Carrier Density-Dependent Localized Surface Plasmon Resonance and Charge Transfer Observed by Controllable Semiconductor Content

Effect of hot electron induced charge transfer generated by surface plasmon resonance on Ag@Au/ITO/PNTP systems

The present study discusses the fabrication of a bimetallic material consisting of silver nanorods and gold nanospheres (designated Ag@Au), and its surface modification with 4-nitrothiophenol (PNTP) after deposition on an indium tin oxide (ITO) glass sheet, followed by laser irradiation at various wavelengths. The results indicate that the reduction of PNTP is more complete under irradiation at 532 nm due to the surface plasmon resonance (SPR) effects of the gold and silver nanomaterials. Moreover, the surface enhanced Raman scattering (SERS) of the PNTP adsorbed on the Ag@Au/ITO is found to be significantly stronger than that of PNTP adsorbed on Ag@Au alone, due to charge transfer (CT) at the interface. In addition, the SERS enhancement effect of the PNTP molecules on the Ag@Au/ITO substrate is optimal under 532 nm laser irradiation due to the hot electron-induced CT generated by the SPR effect. Thus, the system constructed herein combines the effects of SPR and CT, thereby assisting in a further understanding of the enhancement mechanism of SERS and, hence, the further development SERS research in metal-semiconductor-molecular systems.

Development of a MoS2/Ag NP Nanopocket to Trap Target Molecules for Surface-Enhanced Raman Scattering Detection with Long-Term Stability and High Sensitivity

Surface-enhanced Raman scattering (SERS) substrates mostly achieve highly sensitive detection by designing various hot spots; however, how to guide molecules to hot spots and prevent them from leaving has not been thoroughly considered and studied. Here, a composite MoS₂/Ag NP nanopocket detector composed of MoS₂ covered with a Ag NP film was fabricated to develop a general SERS method for actively capturing target molecules into hotspots. A finite element method (FEM) simulation of the multiphysics model was used to analyze the distributions of electric field enhancements and hydrodynamic processes in solution and air of the MoS₂/Ag NP nanopocket. The results revealed that covering MoS₂ slowed the evaporation of the solution, extended the window period for SERS detection, and enhanced the electric field in comparison with the monolayer Ag NP film. Therefore, in the process of dynamic detection, the MoS₂/Ag NP nanopocket can provide an efficient and stable signal within 8 min, increasing the high sensitivity and long-term stability of the SERS method. Furthermore, a MoS₂/Ag NP nanopocket detector was applied to detect antitumor drugs and monitor hypoxanthine structural changes in serum, which demonstrated long-term stability and high sensitivity for SERS analysis. This MoS₂/Ag NP nanopocket detector paves the way for developing the SERS method in various fields.

Amplification-free CRISPR/Cas detection technology: challenges, strategies, and perspectives

Rapid and accurate molecular diagnosis is a prerequisite for precision medicine, food safety, and environmental monitoring. The clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas)-based detection, as a cutting-edged technique, has become an immensely effective tool for molecular diagnosis because of its outstanding advantages including attomolar level sensitivity, sequence-targeted single-base specificity, and rapid turnover time. However, the CRISPR/Cas-based detection methods typically require a pre-amplification step to elevate the concentration of the analyte, which may produce non-specific amplicons, prolong the detection time, and raise the risk of carryover contamination. Hence, various strategies for target amplification-free CRISPR/Cas-based detection have been developed, aiming to minimize the sensitivity loss due to lack of pre-amplification, enable detection for non-nucleic acid targets, and facilitate integration in portable devices. In this review, the current status and challenges of target amplification-free CRISPR/Cas-based detection are first summarized, followed by highlighting the four main strategies to promote the performance of target amplification-free CRISPR/Cas-based technology. Furthermore, we discuss future perspectives that will contribute to developing more efficient amplification-free CRISPR/Cas detection systems.

