Variational Formulation of the Generalized Many-Body Expansion with Self-Consistent Charge Embedding: Simple and Correct Analytic Energy Gradient for Fragment-Based ab Initio Molecular Dynamics

Fragment-Based Deep Learning for Simultaneous Prediction of Polarizabilities and NMR Shieldings of Macromolecules and Their Aggregates

Simultaneous prediction of the molecular response properties, such as polarizability and the NMR shielding constant, at a low computational cost is an unresolved issue. We propose to combine a linear-scaling generalized energy-based fragmentation (GEBF) method and deep learning (DL) with both molecular and atomic information-theoretic approach (ITA) quantities as effective descriptors. In GEBF, the total molecular polarizability can be assembled as a linear combination of the corresponding quantities calculated from a set of small embedded subsystems in GEBF. In the new GEBF-DL(ITA) protocol, one can predict subsystem polarizabilities based on the corresponding molecular wave function (thus electron density and ITA quantities) and DL model rather than calculate them from the computationally intensive coupled-perturbed Hartree-Fock or Kohn-Sham equations and finally obtain the total molecular polarizability via a linear combination equation. As a proof-of-concept application, we predict the molecular polarizabilities of large proteins and protein aggregates. GEBF-DL(ITA) is shown to be as accurate enough as GEBF, with mean absolute percentage error <1%. For the largest protein aggregate (>4000 atoms), GEBF-DL(ITA) gains a speedup ratio of 3 compared with GEBF. It is anticipated that when more advanced electronic structure methods are used, this advantage will be more appealing. Moreover, one can also predict the NMR chemical shieldings of proteins with reasonably good accuracy. Overall, the cost-efficient GEBF-DL(ITA) protocol should be a robust theoretical tool for simultaneously predicting polarizabilities and NMR shieldings of large systems.

Scalable generalized screening for high-order terms in the many-body expansion: Algorithm, open-source implementation, and demonstration

The many-body expansion lies at the heart of numerous fragment-based methods that are intended to sidestep the nonlinear scaling of ab initio quantum chemistry, making electronic structure calculations feasible in large systems. In principle, inclusion of higher-order n-body terms ought to improve the accuracy in a controllable way, but unfavorable combinatorics often defeats this in practice and applications with n ≥ 4 are rare. Here, we outline an algorithm to overcome this combinatorial bottleneck, based on a bottom-up approach to energy-based screening. This is implemented within a new open-source software application ("Fragme∩t"), which is integrated with a lightweight semi-empirical method that is used to cull subsystems, attenuating the combinatorial growth of higher-order terms in the graph that is used to manage the calculations. This facilitates applications of unprecedented size, and we report four-body calculations in (H2O)64 clusters that afford relative energies within 0.1 kcal/mol/monomer of the supersystem result using less than 10% of the unique subsystems. We also report n-body calculations in (H2O)20 clusters up to n = 8, at which point the expansion terminates naturally due to screening. These are the largest n-body calculations reported to date using ab initio electronic structure theory, and they confirm that high-order n-body terms are mostly artifacts of basis-set superposition error.

Fragment-Based Calculations of Enzymatic Thermochemistry Require Dielectric Boundary Conditions

Electronic structure calculations on enzymes require hundreds of atoms to obtain converged results, but fragment-based approximations offer a cost-effective solution. We present calculations on enzyme models containing 500-600 atoms using the many-body expansion, comparing to benchmarks in which the entire enzyme-substrate complex is described at the same level of density functional theory. When the amino acid fragments contain ionic side chains, the many-body expansion oscillates under vacuum boundary conditions but rapid convergence is restored using low-dielectric boundary conditions. This implies that full-system calculations in the gas phase are inappropriate benchmarks for assessing errors in fragment-based approximations. A three-body protocol retains sub-kilocalorie per mole fidelity with respect to a supersystem calculation, as does a two-body calculation combined with a full-system correction at a low-cost level of theory. These protocols pave the way for application of high-level quantum chemistry to large systems via rigorous, ab initio treatment of many-body polarization.

