Amphiphilically Nanostructured Deep Eutectic Solvents

Nanostructure and Dynamics of the Locally Concentrated Ionic Liquid 2:1 (wt:wt) HMIM FAP:TFTFE and HMIM FAP on Graphite and Gold Electrodes as a Function of Potential

Video-rate atomic force microscopy (AFM) is used to record the near-surface nanostructure and dynamics of one pure ionic liquid (IL), 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIM FAP), and a locally-concentrated IL comprising HMIM FAP with the low viscosity diluent 1,1,2,2-tetrafluoroethyl 2,2,2-trifluoroethyl ether (TFTFE), on highly oriented pyrolytic graphite (HOPG) and Au(111) electrodes as a function of potential. Over the potential range measured (open-circuit potential ± 1 V), different near-surface nanostructures are observed. For pure HMIM FAP, globular aggregates align in rows on HOPG, whereas elongated and worm-like nanostructures form on Au(111). For 2:1 (wt:wt) HMIM FAP:TFTFE, larger and less defined diluent swollen IL aggregates are present on both electrodes. Long-lived near-surface nanostructures for HMIM FAP and the 2:1 (wt:wt) HMIM FAP:TFTFE persist on both electrodes. 2:1 (wt:wt) HMIM FAP:TFTFE mixture diffuses more rapidly than pure HMIM FAP on both electrodes with obviously higher diffusion coefficients on HOPG than on Au(111) due to weaker electrostatic and solvophobic interactions between near-surface aggregates and Stern layer ions. These outcomes provide valuable insights for a wide range of IL applications in interface sciences, including electrolytes, catalysts, lubricants, and sensors.

Computational insight into the effect of alkyl chain length in tetraalkylammonium-based deep eutectic solvents

The effect of the increase in the alkyl chain length of cation on the properties of deep eutectic solvents based on ethylene glycol has been investigated employing classical molecular dynamics simulations. The change in the structural and dynamic properties in both the bulk and liquid-vapor interface is explored through various analyses. The interaction between the anion and the ethylene glycol increases with an increase in the alkyl chain length of the cation, as observed in the increase of the lifetime of the hydrogen bond formed between the two. The terminal carbon atoms are found to be closer to each other when the cation changes from tetraethylammonium to tetrabutylammonium. The cations are located closer to the interface, and the association of the alkyl chains becomes more significant with increased alkyl chain length, decreasing the surface tension values.

Small-Angle X-ray Scattering Study of the Amphiphilic Bulk Nanostructure of Tetraalkylammonium Deep Eutectic Solvents

Deep eutectic solvents (DESs) are low-melting mixtures, often prepared from a salt and a molecular hydrogen bond donor. Like ionic liquids, DESs that contain at least one sufficiently amphiphilic component can form bicontinuous nanostructures consisting of polar and nonpolar domains, although this has not been widely explored for many DES combinations. Here, the bulk nanostructures of DESs comprising tetraalkylammonium bromide salts (tetrabutylammonium bromide, tetraoctylammonium bromide, and methyltrioctylammonium bromide) with alkanols and alkanoic acids of systematically varied chain lengths (C2, C6, C8, and C10) as hydrogen bond donors have been studied. Small-angle X-ray scattering techniques were used to identify the relationship between the alkyl chain length and functionality of the hydrogen bond donor on the nature of the amphiphilic nanostructures formed. These findings demonstrated that the amphiphilic nanostructures of the DESs were not affected by the functional group on the hydrogen bond donor, with these nanostructures influenced primarily by both the absolute and relative alkyl chain lengths of the salt and hydrogen bond donor.