Evaluation of SERS activity for cosputtered Ag-ZnX@PS (X = O, S, Se) composites: Carrier density dependence

Ag-ZnX (X = O, S, Se) composites coated on polystyrene (PS) arrays (Ag-ZnO@PS, Ag-ZnS@PS, Ag-ZnSe@PS) were successfully fabricated by using cosputtering technology. We found that ZnX doping decreased the carrier densities of these composites compared to that of pure Ag@PS, which was due to redistribution of electrons between Ag and ZnX. Thus, the carrier density of Ag was decreased, and the surface plasmon resonance (SPR) of Ag was redshifted in the Ag-ZnX composites. As the redshift of the SPR of Ag induced a high SPR contribution to the surface-enhanced Raman scattering (SERS), the SPR and charge transfer (CT) contributions were simultaneously increased with increasing carrier density in the Ag-ZnX composites. This study opens a new path to designing metal-semiconductor composites with controllable carrier density. Regulation of the carrier density will be of great help in understanding SPR and CT contributions.

Novel insight into charge transfer regulation based on carrier density-dependent Ag/ITO composite films

Cosputtering technology was utilized to prepare a Ag and indium tin oxide (ITO) composite on a flat polystyrene (PS) microsphere array. The carrier density estimated by Hall effect testing of different Sn concentrations in the cosputtered films can be tuned from 1018 to 1020 cm-3. The bandgap calculated based on ultraviolet photoelectron spectroscopy can be adjusted within the range of 3.95-4.02 eV. We explored the possible mechanism of charge transfer (CT) by varying the bandgap and explained the causes of the surface-enhanced Raman scattering (SERS). Surprisingly, a synchronous change in the CT process with the carrier density was discovered. This observation suggests that the CT process can be precisely regulated by changes in the composition of the metal-semiconductor nanostructures. Our study provides a reference for the application of Ag/ITO films as alternative near-infrared plasmonic materials.

Starch Capped Atomically Thin CuS Nanocrystals for Efficient Photothermal Therapy

Photothermal therapy requires efficient plasmonic nanomaterials with small size, good water dispersibility, and biocompatibility. This work reports a one-pot, 2-min synthesis strategy for ultrathin CuS nanocrystals (NCs) with precisely tunable size and localized surface plasmon resonance (LSPR), where a single-starch-layer coating leads to a high LSPR absorption at the near-IR wavelength 980 nm. The CuS NC diameter increases from 4.7 (1 nm height along [101]) to 28.6 nm (4.9 nm height along [001]) accompanied by LSPR redshift from 978 to 1200 nm, as the precursor ratio decreases from 1 to 0.125. Photothermal temperature increases by 38.6 °C in 50 mg L^-1 CuS NC solution under laser illumination (980 nm, 1.44 W cm^-2 ). Notably, 98.4% of human prostate cancer PC-3/Luc+ cells are killed by as little as 5 mg L^-1 starch-coated CuS NCs with 3-min laser treatment, whereas CuS NCs without starch cause insignificant cell death. LSPR modeling discloses that the starch layer enhances the photothermal effect by significantly increasing the free carrier density and blue-shifting the LSPR toward 980 nm. This study not only presents a new type of photothermally highly efficient ultrathin CuS NCs, but also offers in-depth LSPR modeling investigations useful for other photothermal nanomaterial designs.

Modulating Mechanism of the LSPR and SERS in Ag/ITO Film: Carrier Density Effect

Herein, we fabricated a uniform and dispersible Ag/indium tin oxide (ITO) cosputtered film on a two-dimensional ordered polystyrene template and observed distinct localized surface plasmon resonance (LSPR) properties that can be tuned by changing the doping level. The increase in the optical band gap is due to the variation in the metallic Ag content, which can effectively change the accumulation of free electrons in the conduction band, in addition to the near-IR absorbance. Surface-enhanced Raman scattering (SERS) was used to monitor the variations in the band gap and transfer of electrons, which causes variations in the SERS intensity. The presented research provides new insights into the relationships between the carrier density and maximum absorption wavelength, band gap distribution, and charge transfer process. This is the first study on the influence of the carrier density on the properties of Ag/ITO cosputtered films and suggests practical applications of these films.

In-situ surface-enhanced Raman scattering based on MTi20 nanoflowers: Monitoring and degradation of contaminants

Real-time and in-situ monitoring of chemical reactions has attracted great attention in many fields. In this work, we in-situ monitored the photodegradation reaction process of methylene blue (MB) by Surface enhanced Raman scattering (SERS) technique. An effective and versatile SERS platform assembled from MoS₂ nanoflowers (NFs) and TiO₂ nanoparticles (NPs) was prepared successfully. The optimized MoS₂/TiO₂ substrate (MTi₂₀) exhibits not only an ultra-high SERS response but also the excellent catalytic degradation performance to the contaminant MB, which provided a new material for real-time and in-situ monitoring the photodegradation process. Experiments prove that the detection limit is as low as 10^-13 M, and degradation rate is as high as 97.2% in 180 s, respectively. And the activity of the substrate kept in the air for 90 days is almost unchanged. Furthermore, as a practical SERS substrate, MTi₂₀ can also detect trace amounts of other harmful substances including malachite green (MG), bisphenol A (BPA) and endosulfan. Thus, this study come up with a new orientation at the real-time and in-situ monitoring of photocatalytic reaction and may be applied in environmental monitoring and food security fields in the future.