Extending multi-layer energy-based fragment method for excited-state calculations of large covalently bonded fragment systems

Recently, we developed a low-scaling Multi-Layer Energy-Based Fragment (MLEBF) method for accurate excited-state calculations and nonadiabatic dynamics simulations of nonbonded fragment systems. In this work, we extend the MLEBF method to treat covalently bonded fragment ones. The main idea is cutting a target system into many fragments according to chemical properties. Fragments with dangling bonds are first saturated by chemical groups; then, saturated fragments, together with the original fragments without dangling bonds, are grouped into different layers. The accurate total energy expression is formulated with the many-body energy expansion theory, in combination with the inclusion-exclusion principle that is used to delete the contribution of chemical groups introduced to saturate dangling bonds. Specifically, in a two-layer MLEBF model, the photochemically active and inert layers are calculated with high-level and efficient electronic structure methods, respectively. Intralayer and interlayer energies can be truncated at the two- or three-body interaction level. Subsequently, through several systems, including neutral and charged covalently bonded fragment systems, we demonstrate that MLEBF can provide accurate ground- and excited-state energies and gradients. Finally, we realize the structure, conical intersection, and path optimizations by combining our MLEBF program with commercial and free packages, e.g., ASE and SciPy. These developments make MLEBF a practical and reliable tool for studying complex photochemical and photophysical processes of large nonbonded and bonded fragment systems.

Structures and properties of ionic crystals and condensed phase ionic liquids predicted with the generalized energy-based fragmentation method

The generalized energy-based fragmentation (GEBF) approach is extended to facilitate ab initio investigations of structures, lattice energies, vibrational spectra and ¹ H NMR chemical shifts of ionic crystals and condensed-phase ionic liquids (ILs) with the periodic boundary conditions (PBC). For selected periodic systems, our results demonstrate that the so-called PBC-GEBF approach can provide satisfactory descriptions on ground-state energies, structures, and vibrational spectra of ionic crystals and IL crystals. The PBC-GEBF approach is then applied to three realistic condensed phase systems. For three ionic crystals (LiCl, NaCl, and KCl), we apply the PBC-GEBF approach with MP2 theory as well as some popular DFT methods to investigate their crystal structures and lattice energies. Our calculations indicate that the crystal structures obtained with PBC-GEBF-MP2/6-311 + G** are very close to the corresponding X-ray structures, while PBC-GEBF-ωB97X-D/6-311 + G** provides satisfactory prediction for crystal structures and lattice energies. For two polymorphs of [n-C₄ mim][Cl] crystals, we find that the PBC-GEBF approach at the M06-2X/6-311 + G** level can give a satisfactory descriptions on structures and Raman spectra of these two crystals. Furthermore, for [C₂ mim][BF₄ ] ILs, we demonstrate that their ¹ H NMR chemical shifts can be estimated from averaging over 5 typical snapshots (extracted from MD simulations) with the PBC-GEBF approach at the B97-2/pcSseg-2 level. The calculated results account for the observed experimental data quite well. Therefore, we expect that the PBC-GEBF approach, combined with various quantum chemistry methods, will become an effective tool in predicting structures and properties of ionic crystals and condensed-phase ILs.

Graph-Theory-Based Molecular Fragmentation for Efficient and Accurate Potential Surface Calculations in Multiple Dimensions