Topical drug delivery strategies for enhancing drug effectiveness by skin barriers, drug delivery systems and individualized dosing

Topical drug delivery is widely used in various diseases because of the advantages of not passing through the gastrointestinal tract, avoiding gastrointestinal irritation and hepatic first-pass effect, and reaching the lesion directly to reduce unnecessary adverse reactions. The skin helps the organism to defend itself against a huge majority of external aggressions and is one of the most important lines of defense of the body. However, the skin's strong barrier ability is also a huge obstacle to the effectiveness of topical medications. Allowing the bioactive, composition in a drug to pass through the stratum corneum barrier as needed to reach the target site is the most essential need for the bioactive, composition to exert its therapeutic effect. The state of the skin barrier, the choice of delivery system for the bioactive, composition, and individualized disease detection and dosing planning influence the effectiveness of topical medications. Nowadays, enhancing transdermal absorption of topically applied drugs is the hottest research area. However, enhancing transdermal absorption of drugs is not the first choice to improve the effectiveness of all drugs. Excessive transdermal absorption enhances topical drug accumulation at non-target sites and the occurrence of adverse reactions. This paper introduces topical drug delivery strategies to improve drug effectiveness from three perspectives: skin barrier, drug delivery system and individualized drug delivery, describes the current status and shortcomings of topical drug research, and provides new directions and ideas for topical drug research.

Evidence for an L3 phase in ternary deep eutectics: composition-induced L3-to-Lα transition of AOT

Pure and hydrated deep eutectic solvents (DES) are proposed to form self-assembled nanostructures within the fluid bulk, similar to the bicontinuous L3 phase common for ionic liquids (ILs). Labelled choline chloride : urea : water DES were measured using small-angle neutron scattering (SANS), showing no long-range nanostructure. However, solutions of the surfactant AOT in this DES yielded scattering consistent with the L3 "sponge" phase, which was fitted using the Teubner-Strey model. A disclike model gave local structural information, namely, a linear increase in radius versus solvent water content (w = molar ratio of DES : water), eventually forming large, turbid lamellar phases at 10w; an L3-to-Lα transition was observed. Simultaneous multi-contrast SANS fits show the surfactant headgroup region is dominated by interactions with poorly-soluble Na+ at low water contents, and numerically-superior [cholinium]+ as water content increases. The modified interfacial Gaussian curvature from cation : anion volume matching stabilizes the lamellar morphology, allowing the bilayer aggregation number to increase.

Bulk nanostructure of a deep eutectic solvent with an amphiphilic hydrogen bond donor

Neutron diffraction with empirical potential structure refinement (EPSR) show the deep eutectic solvent (DES) 1 : 4 choline chloride : butyric acid is amphiphilically nanostructured. Nanostructure results from solvophobic interactions between the alkyl chains of the butyric acid hydrogen bond donor (HBD) and is retained with addition of 10 wt% water. EPSR fits to the diffraction data is used to produce a three-dimensional model of the liquid which is interrogated to reveal the interactions leading to the solvophobic effect, and therefore nanostructure, in this DES at atomic resolution. The model shows electrostatic and hydrogen bond interactions cause the cation, anion and HBD acid group to cluster into a polar domain, from which the acid alkyl chains are solvophobically excluded into theapolar domain. The polar and apolar domains percolate through the liquid in a bicontinuous sponge-like structure. The effect of adding 10 wt% water is probed, revealing that water molecules are sequestered around the cation and anion within the polar domain, while the neat bulk structure is retained. Alkyl chain packing in the apolar domain becomes slightly better-defined indicating water marginally strengthens solvophobic segregation. These findings reveal bulk self-assembled nanostructure can be produced in DESs via an amphiphilic HBD.

Trace Water Changes Metal Ion Speciation in Deep Eutectic Solvents: Ce3+ Solvation and Nanoscale Water Clustering in Choline Chloride-Urea-Water Mixtures

Eutectic mixtures of choline chloride, urea, and water in deep eutectic solvent (DES)/water molar hydration ratios (w) of 2, 5, and 10, with dissolved cerium salt, were measured using neutron diffraction with isotopic substitution. Structures were modeled using empirical potential structure refinement (EPSR). Ce3+ was found to form highly charged complexes with a mean coordination number between 7 and 8, with the shell containing mostly chloride, followed by water. The shell composition is strongly affected by the molar ratio of dilution, as opposed to the mass or volume fraction, due to the high affinity of Cl- and H2O ligands that displace less favorable interactions with ligands such as urea and choline. The presence of Ce3+ salt disrupted the bulk DES structure slightly, making it more electrolyte-like. The measured coordination shell of choline showed significant discrepancies from the statistical noninteracting distribution, highlighting the nonideality of the blend. Cluster analysis revealed the trace presence of percolating water clusters (25 ≥ n ≥ 2) in solvent compositions of 5 and 10w for the first time.

