Self-Assembly-Triggered Cis-to-Trans Conversion of Azobenzene Compounds

Photoswitchable Detergents for Light-Controlled Liposome Lysis and Channel Gating

Modulation of membrane properties via photoswitchable lipids has attracted attention due to the unparalleled spatiotemporal resolution of their functional control. Beside lipids, detergents are another prominent class for selective membrane perturbations owing to their ease of handling and spontaneous insertion in lipid bilayers. Herein, we describe the synthesis and characterization of three classes of visible light-sensitive surfactants with various azobenzene tail chain lengths. The photoswitchable detergents show water-solubility and micellization as well as undergo reversible isomerization under blue-/green light illumination. We demonstrate that the light-induced structural change of azobenzene can lead to vesicle rupture, making them a tool for controlled cargo release from vehicles. Via spontaneous insertion into the plasma membrane of mammalian cells transiently transfected with MscL, we used the azobenzene-derived detergents to optically activate the transmembrane mechanosensitive channel. This led to the rapid controlled uptake of membrane-impermeable molecules. Since detergents are extensively used in biochemistry and biotechnology, we propose that the photoswitchable detergents will be useful tools for the spatiotemporal modulation of membrane properties. Additionally, our work provides a design strategy for new detergents in membrane (protein) research.

The interplay of chromophore-spacer length in light-induced gold nanocluster self-assembly

The light-induced self-assembly of chromophore-tethered precision nanoclusters (NCs) has recently received significant attention due to their facile control over structure, function, and reversibility under ambient conditions. However, the magnitude of assembly depends on the photoswitching efficiency, chemical structure, and proximity of the chromophore to the NC surface. Herein, using azobenzene alkyl monothiol (AMT)-capped gold NCs with two different spacer lengths (denoted as C3-NC and C9-NC), we show that reversible cis ↔ trans isomerization efficiency can be readily tuned to control the self-assembly kinetics of NCs. Irrespective of the chain length, the time required for trans-to-cis (140 s) and cis-to-trans (260 s) isomerization of individual C3-AMT and C9-AMT is identical in dichloromethane solution. When a similar experiment was performed using a solution of C3-NCs and C9-NCs, it resulted in self-assembled disc-like superstructures. Notably, the trans-to-cis photoswitching in C3-NC could reach only 65% even after 460 seconds of irradiation. On the other hand, C9-NC completed this process within 160 seconds of irradiation. The low photoswitching efficiency of the C3-NC analog is due to the short and rigid spacer length of C3-AMT ligands, which are in close proximity to the NC surface, resulting in steric hindrance experienced at the NC-chromophore interface. Importantly, the slow photoswitching in C3-NCs helps isolate and investigate the intermediates of assembly. Using high-resolution electron microscopy, atomic force microscopy, and 3D reconstruction, we show that the discs are made up of densely packed arrays of NCs. The prolonged illumination of C9-NCs results in a chain-like assembly due to the dipolar attraction between the previously assembled superstructures. The efficient photoisomerization of chromophores located away from the nanocluster surface has been identified as the key element to speed up the light-induced assembly in chromophore-tethered nanoclusters. Such information will be useful while developing nanoscale photoswitches for electrochemistry, biosensors, and electronic devices.

Recent Progress in Azobenzene-Based Supramolecular Materials and Applications

Azobenzene-containing small molecules and polymers are functional photoswitchable molecules to form supramolecular nanomaterials for various applications. Recently, supramolecular nanomaterials have received enormous attention in material science because of their simple bottom-up synthesis approach, understandable mechanisms and structural features, and batch-to-batch reproducibility. Azobenzene is a light-responsive functional moiety in the molecular design of small molecules and polymers and is used to switch the photophysical properties of supramolecular nanomaterials. Herein, we review the latest literature on supramolecular nano- and micro-materials formed from azobenzene-containing small molecules and polymers through the combinatorial effect of weak molecular interactions. Different classes including complex coacervates, host-guest systems, co-assembled, and self-assembled supramolecular materials, where azobenzene is an essential moiety in small molecules, and photophysical properties are discussed. Afterward, azobenzene-containing polymers-based supramolecular photoresponsive materials formed through the host-guest approach, polymerization-induced self-assembly, and post-polymerization assembly techniques are highlighted. In addition to this, the applications of photoswitchable supramolecular materials in pH sensing, and CO2 capture are presented. In the end, the conclusion and future perspective of azobenzene-based supramolecular materials for molecular assembly design, and applications are given.

