A Heterogeneous Kinetics Model for Triplet Exciton Transfer in Solid-State Upconversion

Bulk Heterojunction Upconversion Thin Films Fabricated via One-Step Solution Deposition

Upconversion of near-infrared light into the visible has achieved limited success in applications due to the difficulty of creating solid-state films with high external quantum efficiency (EQE). Recent developments have expanded the range of relevant materials for solid-state triplet-triplet annihilation upconversion through the use of a charge-transfer state sensitization process. Here, we report the single-step solution-processed deposition of a bulk heterojunction upconversion film using organic semiconductors. The use of a bulk heterojunction thin film enables a high contact area between sensitizer and annihilator materials in this interface-triplet-generation mechanism and allows for a facile single-step deposition process. Demonstrations of multiple deposition and patterning methods on glass and flexible substrates show the promise of this materials system for solid-state upconversion applications.

Generating spin-triplet states at the bulk perovskite/organic interface for photon upconversion

Perovskite-sensitized triplet-triplet annihilation (TTA) upconversion (UC) holds potential for practical applications of solid-state UC ranging from photovoltaics to sensing and imaging technologies. As the triplet sensitizer, the underlying perovskite properties heavily influence the generation of spin-triplet states once interfaced with the organic annihilator molecule, typically polyacene derivatives. Presently, most reported perovskite TTA-UC systems have utilized rubrene doped with ∼1% dibenzotetraphenylperiflanthene (RubDBP) as the annihilator/emitter species. However, practical applications require a larger apparent anti-Stokes than is currently achievable with this system due to the inherent 0.4 eV energy loss during triplet generation. In this minireview, we present the current understanding of the triplet sensitization process at the perovskite/organic semiconductor interface and introduce additional promising annihilators based on anthracene derivatives into the discussion of future directions in perovskite-sensitized TTA-UC.

Recharging upconversion: revealing rubrene's replacement

One of the major limitations of solid-state perovskite-sensitized photon upconversion to date is that the only annihilator successfully paired with the perovskite sensitizer has been rubrene, raising the question of whether this appraoch of triplet sensitization is universal or limited in scope. Additionally, the inherent energetic mismatch between the perovskite bandgap and the rubrene triplet energy has restricted the apparent anti-Stokes shift achievable in the upconversion process. To increase the apparent anti-Stokes shift for upconversion processes, anthracene derivates are of particular interest due to their higher triplet energies. Here, we demonstrate successful sensitization of the triplet state of 1-chloro-9,10-bis(phenylethynyl)anthracene using the established formamidinium methylammonium lead triiodide perovskite FA_0.85MA_0.15PbI₃, resulting in upconverted emission at 550 nm under 780 nm excitation. We draw a direct comparison to rubrene to unravel the underlying differences in the upconversion processes.

Efficient solid-state infrared-to-visible photon upconversion on atomically thin monolayer semiconductors

Upconverting infrared light into visible light via the triplet-triplet annihilation process in solid state is important for various applications including photovoltaics, photodetection, and bioimaging. Although inorganic semiconductors with broad absorption and negligible exchange energy loss have emerged as promising alternative to molecular sensitizers, currently, they have exclusively suffered from low efficiency and contained toxic elements in near-infrared (NIR)-to-visible upconversion. Here, we report an ultrathin bilayer film for NIR-to-visible upconversion based on atomically thin two-dimensional (2D) monolayer semiconductors. The atomic flatness and strong light absorption of 2D monolayer semiconductors enable ultrafast energy transfer and robust NIR-to-visible emission with a high upconversion quantum yield (1.1 ± 0.2%) at modest incident power (260 mW cm^-2). Increasing layer thickness adversely quenches the upconversion emission, highlighting the 2D advantage. Considering the whole library of 2D semiconductors, the facile large-scale production and the ultrathin solid-state architecture open a new research field for solid-state upconversion applications.

A Sensitizer of Purpose: Generating Triplet Excitons with Semiconductor Nanocrystals

The process of photon upconversion promises importance for many optoelectronic applications, as it can result in higher efficiencies and more effective photon management. Upconversion via triplet-triplet annihilation (TTA) occurs at low incident powers and at high efficiencies, requirements for integration into existing optoelectronic devices. Semiconductor nanocrystals are a diverse class of triplet sensitizers with advantages over traditional molecular sensitizers such as energetic tunability and minimal energy loss during the triplet sensitization process. In this Perspective, we review current progress in semiconductor nanocrystal triplet sensitization, specifically focusing on the nanocrystal, the ligand shell which surrounds the nanocrystal, and progress in solid-state sensitization. Finally, we discuss potential areas of improvement which could result in more efficient upconversion systems sensitized by semiconductor nanocrystals. Specifically, we focus on the development of solid-state TTA upconversion systems, elucidation of the energy transfer mechanisms from nanocrystal to transmitter ligand which underpin the upconversion process and propose novel configurations of nanocrystal-sensitized systems.

Triplet-triplet annihilation upconversion with reversible emission-tunability induced by chemical-stimuli: a remote modulator for photocontrol isomerization

Triplet-triplet annihilation upconversion (TTA-UC) has been widely studied, but a color-tunable TTA-UC system triggered by chemical stimuli has not yet been proposed. Herein, reversible acid/base switching of the TTA-UC emission wavelength is achieved for the first time by a simple platform, composed of a direct singlet-triplet (S₀-T₁) absorption photosensitizer, and proton-responsive 9,10-di(pyridin-4-yl)anthracene (DPyA) as an acceptor. The photosensitizer-acceptor pair exhibits efficient UC emission (quantum yield up to 3.3%, and anti-Stokes shift up to 0.92 eV) with remarkable contrast upon base/acid treatment (Δλ_em,max = 82 nm, 0.46 eV). In a proof-of-concept study, the color-adjustable TTA-UC emission was applied as a remote modulator to photo-control reversible chemical reactions for the first time. This platform enriches the portfolio of color-switchable TTA-UC, and the mechanism would inspire further development of smart UC systems and extend the application field of upconversion.