Untapped Potential of Deep Eutectic Solvents for the Synthesis of Bioinspired Inorganic-Organic Materials

Since the discovery of deep eutectic solvents (DESs) in 2003, significant progress has been made in the field, specifically advancing aspects of their preparation and physicochemical characterization. Their low-cost and unique tailored properties are reasons for their growing importance as a sustainable medium for the resource-efficient processing and synthesis of advanced materials. In this paper, the significance of these designer solvents and their beneficial features, in particular with respect to biomimetic materials chemistry, is discussed. Finally, this article explores the unrealized potential and advantageous aspects of DESs, focusing on the development of biomineralization-inspired hybrid materials. It is anticipated that this article can stimulate new concepts and advances providing a reference for breaking down the multidisciplinary borders in the field of bioinspired materials chemistry, especially at the nexus of computation and experiment, and to develop a rigorous materials-by-design paradigm.

Molecular Resolution Nanostructure and Dynamics of the Deep Eutectic Solvent-Graphite Interface as a Function of Potential

Interest in deep eutectic solvents (DESs), particularly for electrochemical applications, has boomed in the past decade because they are more versatile than conventional electrolyte solutions and are low cost, renewable, and non-toxic. The molecular scale lateral nanostructures as a function of potential at the solid-liquid interface-critical design parameters for the use of DESs as electrochemical solvents-are yet to be revealed. In this work, in situ amplitude modulated atomic force microscopy complemented by molecular dynamics simulations is used to probe the Stern and near-surface layers of the archetypal and by far most studied DES, 1:2 choline chloride:urea (reline), at the highly orientated pyrolytic graphite surface as a function of potential, to reveal highly ordered lateral nanostructures with unprecedented molecular resolution. This detail allows identification of choline, chloride, and urea in the Stern layer on graphite, and in some cases their orientations. Images obtained after the potential is switched from negative to positive show the dynamics of the Stern layer response, revealing that several minutes are required to reach equilibrium. These results provide valuable insight into the nanostructure and dynamics of DESs at the solid-liquid interface, with implications for the rational design of DESs for interfacial applications.

How Does Nanostructure in Ionic Liquids and Hybrid Solvents Affect Surfactant Self-Assembly?

Ionic liquids (ILs) have recently emerged as novel classes of solvents that support surfactant self-assembly into micelles, liquid crystals, and microemulsions. Their low volatility and wide liquid stability ranges make them attractive for many diverse applications, especially in extreme environments. However, the number of possible ion combinations makes systematic investigations both challenging and rare; this is further amplified when mixtures are considered, whether with water or other H-bonding components such as those found in deep eutectics. In this Perspective we examine what factors determine amphiphilicity, solvophobicity and solvophilicity, in ILs and related exotic environments, in what ways these differ from water, and how the underlying nanostructure of the liquid itself affects the formation and structure of micelles and other self-assembled materials.

Deep Eutectic Systems as Novel Vehicles for Assisting Drug Transdermal Delivery

In recent years, deep eutectic systems (DES) emerged as novel vehicles for facilitating the transdermal delivery of various drugs, including polysaccharides, proteins, insulin, vaccine, nanoparticles, and herb extracts. The objective of this study is to conduct a comprehensive review of the application of DES to transdermal drug delivery, based on previous work and the reported references. Following a brief overview, the roles of DES in TDDS, the modes of action, as well as the structure-activity relationship of DES are discussed. Particularly, the skin permeation of active macromolecules and rigid nanoparticles, which are the defining characteristics of DES, are extensively discussed. The objective is to provide a comprehensive understanding of the current investigation and development of DES-based transdermal delivery systems, as well as a framework for the construction of novel DES-TDDS in the future.