Portable Sensor Array for On-Site Detection and Discrimination of Pesticides and Herbicides Using Multivariate Analysis

Modern agricultural practice relies heavily on pesticides and herbicides to increase crop productivity, and consequently, their residues have a negative impact on the environment and public health. Thus, keeping these issues in account, herein we developed an azodye-based chromogenic sensor array for the detection and discrimination of pesticides and herbicides in food and soil samples, utilizing machine learning approaches such as hierarchical clustering analysis, principal component analysis, linear discriminant analysis (LDA), and partial least square regression (PLSR). The azodye-based sensor array was developed in combination with various metal ions owing to their different photophysical properties, which led to distinct patterns toward various pesticides and herbicides. The obtained distinct patterns were recognized and processed through automated multivariate analysis, which enables the selective and sensitive identification and discrimination of various target analytes. Further, the qualitative and quantitative determination of target analytes were performed using LDA and PLSR; the results obtained show a linear correlation with varied concentrations of target analytes with R2 values from 0.89 to 0.96, the limit of detection from 5.3 to 11.8 ppm with a linear working range from 1 to 30 μM toward analytes under investigation. Further, the developed sensor array was successfully utilized for the discrimination of a binary mixture of pesticide (chlorpyrifos) and herbicide (glyphosate).

Aqueous coordination polymer complexes: From colloidal assemblies to bulk materials

1-dimensional (1D) coordination polymers refer to the macromolecules that have metal ions incorporated in their pendent groups or main chain through metal-binding ligand groups. They have intrinsic advantages over traditional polymers to regulate the polymer structures and functions owing to the nature of the metal-ligand bond. Consequently, they have great potential for the development of smart and functional structures and materials and therapeutic agents. Water-soluble 1D coordination polymers and assemblies are an important subtype of coordination polymers with distinctive interests for demanding applications in aqueous systems, such as biological and medical applications. This review highlights the recent progress and research achievements in the design and use of water-soluble 1D coordination polymers and assemblies. The overview covers the design and structure control of 1D coordination polymers, their colloidal assemblies, including nanoparticles, nanofibers, micelles and vesicles, and fabricated bulk materials such as membraneless liquid condensates, security ink, hydrogel actuators, and smart fabrics. Finally, we discuss the potential applications of several of these coordination polymeric structures and materials and give an outlook on the field of aqueous coordination polymers.

Photoswitching/back-switching assessment of biobased cellulose acetate/azobenzene handleable films under visible-light LED irradiation

The light-induced processes performed by photofunctional polymer films are crucial aspects of developing integrated energy storage devices properly. Herein, we report the preparation, characterization, and study of the optical properties of a series of biobased cellulose acetate/azobenzene (CA/Az1) handleable films at different compositions. The photoswitching/back-switching behavior of the samples was investigated using varied LED irradiation sources. Additionally, poly(ethylene glycol) (PEG) was deposited onto cellulose acetate/azobenzene films to study the back-switching process's effect and nature in the fabricated films. Interestingly, the melting enthalpies of PEG before and after being irradiated with blue LED light were 2.5 mJ and 0.8 mJ, respectively. Conveniently, FTIR and UV-visible spectroscopy, thermogravimetry (TGA), contact angle, differential scanning calorimetry (DSC), polarized light microscopy (PLM), and atomic force microscopy (AFM) were used for the characterization of the sample films. Complementarily, theoretical electronic calculations provided a consistent approach to the energetic change in the dihedral angles and non-covalent interaction for the trans and cis isomer in the presence of cellulose acetate monomer. The results of this study revealed that CA/Az1 films are viable photoactive materials displaying handleability attributes with potential uses in harvesting, converting, and storing light energy.

