Enhanced Photogeneration of Polaron Pairs in Neat Semicrystalline Donor-Acceptor Copolymer Films via Direct Excitation of Interchain Aggregates

Long-Range Charge Separation Enabled by Intramoiety Delocalized Excitations in Copolymer Donors in Organic Photovoltaic Blends

For over two decades, most high-performance organic photovoltaics (OPVs) have been made with donor:acceptor bulk heterojunctions with domain sizes limited by exciton diffusion, where charge separation mostly takes place through the dissociation of the interfacial charge-transfer (xCT) excitons. Recently, nonfullerene acceptor (NFA)-based OPVs have shown excellent compatibility to device structures with large domains in active layers. However, it remains elusive how the excitations that are distant from the interfaces are converted into free charges. Here, we report the identification of a new charge separation channel in model copolymer/NFA blends mediated by intra-moiety delocalized excitations in both planar heterojunctions and donor-enriched bulk heterojunctions. The delocalized excitations induced by interchromophore electronic interactions in copolymer donors mediate the long-range charge separation and dissociate into free charges without forming the bound xCT states first, releasing the constraints associated with the short exciton diffusion length in organic materials. The long-range charge separation mechanism uncovered in this work, in cooperation with the short-range xCT-mediated pathway, holds the potential to further optimize OPVs with diverse device structures.

Generating Long-Lived Triplet Excited States in Narrow Bandgap Conjugated Polymers

Narrow bandgap conjugated polymers are a heavily studied class of organic semiconductors, but their excited states usually have a very short lifetime, limiting their scope for applications. One approach to overcome the short lifetime is to populate long-lived triplet states for which relaxation to the ground state is forbidden. However, the triplet lifetime of narrow bandgap polymer films is typically limited to a few microseconds. Here, we investigated the effect of film morphology on triplet dynamics in red-emitting conjugated polymers based on the classic benzodithiophene monomer unit with the solubilizing alkyl side chains C₁₆ and C₂C₆ and then used Pd porphyrin sensitization as a further strategy to change the triplet dynamics. Using transient absorption spectroscopy, we demonstrated a 0.45 ms triplet lifetime for the more crystalline nonsensitized polymer C₂C₆, 2-3 orders of magnitude longer than typically reported, while the amorphous C₁₆ had only a 5 μs lifetime. The increase is partly due to delaying bimolecular electron-hole recombination in the more crystalline C₂C_6, where a higher energy barrier for charge recombination is expected. A triplet lifetime of 0.4 ms was also achieved by covalently incorporating 5% of Pd porphyrin into the C₁₆ polymer, which introduced extra energy transfer steps between the polymer and porphyrin that delayed triplet dynamics and increased the polymer triplet yield by 7.9 times. This work demonstrates two synthetic approaches to generate the longest-lived triplet excited states in narrow bandgap conjugated polymers, which is of necessity in a wide range of fields that range from organic electronics to sensors and bioapplications.

Photoinduced Polaron Formation in a Polymerized Electron-Acceptor Semiconductor

Polymerized small molecular acceptor (PSMA) based all-polymer solar cells (all-PSC) have achieved power conversion efficiencies (PCE) over 16%, and the PSMA is considered to hold great promise for further improving the performance of all-PSC. Yet, in comparison with that of the polymer donor, the photophysics of a polymerized acceptor remains poorly understood. Herein, the excited state dynamics in a polymerized acceptor PZT810 was comprehensively investigated under various pump intensities and photon energies. The excess excitation energy was found to play a key role in excitons dissociation into free polarons for neat PSMA films, while free polarons cannot be generated from the polaron pairs in neat acceptor films. This work reveals an in-depth understanding of relaxation dynamics for PSMAs and that the underlying photophysical origin of PSMA can be mediated by excitation energies and intensities. These results would benefit the realization of the working mechanism for all-PSC and the designing of new PSMAs.

