Durian-Shaped CdS@ZnSe Core@Mesoporous-Shell Nanoparticles for Enhanced and Sustainable Photocatalytic Hydrogen Evolution

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Direct Observation of Z-Scheme Route in Cu31S16/ZnxCd1-xS Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution

Although photocatalytic hydrogen production from water holds great potential as a renewable and sustainable energy alternative, the practical application of the technology demands cost-effective, simple photocatalytic systems with high efficiency in hydrogen evolution reaction (HER). Herein, the synthesis and characterization of Cu31S16/ZnxCd1-xS heterostructured nanoplates (Cu31S16/ZnCdS HNPs) as a high photocatalytic system are reported. The cost-effective, hierarchical structures are easily prepared using the Cu31S16 NPs as the seed by the epitaxial growth of the ZnCdS nanocrystals (NCs). The Cu31S16/ZnCdS without the noble metal cocatalyst exhibits a high HER rate of 61.7 mmol g-1 h-1, which is 8,014 and 17 times higher than that of Cu31S16 and ZnCdS, respectively, under visible light irradiation. The apparent quantum yield (AQY) of Cu31S16/ZnCdS reaches 67.9% at 400 nm with the highest value so far in the reported ZnCdS-based photocatalysts. The excellent activity and stability of the Cu31S16/ZnCdS are attributed to the formation of a strong internal electric field (IEF) and the Z-scheme pathway. The comprehensive experiments and theoretical calculations provide the direct evidences of the Z-scheme route. This work may offer a way for the design and development of efficient photocatalysts to achieve solar-to-chemical energy conversion at a practically useful level.

Photogenerated hole traps in metal-organic-framework photocatalysts for visible-light-driven hydrogen evolution

Efficient electron-hole separation and carrier utilization are key factors in photocatalytic systems. Here, we use a metal-organic framework (NH₂-UiO-66) modified with inner platinum nanoparticles and outer cadmium sulfide (CdS) nanoparticles to construct the ternary composite Pt@NH₂-UiO-66/CdS, which has a spatially separated, hierarchical structure for enhanced visible-light-driven hydrogen evolution. Relative to pure NH₂-UiO-66, Pt@NH₂-UiO-66, and NH₂-UiO-66/CdS samples, the Pt@NH₂-UiO-66/CdS composite exhibits much higher hydrogen yields with an apparent quantum efficiency of 40.3% at 400 nm irradiation and stability over the most MOF-based photocatalysts. Transient absorption measurements reveal spatial charge-separation dynamics in the composites. The catalyst's high activity and durability are attributed to charge separation following an efficient photogenerated hole-transfer band-trap pathway. This work holds promise for enhanced MOF-based photocatalysis using efficient hole-transfer routes.

Composition-dependent activity of ZnxCd1-xSe solid solution coupled with Ni2P nanosheets for visible-light-driven photocatalytic H2 generation

Metal selenide semiconductors have been rarely used for photocatalytic water splitting because of their poor stability and severe photocorrosion properties. Hence, designing stable metal selenides with suitable bandgap energies has considerable practical significance in photocatalytic H₂ evolution. In this work, a novel series of Zn_xCd_1-xSe (x = 0 ∼ 1) with tunable band structure were fabricated through a simple solvothermal method. Impressively, the ZnSe exhibited a maximum H₂ production rate of 1056 µmol g^-1h^-1, which was higher than that of CdSe and Zn_xCd_1-xSe solid solutions. Such visible-light photoactivity for water reduction to H₂ was attained even after 6 cycling photocatalytic experiments. Moreover, the two-dimensional (2D) Ni₂P nanosheets act as a high-efficiency cocatalyst integrated with Zn_xCd_1-xSe semiconductor to boost photocatalytic H₂ generation performance. The optimal 8% Ni₂P/ZnSe composites displayed excellent cycling stability and superior photocatalytic H₂ evolution performance (4336 µmol g^-1h^-1), which was about 4.1 times that of pure ZnSe under visible light irradiation. Photoelectrochemical (PEC), photoluminescence (PL), and time-resolved photoluminescence (TRPL) measurements reveal that the improved photoactivity Ni₂P/ZnSe photocatalysts were ascribed to the effective separation and migration of photoinduced carriers. The present work paves a pathway to explore the fabrication of Zn_xCd_1-xSe solid solutions and the hybridization of 2D transition metal phosphides nanosheets toward photocatalytic applications.

