Salt Promotes Protonation of Amine Groups at Air/Water Interface

Light on the interactions between nanoparticles and lipid membranes by interface-sensitive vibrational spectroscopy

Nanoparticles are produced in natural phenomena or synthesized artificially for technological applications. Their frequent contact with humans has been judged potentially harmful for health, and numerous studies are ongoing to understand the mechanisms of the toxicity of nanoparticles. At the macroscopic level, the toxicity can be established in vitro or in vivo by measuring the survival of cells. At the sub-microscopic level, scientists want to unveil the molecular mechanisms of the first interactions of nanoparticles with cells via the cell membrane, before the toxicity cascades within the whole cell. Unveiling a molecular understanding of the nanoparticle-membrane interface is a tricky challenge, because of the chemical complexity of this system and its nanosized dimensions buried within bulk macroscopic environments. In this review, we highlight how, in the last 10 years, second-order nonlinear optical (NLO) spectroscopy, and specifically vibrational sum frequency generation (SFG), has provided a new understanding of the structural, physicochemical, and dynamic properties of these biological interfaces, with molecular sensitivity. We will show how the intrinsic interfacial sensitivity of second-order NLO and the chemical information of vibrational SFG spectroscopy have revealed new knowledge of the molecular mechanisms that drive nanoparticles to interact with cell membranes, from both sides, the nanoparticles and the membrane properties.

Modifying Specific Ion Effects: Studies of Monovalent Ion Interactions with Amines

Specific ion effects in the interactions of monovalent anions with amine groups─one of the hydrophilic moieties found in proteins─were investigated using octadecylamine monolayers floating at air-aqueous solution interfaces. We find that at solution pH 5.7, larger monovalent anions induce a nonzero pressure starting at higher areas/molecules, i.e., a wider "liquid expanded" region in the monolayer isotherms. Using X-ray fluorescence at near total reflection (XFNTR), an element- and surface-specific technique, ion adsorption to the amines at pH 5.7 is confirmed to be ion-specific and to follow the conventional Hofmeister series. However, at pH 4, this ion specificity is no longer observed. We propose that at the higher pH, the amine headgroups are only partially protonated, and large polarizable ions such as iodine are better able to boost amine protonation. At the lower pH, on the other hand, the monolayer is fully protonated, and electrostatic interactions dominate over ion specificity. These results demonstrate that ion specificity can be modified by changing the experimental conditions.

Monovalent ion-graphene oxide interactions are controlled by carboxylic acid groups: Sum frequency generation spectroscopy studies

Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO-ion-water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. We also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.

Tuning Surface Molecular Design of Porous Carbon for Blue Energy Harvesting

Capacitive mixing is a promising blue energy technology due to its membrane-free electricity generation and long electrode life cycle. However, because of limited performance, existing systems do not lend themselves to practical implementation. Although it is a crucial factor directly influencing electrode behavior, surface chemistry has largely been overlooked in capacitive mixing. Here, we show that manipulating surface functionalization alone can tune the responses of electrodes to produce a high voltage rise without altering the pore structure of the electrodes. Our findings reveal that the spontaneous electrode potential of a surface-modified carbon electrode shifts negatively proportional to the surface charge due to the surface groups, which explains why and how manipulating the surface chemistry can improve the power generation capacity. Using electrodes fabricated with identical activated carbon material but with different surface treatments, we have achieved a remarkably high power density of 166 mW/m² delivered to an electrical load under a 0.6 M to 0.01 M salinity gradient, with the total power generated of 225 mW/m². The corresponding volumetric power densities were 0.88 kW/m³ net and 1.17 kW/m³ total. The volumetric power density of our prototype is comparable to or better than those of prevailing membrane technologies, such as pressure retarded osmosis and reverse electrolysis, whose volumetric power density values are 1.1 kW/m³ and 0.16 kW/m³, respectively. In the seawater stage, the net power density reached 432 mW/m² or 2.3 kW/m³. Such performance far exceeds existing membrane-free systems, with the highest reported power density of 65 mW/m² under a 0.5 M to 0.02 M salinity gradient (121 mW/m² in this work). The device demonstrated unparalleled durability, maintaining 90% of the maximum energy capacity after 54,000 charge-discharge cycles.