Strong Bathochromic Shift of Conjugated Polymer Nanowires Assembled with a Liquid Crystalline Alkyl Benzoic Acid via a Film Dispersion Process

We present aqueous dispersions of conjugated polymer nanowires (CPNWs) with improved light absorption properties aimed at aqueous-based applications. We assembled films of a donor-acceptor-type conjugated polymer and liquid crystalline 4-n-octylbenzoic acid by removing a cosolvent of their mixture solutions, followed by annealing of the films, and then formed aqueous-dispersed CPNWs with an aspect ratio >1000 by dispersing the films under ultrasonication at a basic pH. X-ray and spectroscopy studies showed that the polymer and liquid crystal molecules form independent domains in film assemblies and highly organized layer structures in CPNWs. Our ordered molecular assemblies in films and aqueous dispersions of CPNWs open up a new route to fabricate nanowires of low-band-gap linear conjugated polymers with the absorption maximum at 794 nm remarkably red-shifted from 666 nm of CPNWs prepared by an emulsion process. Our results suggest the presence of semicrystalline polymorphs β1 and β2 phases in CPNWs due to long-range π-π stacking of conjugated backbones in compactly organized lamellar structures. The resulting delocalization with a reduced energy bang gap should be beneficial for enhancing charge transfer and energy-conversion efficiencies in aqueous-based applications such as photocatalysis.

Interplay between Intrachain and Interchain Excited States in Donor-Acceptor Copolymers

Recently, rapid progress in the power conversion efficiency for organic solar cells (OSCs) is achieved due to the phenomenal development of the nonfullerene electron acceptors. In addition to the pairing electron donors, conjugated donor-acceptor copolymers are another key player in the high-efficiency OSCs. Here, the temporal evolution of excited states in a typical copolymer, PM6, was traced by transient absorption spectroscopy. The spectroscopic result implies the formation of two kinetically correlated intrachain species, polaron excitons and intrachain polaron pairs. In the presence of the interchain interaction, these intrachain species quickly convert into interchain polaron pairs on a time scale of few picoseconds. Our findings reveal that the electron transfer mechanisms in PM6-based OSCs substantially depend on the PM6 environment in the bulk heterojunction blends.

Intrachain and Interchain Exciton-Exciton Annihilation in Donor-Acceptor Copolymers

PM6 is a donor-acceptor copolymer widely used in high-efficiency organic solar cells (OSC). Here, we report the observation of exciton-exciton annihilation (EEA) in both PM6 copolymer solution and film. We find that the EEA mechanisms are distinct in these two systems. In the PM6 solution, EEA occurs via the long-range dipole-dipole interaction between intrachain excitons, while in the PM6 film it takes place between the interchain polaron pairs (spatially indirect excitons) via the short-range Coulomb interaction. The quantum yield of free polaron formation in the film is also quantified, which indicates that EEA leads to extra interchain polaron-pair dissociation, accounting for the enhanced free polaron formation.

Mechanistic Study of Charge Separation in a Nonfullerene Organic Donor-Acceptor Blend Using Multispectral Multidimensional Spectroscopy

Organic photovoltaics (OPVs) based on nonfullerene acceptors are now approaching commercially viable efficiencies. One key to their success is efficient charge separation with low potential loss at the donor-acceptor heterojunction. Due to the lack of spectroscopic probes, open questions remain about the mechanisms of charge separation. Here, we study charge separation of a model system composed of the donor, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione) (PBDB-T), and the nonfullerene acceptor, 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC), using multidimensional spectroscopy spanning the visible to the mid-infrared. We find that bound polaron pairs (BPPs) generated within ITIC domains play a dominant role in efficient hole transfer, transitioning to delocalized polarons within 100 fs. The weak electron-hole binding within the BPPs and the resulting polaron delocalization are key factors for efficient charge separation at nearly zero driving force. Our work provides useful insight into how to further improve the power conversion efficiency in OPVs.

Functional Fibers, Composites and Textiles Utilizing Photothermal and Joule Heating

This review focuses on the mechanism of adjusting the thermal environment surrounding the human body via textiles. Recently highlighted technologies for thermal management are based on the photothermal conversion principle and Joule heating for wearable electronics. Recent innovations in this technology are described, with a focus on reports in the last three years and are categorized into three subjects: (1) thermal management technologies of a passive type using light irradiation of the outside environment (photothermal heating), (2) those of an active type employing external electrical circuits (Joule heating), and (3) biomimetic structures. Fibers and textiles from the design of fibers and textiles perspective are also discussed with suggestions for future directions to maximize thermal storage and to minimize heat loss.