Hierarchical Co0.85 Se-CdSe/MoSe2 /CdSe Sandwich-Like Heterostructured Cages for Efficient Photocatalytic CO2 Reduction

Fabricating efficient photocatalysts with rapid charge carrier separation and high visible light harvesting is an advisable strategy to improve CO₂ reduction performance. Herein, hierarchical Co_0.85 Se-CdSe/MoSe₂ /CdSe cages with sandwich-like heterostructure are prepared to act as efficient photocatalysts for CO₂ reduction. In this study, the structure and composition of the final products can be regulated through the cation-exchange reaction in the presence of ascorbic acid. In the Co_0.85 Se-CdSe/MoSe₂ /CdSe cages, MoSe₂ nanosheets function as a bridge to integrate Co_0.85 Se-CdSe and CdSe on both sides of the MoSe₂ nanosheet shell into a sandwich-like heterostructured catalyst system, which possesses multiple positive merits for photocatalysis, including accelerated transport and separation of photogenerated carriers, improved visible light utilization, and increased catalytic active sites. Thus, the optimized Co_0.85 Se-CdSe/MoSe₂ /CdSe cages exhibit remarkable visible-light photocatalytic performance and outstanding stability for CO₂ reduction with a high CO average yield of 15.04 µmol g^-1 h^-1 and 90.14% selectivity, which are much higher than those of other control samples including single-component catalysts and binary hybrid catalysts. This study provides a promising way for the design and fabrication of high-efficiency photocatalysts.

Metal Cation Valency Dependence in Morphology Evolution of Cu2-x S Nanodisk Seeds and Their Pseudomorphic Cation Exchanges

A crucial parameter in the design of semiconductor nanoparticles (NPs) with controllable optical, magnetic, electronic, and catalytic properties is the morphology. Herein, we demonstrate the potential of additive metal cations with variable valency to direct the morphology evolution of copper-deficient Cu_2-x S nanoparticles in the process of seed-mediated growth. In particular, the djurleite Cu_1.94 S seed could evolve from disk into tetradecahedron in the presence of tin(IV) cations, whereas they merely formed sharp hexagonal nanodisks with tin(II) cations. In addition to djurleite Cu_1.94 S, the tin(IV) cations could be generalized to direct the growth of roxbyite Cu_1.8 S and covellite CuS nanodisk seeds into tetradecahedra. We further perform pseudomorphic cation exchanges of Cu_1.94 S tetradecahedra with Zn²⁺ and Cd²⁺ to produce polyhedral zinc sulfide (ZnS) and cadmium sulfide (CdS) NPs. Moreover, we achieve Cu_1.8 S/ZnS and Cu_1.94 S/CdS tetradecahedral heterostructures via partial cation exchange, which are otherwise inaccessible by traditional synthetic approaches.

Efficient Self-Driving Photoelectrocatalytic Reactor for Synergistic Water Purification and H2 Evolution

The photoelectrocatalytic (PEC) technique has attracted much attention to getting clear energy and environmental purification. Simultaneous reactions of solar energy generation could be used to apply for practical applications to maximize the functionality of reactor systems. Herein, we crafted a self-driving photoelectrocatalytic reactor system, comprising platinum (Pt) modified p-Si nanowires (Pt/Si-NWs) as a photocathode and TiO₂ nanotube arrays (TiO₂-NTAs) as a photoanode for synergistic H₂ evolution and water purification, respectively. Hydrogen evolution in the cathode chamber and environmental remediation in the anode chamber were achieved with the aid of appropriate bandgap illumination and self-built bias voltage. The mismatch of Fermi levels between TiO₂-NTAs and Si-NWs reduced the recombination rates of photoinduced electrons and holes through the formation of Z scheme and inner electric filed. The synergistic PEC reactions exhibited much higher activities than those achieved using other systems so far. This basic principal could be applied for fabricating other PEC reactors in photoelectro conversion devices and be established as design guidelines for reactors to maximize the PEC performance.