Microwave-assisted extraction of antioxidant compounds from by-products of Turkish hazelnut (Corylus avellana L.) using natural deep eutectic solvents: Modeling, optimization and phenolic characterization

An environmentally friendly method using natural deep eutectic solvents (NADES) and microwave-assisted extraction (MAE) for the recovery of bioactive compounds from hazelnut pomace (a hazelnut oil process by-product) was developed to contribute to their sustainable valorization. Eight different NADES were prepared for the extraction of antioxidant constituents from hazelnut pomace, and choline chloride:1,2-propylene glycol (CC-PG) was determined as the most suitable NADES, considering their extraction efficiency and physicochemical properties. After selecting suitable NADES, operational parameters for the MAE process of antioxidants from hazelnut pomace were optimized and modeled using response surface methodology. For the highest recovery of antioxidants, the operational parameters of the MAE process were found to be 24% water, 38 min, 92 °C and 18 mL/0.1 g-DS. Under optimized conditions, extracts of both pomace as a by-product and unprocessed hazelnut flours of three different hazelnut samples (Tombul, Çakıldak, and Palaz) were prepared, and their antioxidant capacities were evaluated by spectrophotometric methods. Antioxidant capacities of CC-PG extracts of all hazelnut samples were 2-3 times higher than those of ethanolic extracts. In addition, phenolic characterization of the prepared extracts was carried out using the UPLC-PDA-ESI-MS/MS system. The results of this study suggest that hazelnut by-products can potentially be considered an important and readily available source of natural antioxidants. Furthermore, the modeled MAE procedure has the potential to create an effective and sustainable alternative for pharmaceutical and food industries.

Neutron Diffraction Study of Indole Solvation in Deep Eutectic Systems of Choline Chloride, Malic Acid, and Water

Deep eutectic systems are currently under intense investigation to replace traditional organic solvents in a range of syntheses. Here, indole in choline chloride‐malic acid deep eutectic solvent (DES) was studied as a function of water content, to identify solute interactions with the DES which affect heterocycle reactivity and selectivity, and as a proxy for biomolecule solvation. Empirical Potential Structure Refinement models of neutron diffraction data showed [Cholinium]⁺ cations associate strongly with the indole π‐system due to electrostatics, whereas malic acid is only weakly associated. Trace water is sequestered into the DES and does not interact strongly with indole. When water is added to the DES, it does not interact with the indole π‐system but is exclusively in‐plane with the heterocyclic rings, forming strong H‐bonds with the ‐NH group, and also weak H‐bonds and thus prominent hydrophobic hydration of the indole aromatic region, which could direct selectivity in reactions.

Recent Advances in the Synthesis of Inorganic Materials Using Environmentally Friendly Media

Deep Eutectic Solvents have gained a lot of attention in the last few years because of their vast applicability in a large number of technological processes, the simplicity of their preparation and their high biocompatibility and harmlessness. One of the fields where DES prove to be particularly valuable is the synthesis and modification of inorganic materials-in particular, nanoparticles. In this field, the inherent structural inhomogeneity of DES results in a marked templating effect, which has led to an increasing number of studies focusing on exploiting these new reaction media to prepare nanomaterials. This review aims to provide a summary of the numerous and most recent achievements made in this area, reporting several examples of the newest mixtures obtained by mixing molecules originating from natural feedstocks, as well as linking them to the more consolidated methods that use "classical" DES, such as reline.

Ionic Liquids and Deep Eutectics as a Transformative Platform for the Synthesis of Nanomaterials

Ionic liquids (ILs) are becoming a revolutionary synthesis medium for inorganic nanomaterials, permitting more efficient, safer and environmentally benign preparation of high quality products. A smart combination of ILs and...