Short contacts between chains enhancing luminescence quantum yields and carrier mobilities in conjugated copolymers

Efficient conjugated polymer optoelectronic devices benefit from concomitantly high luminescence and high charge carrier mobility. This is difficult to achieve, as interchain interactions, which are needed to ensure efficient charge transport, tend also to reduce radiative recombination and lead to solid-state quenching effects. Many studies detail strategies for reducing these interactions to increase luminescence, or modifying chain packing motifs to improve percolation charge transport; however achieving these properties together has proved elusive. Here, we show that properly designed amorphous donor-alt-acceptor conjugated polymers can circumvent this problem; combining a tuneable energy gap, fast radiative recombination rates and luminescence quantum efficiencies >15% with high carrier mobilities exceeding 2.4 cm²/Vs. We use photoluminescence from exciton states pinned to close-crossing points to study the interplay between mobility and luminescence. These materials show promise towards realising advanced optoelectronic devices based on conjugated polymers, including electrically-driven polymer lasers.

Designing conjugated polymers with high charge carrier mobility and fluorescence quantum efficiency, though attractive for optoelectronics, remains challenging. Here, the authors report a strategy for designing donor-acceptor copolymers whose optoelectronic properties exceed the state-of-the-art.

Ultrafast hole transfer mediated by polaron pairs in all-polymer photovoltaic blends

The charge separation yield at a bulk heterojunction sets the upper efficiency limit of an organic solar cell. Ultrafast charge transfer processes in polymer/fullerene blends have been intensively studied but much less is known about these processes in all-polymer systems. Here, we show that interfacial charge separation can occur through a polaron pair-derived hole transfer process in all-polymer photovoltaic blends, which is a fundamentally different mechanism compared to the exciton-dominated pathway in the polymer/fullerene blends. By utilizing ultrafast optical measurements, we have clearly identified an ultrafast hole transfer process with a lifetime of about 3 ps mediated by photo-excited polaron pairs which has a markedly high quantum efficiency of about 97%. Spectroscopic data show that excitons act as spectators during the efficient hole transfer process. Our findings suggest an alternative route to improve the efficiency of all-polymer solar devices by manipulating polaron pairs.

All-polymer solar cells have shown high efficiencies but the ultrafast charge transfer processes are less known. Here Wang et al. show that polaron pairs play vital role facilitating the hole transfer, which is quite different from the exciton dominated pathway in polymer-fullerene blends.

Machine-Washable Smart Textiles with Photothermal and Antibacterial Activities from Nanocomposite Fibers of Conjugated Polymer Nanoparticles and Polyacrylonitrile

Smart textiles based on conjugated polymers have been highlighted as promising fabrics that can intelligently respond to environmental stimuli based on the electrical properties of polymer semiconductors. However, there has been limited interest in the photothermal properties of conjugated polymers that can be applied to smart textiles. We prepared nanoparticles by assembling a conjugated polymer with a fatty acid via an emulsion process and nanocomposite fibers by distributing the conjugated polymer nanoparticles in a polyacrylonitrile matrix. We then fabricated the textiles using the fibers. The resulting fabrics based on nanocomposite fibers show a temperature increase to 50 °C in 10 min under white light irradiation because of efficient photothermal conversion by the conjugated polymer light harvester, while the temperature of a pristine polyacrylonitrile fabric increases to only 35 °C. In addition, excellent antimicrobial activity was confirmed by a 99.9% decrease in the populations of Staphylococcus aureus and Escherichia coli over 24 h because of the effect of the fatty acid in the nanocomposite films and fabrics. Furthermore, the fabric showed efficient durability after a laundry test, suggesting the usefulness of these smart textiles based on conjugated polymer nanoparticles for practical applications.

Polarons in Narrow Band Gap Polymers Probed over the Entire Infrared Range: A Joint Experimental and Theoretical Investigation

We investigate the photoinduced absorption (PIA) spectra of the prototypical donor-acceptor polymer [2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (C-PCPDTBT) and its silicon bridged variant Si-PCPDTBT over a spectral range from 0.07 to 1.5 eV. Comparison between time-dependent density functional theory simulations of the electronic and vibrational transitions of singlet excitons, triplet excitons, polarons, and bipolarons with the experimental results proves that the observed features are due to positive polarons delocalized on the polymer chains. We find that the more crystalline Si-bridged variant gives rise to a red-shift in the transition energies, especially in the mid-infrared (MIR) spectral range and furthermore observe that the pristine polymers' responses depend on the excitation energy. Blending with PCBM, on the other hand, leads to excitation-independent PIA spectra. By computing the response properties of molecular aggregates, we show that polarons are delocalized in not only the intra- but also the interchain direction, leading to intermolecular transitions which correspond well to experimental absorption features at the lowest energies.