Aziridinium Lead Iodide: A Stable, Low-Band-Gap Hybrid Halide Perovskite for Photovoltaics

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207 Pb NMR

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D perovskite solar cells. The properties of mixed-halide compositions depend on the local halide distribution, which is challenging to study at the level of single octahedra. In particular, it has been suggested that there is a preference for occupation of the distinct axial and equatorial halide sites in mixed-halide 2D perovskites. 207 Pb NMR can be used to probe the atomic-scale structure of lead-halide materials, but although the isotropic 207 Pb shift is sensitive to halide stoichiometry, it cannot distinguish configurational isomers. Here, we use 2D isotropic-anisotropic correlation 207 Pb NMR and relativistic DFT calculations to distinguish the [PbX6 ] configurations in mixed iodide-bromide 3D FAPb(Br1-x Ix )3 perovskites and 2D BA2 Pb(Br1-x Ix )4 perovskites based on formamidinium (FA+ ) and butylammonium (BA+ ), respectively. We find that iodide preferentially occupies the axial site in BA-based 2D perovskites, which may explain the suppressed halide mobility.

Colloidal Aziridinium Lead Bromide Quantum Dots

The compositional engineering of lead-halide perovskite nanocrystals (NCs) via the A-site cation represents a lever to fine-tune their structural and electronic properties. However, the presently available chemical space remains minimal since, thus far, only three A-site cations have been reported to favor the formation of stable lead-halide perovskite NCs, i.e., Cs+, formamidinium (FA), and methylammonium (MA). Inspired by recent reports on bulk single crystals with aziridinium (AZ) as the A-site cation, we present a facile colloidal synthesis of AZPbBr3 NCs with a narrow size distribution and size tunability down to 4 nm, producing quantum dots (QDs) in the regime of strong quantum confinement. NMR and Raman spectroscopies confirm the stabilization of the AZ cations in the locally distorted cubic structure. AZPbBr3 QDs exhibit bright photoluminescence with quantum efficiencies of up to 80%. Stabilized with cationic and zwitterionic capping ligands, single AZPbBr3 QDs exhibit stable single-photon emission, which is another essential attribute of QDs. In particular, didodecyldimethylammonium bromide and 2-octyldodecyl-phosphoethanolamine ligands afford AZPbBr3 QDs with high spectral stability at both room and cryogenic temperatures, reduced blinking with a characteristic ON fraction larger than 85%, and high single-photon purity (g(2)(0) = 0.1), all comparable to the best-reported values for MAPbBr3 and FAPbBr3 QDs of the same size.

Phase Transitions, Dielectric Response, and Nonlinear Optical Properties of Aziridinium Lead Halide Perovskites

Hybrid organic-inorganic lead halide perovskites are promising candidates for next-generation solar cells, light-emitting diodes, photodetectors, and lasers. The structural, dynamic, and phase-transition properties play a key role in the performance of these materials. In this work, we use a multitechnique experimental (thermal, X-ray diffraction, Raman scattering, dielectric, nonlinear optical) and theoretical (machine-learning force field) approach to map the phase diagrams and obtain information on molecular dynamics and mechanism of the structural phase transitions in novel 3D AZRPbX3 perovskites (AZR = aziridinium; X = Cl, Br, I). Our work reveals that all perovskites undergo order-disorder phase transitions at low temperatures, which significantly affect the structural, dielectric, phonon, and nonlinear optical properties of these compounds. The desirable cubic phases of AZRPbX3 remain stable at lower temperatures (132, 145, and 162 K for I, Br, and Cl) compared to the methylammonium and formamidinium analogues. Similar to other 3D-connected hybrid perovskites, the dielectric response reveals a rather high dielectric permittivity, an important feature for defect tolerance. We further show that AZRPbBr3 and AZRPbI3 exhibit strong nonlinear optical absorption. The high two-photon brightness of AZRPbI3 emission stands out among lead perovskites emitting in the near-infrared region.

Halogen Bond Induced Structural and Photophysical Properties Modification in Organic-Inorganic Hybrid Manganese Halides

The role of halogen bonding in organic-inorganic hybrid (OIH) halides was seldom investigated despite its potential to enhance the stability of the compound. In this context, we have synthesized (2-methylbenzimidazolium)MnCl₃(H₂O)·H₂O (compound 1) crystallizing in a monoclinic space group P2₁/c with a 1D infinite chain of edge shared Mn octahedra. In contrast, the chloro-substituted derivative (5-chloro-2-methylbenzimidazolium)₂MnCl₄ (compound 2) exhibits 0D Mn tetrahedra with a triclinic P1̅ structure. This structural modification from 1D Mn octahedra to 0D Mn tetrahedra involves a unique type-II halogen bonding between organic chlorine (C-Cl) and inorganic chloride (Cl-Mn) ions. Compound 1 exhibits red emission, whereas compound 2 demonstrates dual-band emission, resulting from energy transfer from the organic amine to Mn centers. To rationalize this interesting modulation in structure and photophysical properties, the role of halogen bonding is explored in terms of quantitative electron density analysis and intermolecular interaction energies.

Aziridinium cation templating 3D lead halide hybrid perovskites

This study describes the synthesis of the first aziridinium-based compounds, namely hybrid perovskites (AzrH)PbHal₃ (where AzrH = aziridinium, Hal = Cl, Br or I). This highly reactive species was stabilized in 3D lead halide frameworks and was found to be a small enough organic cation to promote the formation of semiconducting organo-inorganic materials.

1D Perovskitoid as Absorbing Material for Stable Solar Cells

The instabilities of perovskite solar cells hinder their commercialisation. To resolve this problem, a one-dimensional (1D) perovskitoid, PyPbI3, was fabricated, and its structure and photovoltaic performance were investigated in this work. XPS and FTIR results suggest hydrogen bonds existed in the 1D hexagonal PyPbI3. Stability measurements indicate that 1D perovskitoid is much more stable than the commonly employed FA-based perovskite. In addition, solar cells adopting PyPbI3 as an absorbing layer led to a device lifetime of one month. Our results suggest that 1D perovskitoid has great potential to be employed in solar cells.

An Environmentally Stable Organic–Inorganic Hybrid Perovskite Containing Py Cation with Low Trap-State Density

The commonly-employed methylammonium-based perovskites are environmentally unstable, which limits their commercialization. To resolve this problem, a stable hybrid perovskite, pyrrolidinium lead iodide (PyPbI3), was synthesized successfully via a simple drop casting method. The formed PyPbI3 exhibited a hexagonal structure. It presented not only excellent phase stability, but also low trap-state density, as confirmed via the X-ray diffraction and space-charge-limited currents measurements. This novel perovskite may be applicable to perovskite photovoltaics to improve their environmental stability.

Insight into the Improved Phase Stability of CsPbI3 from First-Principles Calculations

The effect of organic cation doping with aziridinium (Az+) on the material properties of CsPbI3 was investigated by applying first-principles calculations. The results showed that the phase stability is greatly improved by incorporating the organic cation Az+ at the A site of CsPbI3. However, the band gap of CsPbI3 is further enlarged from 1.76 to 2.27 eV when 12.5% of Az doping is used. The optical absorption coefficient of Cs0.875Az0.125PbI3 is also decreased in the visible light region. The reasons of the improved phase stability and the enlargement of band gap arising from the organic cation doping are revealed. Our calculated results can provide theoretical guidance for improving the phase stability of halide perovskites.