magnetic surfactant is increased. Most important is the fact that the freeze-dried sample at a high concentration (40-50 wt %) shows the highest magnetic susceptibility, which is related to the closer molecular packing and the more ordered structures. The self-assembly-induced increase in magnetic susceptibility provides a method for improving the magnetic properties of a magnetic surfactant.

Thermodynamical Origin of Nonmonotonic Inserting Behavior of Imidazole Ionic Liquids into the Lipid Bilayer

The GPU-accelerated molecular dynamics simulations are performed to explore the dynamical inserting process of ionic liquids (ILs) into the lipid bilayer. We found that the free ions and clusters coexist in the system, but only the cation can insert into the lipid bilayer. In specific, after a microsecond-scale simulation (up to 1.16 μs), the inserting rate increases first and then decreases nonmonotonic as side chain of cation (n_chain) elongates, peaking at n_chain = 10. However, the inserting free energy decreases with n_chain, indicating the inserting process is easier for the larger n_chain. Such contrary originates from the formation of cluster, where the cluster dissociating energy shows that only cluster for n_chain ≤ 10 can dissociate spontaneously. Hence, the inserting rate is determined by the balance between n_chain and cluster stability. These quantitative competition mechanisms shed light to the rational design of the biocompatible ILs toward their applications in the biochemical-related fields.