Bulk and interfacial nanostructure and properties in deep eutectic solvents: Current perspectives and future directions

Deep eutectic solvents (DESs) are a tailorable class of solvents that are rapidly gaining scientific and industrial interest. This is because they are distinct from conventional molecular solvents, inherently tuneable via careful selection of constituents, and possess many attractive properties for applications, including catalysis, chemical extraction, reaction media, novel lubricants, materials chemistry, and electrochemistry. DESs are a class of solvents composed solely of hydrogen bond donors and acceptors with a melting point lower than the individual components and are often fluidic at room temperature. A unique feature of DESs is that they possess distinct bulk liquid and interfacial nanostructure, which results from intra- and inter-molecular interactions, including coulomb forces, hydrogen bonding, van der Waals interactions, electrostatics, dispersion forces, and apolar-polar segregation. This nanostructure manifests as preferential spatial arrangements of the different species, and exists over several length scales, from molecular- to nano- and meso-scales. The physicochemical properties of DESs are dictated by structure-property relationships; however, there is a significant gap in our understanding of the underlying factors which govern their solvent properties. This is a major limitation of DES-based technologies, as nanostructure can significantly influence physical properties and thus potential applications. This perspective provides an overview of the current state of knowledge of DES nanostructure, both in the bulk liquid and at solid interfaces. We provide definitions which clearly distinguish DESs as a unique solvent class, rather than a subset of ILs. An appraisal of recent work provides hints towards trends in structure-property relationships, while also highlighting inconsistencies within the literature suggesting new research directions for the field. It is hoped that this review will provide insight into DES nanostructure, their potential applications, and development of a robust framework for systematic investigation moving forward.

Structural and dynamical changes observed when transitioning from an ionic liquid to a deep eutectic solvent

The microscopic molecular structure and dynamics of a new deep eutectic solvent (DES) composed of an ionic liquid (1-hexyl-3-methylimidazolium chloride) and an amide (trifluoroacetamide) at various molar ratios were investigated using linear and non-linear infrared spectroscopy with a vibrational probe. The use of the ionic liquid allows us to investigate the changes that the system undergoes with the addition of the amide or, equivalently, the changes from an ionic liquid to a DES. Our studies revealed that the vibrational probe in the DES senses a very similar local environment irrespective of the cation chemical structure. In addition, the amide also appears to perceive the same molecular environment. The concentration dependence studies also showed that the amide changes from being isolated from other amides in the ionic liquid environment to an environment where the amide-amide interactions are favored. In the case of the vibrational probe, the addition of the amide produced significant changes in the slow dynamics associated with the making and breaking of the ionic cages but did not affect the rattling-in-cage motions perceived by it. Furthermore, the concentration dependence of slow dynamics showed two regimes which are linked to the changes in the overall structure of the solution. These observations are interpreted in the context of a nanoscopic heterogeneous environment in the DES which, according to the observed dynamical regimes, appears at very large concentrations of the amide (molar ratio of greater than 1:1) since for lower amide molar ratios, the amide appears to be not segregated from the ionic liquid. This proposed molecular picture is supported by small angle x-ray scattering experiments.

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

The Impact of Water on the Lateral Nanostructure of a Deep Eutectic Solvent–Solid Interface

Deep eutectic solvents (DESs) are tuneable solvents with attractive properties for numerous applications. Their structure–property relationships are still under investigation, especially at the solid–liquid interface. Moreover, the influence of water on interfacial nanostructure must be understood for process optimization. Here, we employ a combination of atomic force microscopy and molecular dynamics simulations to determine the lateral and surface-normal nanostructure of the DES choline chloride:glycerol at the mica interface with different concentrations of water. For the neat DES system, the lateral nanostructure is driven by polar interactions. The surface adsorbed layer forms a distinct rhomboidal symmetry, with a repeat spacing of ~0.9 nm, comprising all DES species. The adsorbed nanostructure remains largely unchanged in 75 mol-% DES compared with pure DES, but at 50 mol-%, the structure is broken and there is a compromise between the native DES and pure water structure. By 25 mol-% DES, the water species dominates the adsorbed liquid layer, leaving very few DES species aggregates at the interface. In contrast, the near-surface surface-normal nanostructure, over a depth of ~3 nm from the surface, remains relatively unchanged down to 25 mol-% DES where the liquid arrangement changed. These results demonstrate not only the significant influence that water has on liquid nanostructure, but also show that there is an asymmetric effect whereby water disrupts the nanostructure to a greater degree closer to the surface. This work provides insight into the complex interactions between DES and water and may enhance their optimization for surface-based applications.