We present a multitopology molecular fragmentation approach, based on graph theory, to calculate multidimensional potential energy surfaces in agreement with post-Hartree-Fock levels of theory but at the density functional theory cost. A molecular assembly is coarse-grained into a set of graph-theoretic nodes that are then connected with edges to represent a collection of locally interacting subsystems up to an arbitrary order. Each of the subsystems is treated at two levels of electronic structure theory, the result being used to construct many-body expansions that are embedded within an ONIOM scheme. These expansions converge rapidly with the many-body order (or graphical rank) of subsystems and capture many-body interactions accurately and efficiently. However, multiple graphs, and hence multiple fragmentation topologies, may be defined in molecular configuration space that may arise during conformational sampling or from reactive, bond breaking and bond formation, events. Obtaining the resultant potential surfaces is an exponential scaling proposition, given the number of electronic structure computations needed. We utilize a family of graph-theoretic representations within a variational scheme to obtain multidimensional potential surfaces at a reduced cost. The fast convergence of the graph-theoretic expansion with increasing order of many-body interactions alleviates the exponential scaling cost for computing potential surfaces, with the need to only use molecular fragments that contain a fewer number of quantum nuclear degrees of freedom compared to the full system. This is because the dimensionality of the conformational space sampled by the fragment subsystems is much smaller than the full molecular configurational space. Additionally, we also introduce a multidimensional clustering algorithm, based on physically defined criteria, to reduce the number of energy calculations by orders of magnitude. The molecular systems benchmarked include coupled proton motion in protonated water wires. The potential energy surfaces and multidimensional nuclear eigenstates obtained are shown to be in very good agreement with those from explicit post-Hartree-Fock calculations that become prohibitive as the number of quantum nuclear dimensions grows. The developments here provide a rigorous and efficient alternative to this important chemical physics problem.

Molecular Dynamics Driven by the Many-Body Expansion (MBE-MD)

We present a protocol for classical and nuclear quantum dynamics, in which the energies and forces are generated by the many-body expansion (MBE), and apply it to water clusters using the TTM2.1-F and MB-Pol interaction potentials at various temperatures. We carry out MBE-molecular dynamics (MD) classical and nuclear quantum dynamical simulations, in which the energies and forces of the full system are approximated by the two-, three-, and four-body terms of the MBE, and compare the average potential and the vibrational density of states with the full simulation, i.e., the one for which no MBE is used. Our results indicate that the thermally averaged potential energy from the MBE up to the four-body term converges with near-identical behavior to the one from the full simulation. The three-body makes a substantial contribution (∼20%) to the energy, whereas the four-body is necessary for obtaining quantitatively accurate energetics and forces, albeit making a small contribution to each (∼2%). We further show that the harmonic frequencies are reproduced to within a few wavenumbers (cm^-1) at the four-body level and that the slowest modes to converge with the MBE rank are those involving the strongest hydrogen bonds. Anharmonicity exacerbates this effect, so that a four-body description of the energies and forces is needed to achieve accurate anharmonic vibrational frequencies in the hydrogen-bonded OH-stretching region. We also discuss the asymptotic scaling of the MBE-MD protocol with respect to the cost of the underlying potential energy evaluation, suggesting that electronic structure methods that scale at least as N⁴, N being the size of the system, are needed to result in savings over the traditional full MD simulation. We anticipate that the MBE-MD protocol can evolve into a powerful and practical method, which will allow for highly accurate ab initio MD simulations on a much broader range of molecular systems than can be currently handled.

A unified and flexible formulation of molecular fragmentation schemes

We present a flexible formulation for energy-based molecular fragmentation schemes. This framework does not only incorporate the majority of existing fragmentation expansions but also allows for flexible formulation of novel schemes. We further illustrate its application in multi-level approaches and for electronic interaction energies. For the examples of small water clusters, a small protein, and protein-protein interaction energies, we show how this flexible setup can be exploited to generate a well-suited multi-level fragmentation expansion for the given case. With such a setup, we reproduce the electronic protein-protein interaction energy of ten different structures of a neurotensin and an extracellular loop of its receptor with a mean absolute deviation to the respective super-system calculations below 1 kJ/mol.