Nanocrystal-Sensitized Infrared-to-Visible Upconversion in a Microcavity under Subsolar Flux

Infrared-to-visible photon upconversion could benefit applications such as photovoltaics, infrared sensing, and bioimaging. Solid-state upconversion based on triplet exciton annihilation sensitized by nanocrystals is one of the most promising approaches, albeit limited by relatively weak optical absorption. Here, we integrate the upconverting layers into a Fabry-Pérot microcavity with quality factor Q = 75. At the resonant wavelength λ = 980 nm, absorption increases 74-fold and we observe a 227-fold increase in the intensity of upconverted emission. The threshold excitation intensity is reduced by 2 orders of magnitude to a subsolar flux of 13 mW/cm². We measure an external quantum efficiency of 0.06 ± 0.01% and a 2.2-fold increase in the generation yield of upconverted photons. Our work highlights the potential of triplet-triplet annihilation-based upconversion in low-intensity sensing applications and demonstrates the importance of photonic designs in addition to materials engineering to improve the efficiency of solid-state upconversion.

Spectroscopy of Resonant Intermediate States for Triplet-Triplet Annihilation Upconversion in Crystalline Rubrene: Radical Ions as Sensitizers

Photoluminescence upconversion in crystalline rubrene can proceed without an added sensitizer, but the mechanism for this process has not been well-understood. In particular, the species responsible for photon absorption has not been identified to date. To gain insight into the identity of the intermediate state, we measured the near-infrared (NIR) upconversion photoluminescence (UCPL) excitation spectrum of rubrene crystals and found three distinct spectral features. The UCPL yield has a quartic dependence on the laser intensity, implying a four-photon process. On the basis of electronic spectra of radical cations and anions of rubrene, we propose a mechanism in which photoexcited radical anions and cations undergo recombination, forming an excited neutral triplet while conserving spin. The triplets formed this way ultimately undergo triplet-triplet annihilation, resulting in the observed photoluminescence. This mechanism explains the origin of the NIR absorption as well as the four-photon nature of the UCPL process.

Engineering 3D perovskites for photon interconversion applications

In this review, we highlight the current advancements in the field of triplet sensitization by three-dimensional (3D) perovskite nanocrystals and bulk films. First introduced in 2017, 3D perovskite sensitized upconversion (UC) is a young fast-evolving field due to the tunability of the underlying perovskite material. By tuning the perovskite bandgap, visible-to-ultraviolet, near-infrared-to-visible or green-to-blue UC has been realized, which depicts the broad applicability of this material. As this research field is still in its infancy, we hope to stimulate the field by highlighting the advantages of these perovskite nanocrystals and bulk films, as well as shedding light onto the current drawbacks. In particular, the keywords toxicity, reproducibility and stability must be addressed prior to commercialization of the technology. If successful, photon interconversion is a means to increase the achievable efficiency of photovoltaic cells beyond its current limits by increasing the window of useable wavelengths.

Impact of t-butyl substitution in a rubrene emitter for solid state NIR-to-visible photon upconversion

Solid state NIR-to-visible photon upconversion (UC) mediated by triplet-triplet annihilation (TTA) is necessitated by numerous practical applications. Yet, efficient TTA-UC remains a highly challenging task. In this work palladium phthalocyanine-sensitized NIR-to-vis solid UC films based on a popular rubrene emitter are thoroughly studied with the primary focus on revealing the impact of t-butyl substitution in rubrene on the TTA-UC performance. The solution-processed UC films were additionally doped with a small amount of emissive singlet sink tetraphenyldibenzoperiflanthene (DBP) for collecting upconverted singlets from rubrene and in this way diminishing detrimental singlet fission. Irrespective of the excitation conditions used, t-butyl-substituted rubrene (TBR) was found to exhibit enhanced TTA-UC performance as compared to that of rubrene at an optimal emitter doping of 80 wt% in polystyrene films. Explicitly, in the TTA dominated regime attained at high excitation densities, 4-fold higher UC quantum yield (ΦUC) achieved in TBR-based films was caused by the reduced fluorescence concentration quenching mainly due to suppressed singlet fission. Under low light conditions, i.e. in the regime governed by spontaneous triplet decay, even though triplet exciton diffusion was obstructed in TBR films by t-butyl moieties, the subsequently reduced TTA rate was counterbalanced by both suppressed singlet fission and non-radiative triplet quenching, still ensuring higher ΦUC of these films as compared to those of unsubstituted rubrene films.

Influence of Triplet Diffusion on Lead Halide Perovskite-Sensitized Solid-State Upconversion

The emerging field of lead halide perovskite-sensitized triplet-triplet annihilation (TTA) in rubrene shows great promise in upconversion applications. By rapidly transferring single charge carriers instead of bound triplet states, perovskites enable a high triplet population in rubrene, yielding low I_th values. In this contribution, we investigate the role of the triplet population on the upconverted emission. Interestingly, two independent rates of TTA can be observed, as well as a sharp drop in the visible emission intensity over several seconds. This effect can be attributed to the triplet-density-based diffusion length: (i) at low triplet populations slow diffusion-mediated TTA yields singlets far from the interface and (ii) higher triplet populations lead to rapid TTA close to the perovskite/rubrene interface. Because of the proximity of the strongly absorbing perovskite, the singlet states created closer to the interface undergo stronger back-transfer to the perovskite film and therefore appear to exhibit a lower photoluminescence quantum yield.