Boosting Visible-Light Photocatalytic Redox Reaction by Charge Separation in SnO2 /ZnSe(N2 H4 )0.5 Heterojunction Nanocatalysts

In this work, environmentally friendly photocatalysts with attractive catalytic properties are reported that have been prepared by introducing SnO2 quantum dots (QDs) directly onto ZnSe(N2 H4 )0.5 substrates to induce advantageous charge separation. The SnO2 /ZnSe(N2 H4 )0.5 nanocomposites could be easily synthesized through a one-pot hydrothermal process. Owing to the absence of capping ligands, the attached SnO2 QDs displayed superior photocatalytic properties, generating many exposed reactive surfaces. Moreover, the addition of a specified amount of SnO2 boosted the visible-light photocatalytic activity; however, the presence of excess SnO2 QDs in the substrate resulted in aggregation and deteriorated the performance. The spectroscopic data revealed that the SnO2 QDs act as a photocatalytic mediator and enhance the charge separation within the type II band alignment system of the SnO2 /ZnSe(N2 H4 )0.5 heterojunction photocatalysts. The separated charges in the heterojunction nanocomposites promote radical generation and react with pollutants, resulting in enhanced photocatalytic performance.

Core-shell structured cadmium sulfide nanocomposites for solar energy utilization

Solar energy utilization technologies have been widely explored to solve the global energy crisis because the inexhaustible solar energy can be converted into chemical fuel and electricity. Various semiconductors that are crucial for solar energy utilization have been extensively developed. Among them, cadmium sulfide (CdS) has attracted extensive attention due to its suitable band-gap and excellent electrical/optical properties. However, CdS is still limited by rapid charge recombination, instability and low quantum efficiency. Core-shell structures can provide great opportunities for constructing advanced structures with superior properties to overcome the remaining challenges. This review focuses on the significant advances in core-shell structured CdS nanocomposites for solar energy utilization. Initially, the synthetic methods to construct core-shell structured CdS nanocomposites are reviewed. Then the applications in solar energy utilization are discussed, including photocatalytic\photoelectrochemical water splitting, photocatalytic CO₂ reduction and solar cells. Finally, the perspectives of core-shell structured CdS nanocomposites for solar energy utilization are proposed.

Anomalous Photoinduced Hole Transport in Type I Core/Mesoporous-Shell Nanocrystals for Efficient Photocatalytic H2 Evolution

Controlling the carrier dynamics in a semiconductor nanoparticulate photocatalyst is the key to developing catalytic activity. Generally, type I band alignment is unsuitable for photocatalysts because the photoinduced carriers accumulate in the narrow bandgap semiconductor. To avoid the termination of reactions and/or photocorrosion of materials caused by carrier accumulation, it is common to employ type II band alignment for photoenergy conversion systems instead of type I. However, CdS/ZnS core/mesoporous-shell heterostructures show superior photocatalytic activity despite having type I band alignment that is generally unfavorable for photocatalytic reactions. Transient absorption spectroscopy and time-resolved microwave conductivity revealed efficient photoinduced hole transfer from the CdS phase to the ZnS phase. The defect-mediated hole transfer from the CdS to the ZnS phase resulted in long-lived charge separation (>2.4 ms) leading to high photocatalytic performance. This study provides insight into defect-mediated carrier transfer in nanoparticulate photocatalysts, which could be used as a guideline for the design of highly active and stable nanoparticulate photocatalysts.