Liquid structure and dynamics in the choline acetate:urea 1:2 deep eutectic solvent

We report on the thermodynamic, structural, and dynamic properties of a recently proposed deep eutectic solvent, formed by choline acetate (ChAc) and urea (U) at the stoichiometric ratio 1:2, hereinafter indicated as ChAc:U. Although the crystalline phase melts at 36-38 °C depending on the heating rate, ChAc:U can be easily supercooled at sub-ambient conditions, thus maintaining at the liquid state, with a glass-liquid transition at about -50 °C. Synchrotron high energy x-ray scattering experiments provide the experimental data for supporting a reverse Monte Carlo analysis to extract structural information at the atomistic level. This exploration of the liquid structure of ChAc:U reveals the major role played by hydrogen bonding in determining interspecies correlations: both acetate and urea are strong hydrogen bond acceptor sites, while both choline hydroxyl and urea act as HB donors. All ChAc:U moieties are involved in mutual interactions, with acetate and urea strongly interacting through hydrogen bonding, while choline being mostly involved in van der Waals mediated interactions. Such a structural situation is mirrored by the dynamic evidences obtained by means of ¹H nuclear magnetic resonance techniques, which show how urea and acetate species experience higher translational activation energy than choline, fingerprinting their stronger commitments into the extended hydrogen bonding network established in ChAc:U.

Tuning the solvation of indigo in aqueous deep eutectics

The solubility of synthetic indigo dye was measured at room temperature in three deep eutectic solvents (DESs)-1:3 choline chloride:1,4-butanediol, 1:3 tetrabutylammonium bromide:1,4-butanediol, and 1:2 choline chloride:p-cresol-to test the hypothesis that the structure of DESs can be systematically altered, to induce specific DES-solute interactions, and, thus, tune solubility. DESs were designed starting from the well-known cholinium chloride salt mixed with the partially amphiphilic 1,4-butanediol hydrogen bond donor (HBD), and then, the effect of increasing salt hydrophobicity (tetrabutylammonium bromide) and HBD hydrophobicity (p-cresol) was explored. Measurements were made between 2.5 and 25 wt. % H₂O, as a reasonable range representing atmospherically absorbed water, and molecular dynamics simulations were used for structural analysis. The choline chloride:1,4-butanediol DES had the lowest indigo solubility, with only the hydrophobic character of the alcohol alkyl spacers. Solubility was highest for indigo in the tetrabutylammonium bromide:1,4-butanediol DES with 2.5 wt. % H₂O due to interactions of indigo with the hydrophobic cation, but further addition of water caused this to reduce in line with the added water mole fraction, as water solvated the cation and reduced the extent of the hydrophobic region. The ChCl:p-cresol DES did not have the highest solubility at 2.5 wt. % H₂O, but did at 25 wt. % H₂O. Radial distribution functions, coordination numbers, and spatial distribution functions demonstrate that this is due to strong indigo-HBD interactions, which allow this system to resist the higher mole fraction of water molecules and retain its solubility. The DES is, therefore, a host to local-composition effects in solvation, where its hydrophobic moieties concentrate around the hydrophobic solute, illustrating the versatility of DES as solvents.

Aqueous choline amino acid deep eutectic solvents

We have investigated the structure and phase behavior of biocompatible, aqueous deep eutectic solvents by combining choline acetate, hydrogen aspartate, and aspartate amino acid salts with water as the sole molecular hydrogen bond donor. Using contrast-variation neutron diffraction, interpreted via computational modeling, we show how the interplay between anion structure and water content affects the hydrogen bond network structure in the liquid, which, in turn, influences the eutectic composition and temperature. These mixtures expand the current range choline amino acid ionic liquids under investigation for biomass processing applications to include higher melting point salts and also explain how the ionic liquids retain their desirable properties in aqueous solution.