Surface plasmon resonance induced charge transfer effect on the Ag-ZnSe-PATP system

This work demonstrated the effect of charge transfer (CT) induced by metal surface plasmon resonance (SPR) on surface-enhanced Raman scattering (SERS). We designed an Ag-ZnSe nanostructure and introduced p-aminothiophenol (PATP) molecules to form an Ag-ZnSe-PATP system. The proposed method compensates for the CT difficulty in wide-band-gap semiconductors, which was initiated by the SPR of Ag. The Raman intensity is enhanced differently depending on the action of excitation light of different wavelengths. The concept of the CT degree was introduced to analyze this intriguing phenomenon. The system constructed in this work combines the electromagnetic enhancement mechanism and the chemical enhancement mechanism, which helps further understand the SERS mechanism and provides important references for SERS research on wide-band-gap semiconductors.

New insight into SPR modulating by two-dimensional correlation spectroscopy: the case for an Ag/ITO system

The localized surface plasmon resonance (LSPR) of Ag/indium tin oxide (ITO)@polystyrene (PS) in the visible-NIR region was dependent on the tuning of the carrier density caused by adjusting the thickness of the ITO layer. The two-dimensional correlation spectroscopy (2D-COS) results of the dependence of each component in the UV-vis-NIR spectrum on the carrier density response enabled the successful exploration of the carrier transport process.

Probing the charge-transfer of Ag/PEDOT:PSS/4-MBA by surface-enhanced raman scattering

A metal-organic semiconductor-molecule model was developed with Ag nanoparticles (NPs), poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and 4-mercaptobenzoic acid (4-MBA) via the layer-by-layer self-assembly method. In the SERS spectrum of the Ag/PEDOT:PSS/4-MBA system, structural changes in the PEDOT chain were discovered, which provides a deeper understanding of the charge transfer (CT) mechanism in SERS and helps in the development of a method to construct metal-organic semiconductor SERS substrates. A quantitative calculation of the degree of charge transfer (ρCT(κ)) determines the CT contribution of PEDOT:PSS to the SERS intensity of the Ag/PEDOT:PSS/4-MBA system. On this basis, we propose the formation of a resonance complex between Ag NPs and PEDOT:PSS to explore the CT mechanism, which is beneficial for studying interface CT and for understanding the CT mechanism in SERS. The introduction of organic semiconductors in this study not only broadens the research scope of SERS substrates but also contributes to the exploration of SERS mechanisms.

Damping resonance and refractive index effect on the layer-by-layer sputtering of Ag and Al2O3 on the polystyrene template

In this study, an ordered metal oxide-metal composite system was designed. By changing the thickness of film of Ag/Al₂O₃ nanoparticles (NPs), the red and blue shifts of local surface plasma resonance (LSPR) were realized in the proposed system and discussed by damping resonance theory and Mie's scattering theory to demonstrating the relationship between wavelength (λ) and particle diameter (D). With the increasing of sputtering time of Ag, the SPR of Ag was red shifted under the influence of damped vibration, obtaining that square of wavelength (λ²) is proportional to D. The surface plasma resonance (SPR) of Ag/Al₂O₃ showed an obvious blue shift, and then red shift suddenly, which is affected by the competition between damping resonance and refractive index. When the blue shift occurs, the change of wavelength (∆λ) is exponentially related to the diameter (D). The modulation of LSPR of the proposed composite nano-metal materials will have a potential application in SPR sensor and surface enhanced Raman scattering (SERS).