Phase behaviour and adsorption of deoxyribonucleic acid onto an azobenzene liquid crystalline ligand at the interfaces

Azobenzene liquid crystalline (ALC) ligand contains a cholesteryl group linked to an azobenzene moiety through a carbonyl dioxy spacer (C7) and terminated with an amine group as a polar head. The phase behaviour of the C7 ALC ligand at the air-water (A-W) interface is investigated employing surface manometry. The surface pressure-area per molecule isotherm shows that C7 ALC ligand exhibit two different phases following the phase sequence viz., liquid expanded (LE₁ and LE₂) and then collapse to three-dimensional crystallites. Further, our investigations under different pH conditions and in the presence of DNA reveal the following. Compared to the bulk, the acid dissociation constant (pK_a) of an individual amine reduces to 5 at the interfaces. For pH (3.5) < pK_a, the protonation of amine groups of C7 ALC ligand facilitates the condensation of the film and enhances the stability. For pH values > pK_a, the phase behaviour of the ligand remains the same due to the partial dissociation of the amine groups. The presence of DNA in the sub-phase result in the expansion of isotherm to the higher area per molecule and the compressional modulus extracted reveals the phase sequence; liquid expanded, liquid condensed, followed by a collapse. Further, the kinetics of adsorption of DNA to the amine groups of the ligand is investigated, suggesting the interactions are influenced by surface pressure corresponding to different phases and pH of the sub-phase. Brewster angle microscope studies are carried out at different surface densities of the ligand as well as in the presence of DNA also supports this inference. Atomic force microscope is employed to acquire the surface topography and height profile of C7 ALC ligand (1 layer) after transferring on onto a silicon substrate using Langmuir Blodgett deposition. The difference in the surface topography and thickness of the film indicates the adsorption of DNA onto the amine groups of the ligand. The characteristic UV-visible absorption bands of the ligand films (10 layers) at the air-solid interface are tracked and the hypsochromic shift of these bands is also attributed to these DNA interactions.

Sum-Frequency Vibrational Spectroscopic Study of the Cation-π Interaction: Amine and Guanidine

The cation-π interaction is an interaction between a positively charged cation and π electrons in an aromatic group of a molecule. It is considered to play key roles in signal transduction, stabilization of the protein structure, enzyme catalysis in biology, and wet adhesion and biomolecular condensation. In this study, octadecylguanidine hydrochloride (ODG) and octadecylamine (ODA) having guanidine and amine headgroups, respectively, are found to interact with π molecules (phenol or indole) as investigated by sum-frequency vibrational spectroscopy. ODG is unstable and does not form a neat monolayer on the water surface. However, after adding π molecules into subphase water, it becomes more stable against dissolution as evidenced by the appearance of its CH_x peaks and a CH peak of the aromatic ring in the sum-frequency spectrum. Unlike ODG, ODA forms a stable monolayer on the water surface at a neutral pH. After adding π molecules into the solution, the amine-π interaction promotes the protonation of the amine headgroup and the penetration of the π molecules makes the ODA monolayer more disordered. Indole is found to be more effective in binding with the ODG as compared to phenol.

Recovery of Fatty Acid Monolayers by Salts Investigated by Sum-Frequency Generation Spectroscopy

Langmuir monolayers consisting of fatty acids with relatively short alkyl chains (C₁₄H₂₉COOH (pentadecanoic acid), C₁₅H₃₁COOH (palmitic acid), and C₁₆H₃₃COOH (heptadecanoic acid)) are stable at a neutral pH (pH ≈ 6) but become unstable at a high pH (pH ≈ 11). Further addition of a small amount of divalent salt in subphase water was found to recover the monolayer at a high pH because binding of the divalent cations to the carboxylic headgroups renders the molecule more stable against dissolution in subphase water. This revival of the monolayer was observed via a pressure-area isotherm measurement and sum-frequency generation spectrum in the CH_x and OH ranges. Fatty acids with longer alkyl chains needed less amount of MgCl₂ to recover the monolayer at a high pH. A much lower concentration of Mg²⁺ as compared to Ca²⁺ is required to revive fatty acid molecules to the surface. Monovalent and trivalent salts were compared with the above divalent salts on the ability to recover the fatty acid monolayers.

Anions Enhance Rare Earth Adsorption at Negatively Charged Surfaces

Anions are expected to be repelled from negatively charged surfaces. At aqueous interfaces, however, ion-specific effects can dominate over direct electrostatic interactions. Using multiple in situ surface sensitive experimental techniques, we show that surface affinities of SCN^- anions are so strong that they can adsorb at a negatively charged floating monolayer at the air-aqueous interface. This extreme example of ion-specific effects may be very important for understanding complex processes at aqueous interfaces, such as chemical separations of rare earth metals. Adsorbed SCN^- ions at the floating monolayer increase the overall negative charge density, leading to enhanced trivalent rare earth adsorption. Surface sensitive X-ray fluorescence measurements show that the surface coverage of Lu³⁺ ions can be triple the apparent surface charge of the floating monolayer in the presence of SCN^-. Comparison to NO₃^- samples shows that the effects are strongly dependent on the character of the anion, providing further evidence of ion-specific effects dominating over electrostatics.