Development of composite optical waveguide based on azobenzene-modified titanium metal-organic framework film for study of gas adsorption kinetics

This study investigates the fabrication and gas adsorption kinetics of an azobenzene (AZB)-modified titanium metal-organic framework (AZB@Ti-MOF) film composite optical waveguide (COWG) that recognizes ethylenediamine (EDA) gas. After modification with AZB, the surface of the Ti-MOF film became rough and evolved from a hemispherical structure to a petal-like structure; a large pore size and small specific surface area accompanied the evolution of the surface morphology. The AZB@Ti-MOF film COWG exhibited a positive response to EDA gas co-existing with the same concentration (1000 ppm) of benzenes, amines, and acidic gases. It is postulated that charge transfer occurs when the AZB@Ti-MOF film COWG adsorbs EDA gas, leading to significant strengthening of the intramolecular hydrogen bonds as EDA works as an electron donor. Incomplete or prolonged EDA desorption from the film surface at room temperature resulted in a decrease in the surface sensitivity of the COWG AZB@Ti-MOF film. The kinetics of EDA adsorption were examined using pseudo-first-order and pseudo-second-order (PSO) kinetic models. The EDA adsorption kinetics fit well with the PSO model. As measured at room temperature, the adsorption capacity (q_e) per unit surface of the AZB@Ti-MOF films was 46.50 × 10^-2 µg·cm^-2.

Surface supramolecular assemblies tailored by chemical/physical and synergistic stimuli: a scanning tunneling microscopy study

Supramolecular self-assemblies formed by various non-covalent interactions can produce diverse functional networks on solid surfaces. These networks have recently attracted much interest from both fundamental and application points of view. Unlike covalent organic frameworks (COFs), the properties of the assemblies differ from each other depending on the constituent motifs. These various motifs may find diverse applications such as in crystal engineering, surface modification, and molecular electronics. Significantly, these interactions between/among the molecular tectonics are relatively weak and reversible, which makes them responsive to external stimuli. Moreover, for a liquid-solid-interface environment, the dynamic processes are amenable to in situ observation using scanning tunneling microscopy (STM). In the literature, most review articles focus on supramolecular self-assembly interactions. This review summarizes the recent literature in which stimulation sources, including chemical, physical, and their combined stimuli, cooperatively tailor supramolecular assemblies on surfaces. The appropriate design and synthesis of functional molecules that can be integrated on different surfaces permits the use of nanostructured materials and devices for bottom-up nanotechnology. Finally, we discuss synergic effect on materials science.

Light-Responsive Molecular Release from Cubosomes Using Swell-Squeeze Lattice Control

Stimuli-responsive materials are crucial to advance controlled delivery systems for drugs and catalysts. Lyotropic liquid crystals (LLCs) have well-defined internal structures suitable to entrap small molecules and can be broken up into low-viscosity dispersions, aiding their application as delivery systems. In this work, we demonstrate the first example of light-responsive cubic LLC dispersions, or cubosomes, using photoswitchable amphiphiles to enable external control over the LLC structure and subsequent on-demand release of entrapped guest molecules. Azobenzene photosurfactants (AzoPS), containing a neutral tetraethylene glycol head group and azobenzene-alkyl tail, are combined (from 10-30 wt %) into monoolein-water systems to create LLC phases. Homogenization of the bulk LLC forms dispersions of particles, ∼200 nm in diameter with internal bicontinuous primitive cubic phases, as seen using small-angle X-ray scattering and cryo-transmission electron microscopy. Notably, increasing the AzoPS concentration leads to swelling of the cubic lattice, offering a method to tune the internal nanoscale structure. Upon UV irradiation, AzoPS within the cubosomes isomerizes within seconds, which in turn leads to squeezing of the cubic lattice and a decrease in the lattice parameter. This squeeze mechanism was successfully harnessed to enable phototriggerable release of trapped Nile Red guest molecules from the cubosome structure in minutes. The ability to control the internal structure of LLC dispersions using light, and the dramatic effect this has on the retention of entrapped molecules, suggests that these systems may have huge potential for the next-generation of nanodelivery.