Improved Charge Transfer Contribution by Cosputtering Ag and ZnO

A two-dimensional polystyrene microsphere array cosputtered with Ag and ZnO was designed for evaluating surface-enhanced Raman scattering (SERS) activity. The surface plasmon resonance (SPR) and SERS properties were significantly changed by the introduction of ZnO into the Ag film. By increasing the Ag sputtering power, a redshift of the SPR peak was obtained. Moreover, improved SERS activity occurred because of the electromagnetic (EM) contribution from the increasing Ag content and the charge transfer (CT) contribution from the introduction of ZnO. More importantly, the Hall effect was employed to evaluate the carrier density effect on the SERS contribution of the Ag/ZnO film. The increase in the carrier density as the Ag sputtering power increased indicated an increasing number of free electrons stored in the Ag/ZnO film, which was accompanied by improved EM and CT contributions.

Detect, remove and re-use: Sensing and degradation pesticides via 3D tilted ZMRs/Ag arrays

The objective of this study was to design a versatile and reusable pesticide detection surface-enhanced Raman scattering (SERS) substrate in combination with SERS enhancement and self-cleaning properties. In this paper, we present an inexpensive way to synthesize three-dimensional tilted ZnO micron rods with an Ag hierarchical structure (ZMRs/Ag arrays). Although expensive materials and complex methods were not used, the detection limit of thiram residue was 10^-11 M, with a quantitative relationship (R² = 0.9929) between the thiram concentration and the intensity of the SERS peaks. Additionally, the substrates exhibited fast and efficient photocatalytic activity for the degradation of adsorbed thiram, and the degradation rate in 30 min was close 100 % under visible-light irradiation. The enhancement and photocatalytic mechanism of this substrate were meticulously analyzed in detail. Furthermore, the residues of several mixed pesticides (e.g., thiram and methamidophos compounds) in various juices (such as grape, pear, orange, apple, and cherry juices) were quickly detected using ZMRs/Ag substrates. The main advantages of this substrate are recyclability, stability, selectivity, handiness, and cost-eff ;ectiveness. The substrate can prevent single-use problems associated with conventional SERS substrates and can be applied in pesticide residue and food security.

Plasmonic Molybdenum Tungsten Oxide Hybrid with Surface-Enhanced Raman Scattering Comparable to that of Noble Metals

The surface-enhanced Raman scattering (SERS) research is in full swing owing to its high sensitivity and high selectivity; however, the substrates with superexcellent performance for SERS are largely confined to noble metals (Au, Ag, etc.). Although the SERS active substrates have been extended to semiconductors and transition metals, it is frustrating that their sensitivities are insufficient for widespread practical application. Here, we report the plasmonic molybdenum tungsten oxide (MWO) hybrid nanomaterials (NMs), which can be used as high-performance substrates with SERS comparable to that of noble metals. MWO NMs can achieve the trace detection of rhodamine 6G (R6G), basic fuchsin (BF), and oil red O (ORO). The detection limit concentration for R6G is 10^-8 M, with the maximum enhancement factor of up to 6.09 × 10⁷. The superexcellent SERS performance was attributed to the cooperative enhancement effect of electromagnetic (EM) enhancement mechanism and the charge transfer (CT) mechanism. Moreover, in the proposed system, the EM and CT contribution was distinguished by employing poly(vinylpyrrolidone) (PVP), which serves as a barrier layer to prevent the CT process from MWO NMs to R6G. These remarkable MWO NMs can be obtained with a facile method, and this research provides new insight into non-noble metal based SERS substrate.

Carrier dynamic monitoring of a π-conjugated polymer: a surface-enhanced Raman scattering method

Here, the carrier dynamics of a π-conjugated polymer is monitored by voltage-dependent surface-enhanced Raman scattering (SERS). The conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is employed as a metal-free SERS substrate. Under different voltage conditions, the SERS performance of the semiconductors' rectification characteristic is discussed. Our results open an unprecedented regime for conducting polymer-based SERS.

Control of Charge Carrier Dynamics in Plasmonic Au Films by TiOx Substrate Stoichiometry