Structural Reorganization of Ionic Liquid Electrolyte by a Rapid Charge/Discharge Circle

The behavior of forming layers near the electrode surface is an important topic for the energy storage with ionic liquid (IL) electrolytes. Here, molecular dynamics (MD) simulations were used to study the behavior of surface active ionic liquid (SAIL) electrolytes near positive electrodes. With the increase of electrode surface charge density, a V-type conformation of the anion [AOT]^- for energy storage was shown. The V conformation is easier to replace the latent voids, which is like wedging ions into the layer near the electrodes. Meanwhile, after a rapid charge/discharge circle, there would be more V-type anions appearing in this optimized electrolyte. It is a significant point for the mechanism of nanoscale and microscale energy storage, which provides a theoretical basis for the optimization of efficient IL electrolytes and the design of related experimental research.

Nanostructure of a deep eutectic solvent at solid interfaces

HYPOTHESIS

Deep eutectic solvents (DESs) are an attractive class of tunable solvents. However, their uptake for relevant applications has been limited due to a lack of detailed information on their structure-property relationships, both in the bulk and at interfaces. The lateral nanostructure of the DES-solid interfaces is likely to be more complex than previously reported and requires detailed, high-resolution investigation.

EXPERIMENTS

We employ a combination of high-resolution amplitude-modulated atomic force microscopy and molecular dynamics simulations to elucidate the lateral nanostructure of a DES at the solid-liquid interface. Specifically, the lateral and near-surface nanostructure of the DES choline chloride:glycerol is probed at the mica and highly-ordered pyrolytic graphite interfaces.

FINDINGS

The lateral nanostructure of the DES-solid interface is heterogeneous and well-ordered in both systems. At the mica interface, the DES is strongly ordered via polar interactions. The adsorbed layer has a distinct rhomboidal symmetry with a repeat spacing of ~0.9 nm comprising all DES species. At the highly ordered pyrolytic graphite interface, the adsorbed layer appears distinctly different, forming an apolor-driven row-like structure with a repeat spacing of ~0.6 nm, which largely excludes the chloride ion. The interfacial nanostructure results from a delicate balance of substrate templating, liquid-liquid interactions, species surface affinity, and packing constraints of cations, anions, and molecular components within the DES. For both systems, distinct near-surface nanostructural layering is observed, which becomes more pronounced close to the substrate. The surface nanostructures elucidated here significantly expand our understanding of DES interfacial behavior and will enhance the optimization of DES systems for surface-based applications.

Heterogeneity in hydrophobic deep eutectic solvents: SAXS prepeak and local environments

The observation of the prepeak in the simulated total X-ray scattering structure function (S(q)) reveals the presence of intermediate-range structural heterogeneity in hydrophobic deep eutectic solvents.

Liquid Structure of Single and Mixed Cation Alkylammonium Bromide Urea Deep Eutectic Solvents

The liquid structures of three alkyl ammonium bromide and urea DESs, ethylammonium bromide:urea (1:1), butylammonium bromide:urea (1:1), and ethylammonium bromide/butylammonium bromide:urea (0.5:0.5:1), have been studied using small-angle neutron diffraction with H/D substituted sample contrasts. The diffraction data was fit using empirical potential structure refinement (EPSR). An amphiphilic nanostructure was found in all DESs due to cation alkyl chains being solvophobically excluded from charged domains, and due to clustering together. The polar domain was continuous in all three DESs, whereas the apolar domain was continuous for the butylammonium DES and in the mixed DES, but not the ethylammonium DES. This is attributed to solvophobic interactions being weaker for the short ethyl chain. Surprisingly, the urea also forms large clusters in all three DESs. In ethylammonium bromide:urea (1:1), urea-urea orientations are mainly perpendicular, but in butylammonium bromide:urea (1:1) and the mixed system in-plane and perpendicular arrangements are found. The liquid nanostructures found in this work, especially for the ethylammonium DES, are different from those found previously for the corresponding DESs formed using glycerol, revealing that the DES amphiphilic nanostructure is sensitive to the nature of the HBD (hydrogen bond donor).