Azobenzene-Based Solar Thermal Fuels: A Review

The energy storage mechanism of azobenzene is based on the transformation of molecular cis and trans isomerization, while NBD/QC, DHA/VHF, and fulvalene dimetal complexes realize the energy storage function by changing the molecular structure. Acting as "molecular batteries," they can exhibit excellent charging and discharging behavior by converting between trans and cis isomers or changing molecular structure upon absorption of ultraviolet light. Key properties determining the performance of STFs are stored energy, energy density, half-life, and solar energy conversion efficiency. This review is aiming to provide a comprehensive and authoritative overview on the recent advancements of azobenzene molecular photoswitch system in STFs fields, including derivatives and carbon nano-templates, which is emphasized for its attractive performance. Although the energy storage performance of Azo-STFs has already reached the level of commercial lithium batteries, the cycling capability and controllable release of energy still need to be further explored. For this, some potential solutions to the cycle performance are proposed, and the methods of azobenzene controllable energy release are summarized. Moreover, energy stored by STFs can be released in the form of mechanical energy, which in turn can also promote the release of thermal energy from STFs, implying that there could be a relationship between mechanical and thermal energy in Azo-STFs, providing a potential direction for further research on Azo-STFs.

Tuning magnetic properties by crystal engineering in a family of coordination polymers based on Ni(ii) sulphates

A new family of hybrid organic–inorganic layered materials based on nickel sulfates was synthesized using a one-pot, solvent-free synthetic approach using 1,2-phenylenediamine (OPD), 1,3-phenylenediamine (MPD) and 1,4-phenylenediamine (PPD).

α-Cyclodextrin-Catalyzed Symmetry Breaking and Precise Regulation of Supramolecular Self-Assembly Handedness with Harata-Kodaka's Rule

Harata-Kodaka's rule predicting the induced chirality of the guest molecules by cyclodextrins has been discovered in the 1970-1990s, yet its ability to control the supramolecular handedness of self-assembled structures has not been sufficiently recognized. Here we show that in a coordinating self-assembly system that is able to form racemic cone shells symmetry breaking occurs if the ligand is prethreaded into α-cyclodextrin prior to metal ion addition, and the handedness of cone shells can be rationally manipulated by creating the two scenarios of the Harata-Kadaka rule through controlling the host-guest dynamics. Since the coordination complexes have strong self-assembling ability, the coordinating ligand would dethread from the cavity of α-cyclodextrin but leaving the induced chirality to the coordinating self-assembly, thus catalyzing symmetry breaking. This work reveals that the dynamic factors such as concentration and molar ratio may play important roles in symmetry breaking at the supramolecular level. The current strategy provides a promising method for the symmetry breaking and manipulation of the handedness of self-assembled materials formed by achiral molecules.