Plasmonic excitations in noble metals have many fascinating properties and give rise to a broad range of applications. We demonstrate, using nonadiabatic molecular dynamics combined with time-domain density functional theory, that the chemical composition and stoichiometry of substrates can have a strong influence on charge dynamics. By changing oxygen content in TiO₂, including stoichiometric, oxygen rich, and oxygen poor phases, and Ti metal, one can alter lifetimes of charge carriers in Au by a factor of 5 and control the ratio of electron-to-hole relaxation rates by a factor of 10. Remarkably, a thin TiO_x substrate greatly alters charge carrier properties in much thicker Au films. Such large variations stem from the fact that the Ti and O atoms are much lighter than Au, and their vibrations are much faster at dissipating the energy. The control over a particular charge carrier and an energy range depends on the Au and TiO_x level alignment, and the interfacial interaction strength. These factors are easily influenced by the TiO_x stoichiometry. In particular, oxygen rich and poor TiO₂ can be used to control holes and electrons, respectively, while metallic Ti affects both charge carriers. The detailed atomistic analysis of the interfacial and electron-vibrational interactions generates the fundamental understanding of the properties of plasmonic materials needed to design photovoltaic, photocatalytic, optoelectronic, sensing, nanomedical, and other devices.

Recent Development of SERS Technology: Semiconductor-Based Study

As a new analytical technology, surface-enhanced Raman scattering (SERS) has received increasing attention, and researchers have discovered the importance of SERS-active materials. Considerable effort has been made by researchers to develop multiperformance and multipurpose SERS-active substrates ranging from coinage metals to transition metals and semiconductor materials. SERS-active substrates are critical for obtaining accurate and reproducible spectral information. Among all the substrate materials, semiconductors are considered one of the most promising materials, as they exhibit high chemical stability, good biocompatibility, high carrier mobility, and good controllability during fabrication. Here, we provide an overview of SERS enhancement mechanisms based on semiconductor materials, such as inorganic semiconductors, metal/semiconductor composites, and organic semiconductors.

Facile synthesis of Fe3O4@Au core-shell nanocomposite as a recyclable magnetic surface enhanced Raman scattering substrate for thiram detection

The Fe₃O₄@Au core-shell nanocomposites, as the multifunctional magnetic surface enhanced Raman scattering (SERS) substrates, were fabricated successfully by the seeds growth method based on the Fe₃O₄-Au core-satellite nanocomposites. The SERS properties of the Fe₃O₄-Au core-satellite nanocomposites and the Fe₃O₄@Au core-shell nanocomposites were compared using 4-aminothiophenol (4-ATP) as the probe molecule. It was found that Fe₃O₄@Au core-shell nanocomposites showed better SERS performance than Fe₃O₄-Au core-satellite nanocomposites. The Au shell provided an effectively large surface area for forming sufficient plasmonic hot spots and capturing target molecules. The integration of magnetic core and plasmonic Au nanocrystals endowed the Fe₃O₄@Au core-shell nanocomposites with highly efficient magnetic separation and enrichment ability and abundant interparticle hot spots. The Fe₃O₄@Au core-shell nanocomposites could be easily recycled because of the intrinsic magnetism of the Fe₃O₄ cores and had good reproducibility of the SERS signals. For practical application, the Fe₃O₄@Au core-shell nanocomposites were also used to detect thiram. There was a good linear relationship between the SERS signal intensity and the concentration of thiram from 1 × 10^-3 to 1 × 10^-8 M and the limit of detection was 7.69 × 10^-9 M. Moreover, residual thiram on apple peel was extracted and detected with a recovery rate range of 99.3%. The resulting substrate with high SERS activity, stability and strong magnetic responsivity makes the Fe₃O₄@Au core-shell nanocomposites a perfect choice for practical SERS detection applications.

Plasmon-coupled Charge Transfer in FSZA Core-shell Microspheres with High SERS Activity and Pesticide Detection

A commercial SERS substrate does not only require strong enhancement, but also can be reused and recycled in actual application. Herein, Fe₃O₄/SiO₂/ZnO/Ag (FSZA) have been synthesised, which consisted of Fe₃O₄ core with strong magnetic field response and an intermediate SiO₂ layer as an electronic barrier to keep the stability of magnetite particles and outer ZnO and Ag as the effective layers for detecting pollutants. The SERS enhancement factor (EF) of the FSZA was ~8.2 × 10⁵. The enhancement mechanism of the FSZA core-shell microspheres were anatomized. The electromagnetic enhancement of surface deposited Ag, charge transfer, and molecular and exciton resonances act together to cause such high enhancement factors. For practical application, the FSZA core-shell microspheres were also used to detect thiram, moreover, which was collected and separated by an external magnetic field, and maintained the SERS activity without significant decline during multiple tests. So the good enhancement performance and magnetic recyclability make the FSZA core-shell microspheres a promising candidates for practical SERS detection applications.