Catanionic Surfactant Self-Assembly in Protic Ionic Liquids

Mixing of cationic and anionic surfactants in water can result in pseudo-double-tailed catanionic surfactant ion pairs that form lamellar phases or vesicles that are unstable toward electrolyte addition. Here we show that despite the very high ionic strengths, catanionic surfactants counterintuitively form a wider variety of self-assembled aggregates in pure ionic liquids (ILs, pure salts in a liquid phase) than in water, including micelles, vesicles, and lyotropic phases. Self-assembled structures only form when the IL is sufficiently polar to drive self-assembly through electrostatic interactions and/or H-bond networks, but the catanionic effect is manifested only when the IL does not itself exhibit pronounced amphiphilic nanostructure. This enables the type of catanionic aggregate formed to be designed by changing the hydrogen bonds between the ions through variation of the structures of the cation and anion. These results reveal an entirely new way of controlling catanionic surfactant self-assembly under nonaqueous and high-salt conditions.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

Self-assembled nanostructures in ionic liquids facilitate charge storage at electrified interfaces

Driven by the potential applications of ionic liquids (ILs) in many emerging electrochemical technologies, recent research efforts have been directed at understanding the complex ion ordering in these systems, to uncover novel energy storage mechanisms at IL-electrode interfaces. Here, we discover that surface-active ILs (SAILs), which contain amphiphilic structures inducing self-assembly, exhibit enhanced charge storage performance at electrified surfaces. Unlike conventional non-amphiphilic ILs, for which ion distribution is dominated by Coulombic interactions, SAILs exhibit significant and competing van der Waals interactions owing to the non-polar surfactant tails, leading to unusual interfacial ion distributions. We reveal that, at an intermediate degree of electrode polarization, SAILs display optimum performance, because the low-charge-density alkyl tails are effectively excluded from the electrode surfaces, whereas the formation of non-polar domains along the surface suppresses undesired overscreening effects. This work represents a crucial step towards understanding the unique interfacial behaviour and electrochemical properties of amphiphilic liquid systems showing long-range ordering, and offers insights into the design principles for high-energy-density electrolytes based on spontaneous self-assembly behaviour.

Interaction and Dynamics in a Fully Biodegradable Glucose-Containing Naturally Abundant Deep Eutectic Solvent: Temperature-Dependent Time-Resolved Fluorescence Measurements

A new room-temperature deep eutectic solvent (DES) composed of glucose, urea, and water has been prepared and its relaxation dynamics explored via temperature-dependent time-resolved fluorescence measurements employing hydrophilic and hydrophobic solute probes. Differential scanning calorimetry measurements indicate a glass transition temperature (T_g) of ∼236 K. Measured viscosity coefficients (η) vary from ∼600 to ∼100 cP in the temperature range 318 ≤ T/K ≤ 343 and exhibit Arrhenius-type temperature dependence with an activation energy of ∼65 kJ mol^-1. Interestingly, this DES forms a stable liquid at ∼300 K but is too viscous to be accurately measured by us below 318 K. Temperature-dependent dynamic fluorescence anisotropy measurements using hydrophobic and hydrophilic solutes of similar sizes reveal bi-exponential kinetics and Arrhenius-type temperature dependence for solute rotation times (⟨τ_r⟩) but with significantly decreased activation energies, ∼31 kJ mol^-1 (hydrophobic) and ∼21 kJ mol^-1 (hydrophilic). Deviation from hydrodynamics is further reflected in the strong fractional viscosity dependence of ⟨τ_r⟩: ⟨τ_r⟩ ∝ (η/T)^p with p ≈ 0.3-0.5, indicating pronounced temporal heterogeneity in the relaxation dynamics. Dynamic fluorescence Stokes shift measurements (temporal resolution ∼85 ps) produce dynamic shifts of ∼500-700 cm^-1, bi-exponential solvation energy relaxation with time constants in the range ∼0.2 ns and ∼4 ns, and estimated missing amplitudes of ∼65-75%. Impact of the density difference between a nonpolar solvent and this DES on the estimated missing amplitudes is explored via measuring the temperature-dependent densities and refractive indices of this DES. Lifetime measurements suggest considerable temperature dependence for the hydrophobic solute but no such dependence for the hydrophilic one. Excitation energy dependence of fluorescence emission of various solutes with widely different lifetimes indicates mild spatial heterogeneity for this DES.