Influence of a Substituted Methyl on the Photoresponsive Third-Order Nonlinear-Optical Properties Based on Azobenzene Metal Complexes

For studying the effect of a substituted group on the photoresponsive third-order nonlinear-optical (NLO) properties, photosensitive azobenzene derivative H₂L1 was first selected to construct metal complexes {[Zn₂(L1)₂(H₂O)₃]·2DMA)}_n (1) and {[Cd(L1)(4,4'-bpy)H₂O]·H₂O}_n (2). Then H₂L2 with a substituted methyl on the azobenzene ring was used to construct complexes {[Zn(L2)(4,4'-bpy)(H₂O)]}_n (3) and {[Cd(L2)(4,4'-bpy)(H₂O)]}_n (4). When the azobenzene moiety of the complexes is trans, the NLO behaviors of the complexes are the same. However, after the azobenzene moiety is excited by ultraviolet (UV) light to change from trans to cis, the substituted methyl increases the repulsion between two azobenzene rings in 3 and 4, thereby affecting their NLO behaviors. Therefore, the nonlinearity of the two types of complexes is different after UV irradiation. Density functional theory calculations support this result. The substituted methyl has a significant influence on the nonlinear absorption behaviors of 3 and 4. This work not only reports the examples of photoresponsive NLO materials based on metal complexes but also provides a new idea to deeply explore NLO properties.

Morphological Transitions of a Photoswitchable Aramid Amphiphile Nanostructure

Self-assembly of small amphiphilic molecules in water can lead to nanostructures of varying geometries with pristine internal molecular organization. Here we introduce a photoswitchable aramid amphiphile (AA), designed to exhibit extensive hydrogen bonding and robust mechanical properties upon self-assembly, while containing a vinylnitrile group for photoinduced cis-trans isomerization. We demonstrate spontaneous self-assembly of the vinylnitrile-containing AA in water to form nanoribbons. Upon UV irradiation, trans-to-cis isomerizations occur concomitantly with a morphological transition from nanoribbons to nanotubes. The nanotube structure persists in water for over six months, stabilized by strong and collective intermolecular interactions. We demonstrate that the nanoribbon-to-nanotube transition is reversible upon heating and that switching between states can be achieved repeatedly. Finally, we use electron microscopy to capture the transition and propose mechanisms for nanoribbon-to-nanotube rearrangement and vice versa. The stability and switchability of photoresponsive AA nanostructures make them viable for a range of future applications.

Stimuli-Responsive Supramolecular Chirality Switching and Nanoassembly Constructed by n-Shaped Amphiphilic Molecules in Aqueous Solution

Self-assembled nanomaterials composed of amphiphilic oligomers with functional groups have been applied in the fields of biomimetic chemistry and on-demand delivery systems. Herein, we report the assembly behavior and unique properties of an emergent n-shaped rod-coil molecule containing an azobenzene (AZO) group upon application of an external stimulus (thermal, UV light). The n-shaped amphiphilic molecules comprising an aromatic segment based on anthracene, phenyl linked with azobenzene groups, and hydrophilic oligoether (chiral) segments self-assemble into large strip-like sheets and perforated-nanocage fragments in an aqueous environment, depending on the flexible oligoether chains. Interestingly, the nano-objects formed in aqueous solution undergo a morphological transition from sheets and nanocages to small one-dimensional nanofibers. These molecules exhibit reversible photo- and thermal-responsiveness, accompanied by a change in the supramolecular chirality caused by the conformational transitions of the rod backbone. The architecture of n-shaped amphiphilic molecules with a photosensitive group makes them ideal candidates for intelligent materials for applications in advanced materials science.

A new azobenzene-based design strategy for detergents in membrane protein research

Mass spectrometry enables the in-depth structural elucidation of membrane protein complexes, which is of great interest in structural biology and drug discovery. Recent breakthroughs in this field revealed the need for design rules that allow fine-tuning the properties of detergents in solution and gas phase. Desirable features include protein charge reduction, because it helps to preserve native features of protein complexes during transfer from solution into the vacuum of a mass spectrometer. Addressing this challenge, we here present the first systematic gas-phase study of azobenzene detergents. The utility of gas-phase techniques for monitoring light-driven changes of isomer ratios and molecular properties are investigated in detail. This leads to the first azobenzene detergent that enables the native mass spectrometry analysis of membrane proteins and whose charge-reducing properties can be tuned by irradiation with light. More broadly, the presented work outlines new avenues for the high-throughput characterization of supramolecular systems and opens a new design strategy for detergents in membrane protein research.

Unexpected monolayer-to-bilayer transition of arylazopyrazole surfactants facilitates superior photo-control of fluid interfaces and colloids

Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed n-butyl-arylazopyrazole butyl sulfonate (butyl-AAP-C4S) surfactant that can change its structure at the air-water interface by E/Z photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δγ = 27 mN m-1) and surface excess (ΔΓ > 2.9 μmol m-2) demonstrate superior performance of the butyl-AAP-C4S amphiphile to that of existing ionic surfactants. Neutron reflectometry and vibrational sum-frequency generation spectroscopy reveal that these large changes are caused by an unexpected monolayer-to-bilayer transition. This exceptional behavior is further shown to have dramatic consequences at larger length scales as highlighted by applications like the light-triggered collapse of aqueous foam which is tuned from high (>1 h) to low (<10 min) stabilities and light-actuated particle motion via Marangoni flows.

A metalloprotein-inspired thermo-gene for thermogels

Coordinating hydrogels may act as a thermo-gene to endow heat-melting conventional hydrogels with superior thermal stability at temperatures over 80 °C.

Mechanistic Insights into the Self-Assembly of an Acid-Sensitive Photoresponsive Supramolecular Polymer

The supramolecular polymerization of an acid‐sensitive pyridyl‐based ligand (L₁) bearing a photoresponsive azobenzene moiety was elucidated by mechanistic studies. Addition of trifluoroacetic acid (TFA) led to the transformation of the antiparallel H‐bonded fibers of L₁ in methylcyclohexane into superhelical braid‐like fibers stabilized by H‐bonding of parallel‐stacked monomer units. Interestingly, L₁ dimers held together by unconventional pyridine–TFA N⋅⋅⋅H⋅⋅⋅O bridges represent the main structural elements of the assembly. UV‐light irradiation caused a strain‐driven disassembly and subsequent aggregate reconstruction, which ultimately led to short fibers. The results allowed to understand the mechanism of mutual influence of acid and light stimuli on supramolecular polymerization processes, thus opening up new possibilities to design advanced stimuli‐triggered supramolecular systems.

Dependence of the photo-response behavior of self-assembled 2D Azo-derivatives on the functional groups on a solid surface

Here, by means of scanning tunneling microscopy, we found that 2D self-assembled monolayers of four azobenzene derivatives exhibited different isomerization behaviors when taken from dark to irradiation conditions.

Reversible Photoswitching Function in Atomic/Molecular-Layer-Deposited ZnO:Azobenzene Superlattice Thin Films

We report new types of reversibly photoresponsive ZnO:azobenzene superlattice thin films fabricated through atomic/molecular-layer deposition (ALD/MLD) from diethylzinc, water, and 4,4'-azobenzene dicarboxylic acid precursors. In these ultrathin films, crystalline ZnO layers are interspersed with monomolecular photoactive azobenzene dicarboxylate layers. The thickness of the individual ZnO layers is precisely controlled by the number (m) of ALD cycles applied between two subsequent MLD cycles for the azobenzene layers; in our {[(Zn-O) _m +(Zn-O₂-C-C₆H₄-N=N-C₆H₄-C-O₂)] _n +(Zn-O) _m } samples, m ranges from 0 to 240. The photoresponsive behavior of the films is demonstrated with ultraviolet-visible spectroscopy; all the films are found to be photoreactive upon 360 nm irradiation, the kinetics of the resultant trans-cis photoisomerization somewhat depending on the superlattice structure. The reversibility of the photoisomerization reaction is then confirmed with a subsequent thermal treatment. Our work thus provides proof-of-concept evidence of the suitability of the ALD/MLD technology for the implementation of photoactive moieties such as azobenzene within an inorganic matrix as an attractive new methodology for creating novel light-switchable functional materials.