Weighted-Graph-Theoretic Methods for Many-Body Corrections within ONIOM: Smooth AIMD and the Role of High-Order Many-Body Terms

We present a weighted-graph-theoretic approach to adaptively compute contributions from many-body approximations for smooth and accurate post-Hartree-Fock (pHF) ab initio molecular dynamics (AIMD) of highly fluxional chemical systems. This approach is ONIOM-like, where the full system is treated at a computationally feasible quality of treatment (density functional theory (DFT) for the size of systems considered in this publication), which is then improved through a perturbative correction that captures local many-body interactions up to a certain order within a higher level of theory (post-Hartree-Fock in this publication) described through graph-theoretic techniques. Due to the fluxional and dynamical nature of the systems studied here, these graphical representations evolve during dynamics. As a result, energetic "hops" appear as the graphical representation deforms with the evolution of the chemical and physical properties of the system. In this paper, we introduce dynamically weighted, linear combinations of graphs, where the transition between graphical representations is smoothly achieved by considering a range of neighboring graphical representations at a given instant during dynamics. We compare these trajectories with those obtained from a set of trajectories where the range of local many-body interactions considered is increased, sometimes to the maximum available limit, which yields conservative trajectories as the order of interactions is increased. The weighted-graph approach presents improved dynamics trajectories while only using lower-order many-body interaction terms. The methods are compared by computing dynamical properties through time-correlation functions and structural distribution functions. In all cases, the weighted-graph approach provides accurate results at a lower cost.

Electrostatically embedded molecules-in-molecules approach and its application to molecular clusters

We report the application of our fragment-based quantum chemistry model MIM (Molecules-In-Molecules) with electrostatic embedding. The method is termed "EE-MIM (Electrostatically Embedded Molecules-In-Molecules)" and accounts for the missing electrostatic interactions in the subsystems resulting from fragmentation. Point charges placed at the atomic positions are used to represent the interaction of each subsystem with the rest of the molecule with minimal increase in the computational cost. We have carefully calibrated this model on a range of different sizes of clusters containing up to 57 water molecules. The fragmentation methods have been applied with the goal of reproducing the unfragmented total energy at the MP2/6-311G(d,p) level. Comparative analysis has been carried out between MIM and EE-MIM to gauge the impact of electrostatic embedding. Performance of several different parameters such as the type of charge and levels of fragmentation are analyzed for the prediction of absolute energies. The use of background charges in subsystem calculations improves the performance of both one- and two-layer MIM while it is noticeably important in the case of one-layer MIM. Embedded charges for two-layer MIM are obtained from a full system calculation at the low-level. For one-layer MIM, in the absence of a full system calculation, two different types of embedded charges, namely, Geometry dependent (GD) and geometry independent (GI) charges, are used. A self-consistent procedure is employed to obtain GD charges. We have further tested our method on challenging charged systems with stronger intermolecular interactions, namely, protonated ammonia clusters (containing up to 30 ammonia molecules). The observations are similar to water clusters with improved performance using embedded charges. Overall, the performance of NPA charges as embedded charges is found to be the best.

The Many-Body Expansion for Aqueous Systems Revisited: II. Alkali Metal and Halide Ion-Water Interactions

We present a detailed study of the many-body expansion (MBE) for alkali metal and halide ion-water interactions and quantify the effect of these ions on the strength of the surrounding aqueous hydrogen bonding environment. Building on our previous work on neutral water clusters [J. P. Heindel and S. S. Xantheas, J. Chem. Theor. Comput. 16 (11), 6843-6855 (2020)], we carry out the MBE for the alkali metal and halide ion-water clusters, Z^+/-(H₂O)₉, where Z = Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, F^-, Cl^-, Br^-, and I^- and compare them with the results for a pure water cluster with the same number of "bodies", viz., (H₂O)₁₀. The 2-B ion-water (I-W) interaction accounts for a larger percentage of the total cluster binding energy compared to a pure water cluster of the same size, with the total 3-B term being smaller and of opposite sign (repulsive), whereas higher order terms are essentially negligible. The same oscillating behavior around zero for the MBE terms higher than the 5-B with a basis set that was reported for water clusters is also observed for the ion-water clusters considered here, with the basis set superposition error (BSSE) corrections amending this as in the water cluster case. A remarkable, linear anticorrelation between the total 2-B (I-W), the total 2-B (W-W), and also the 3-B (W-W-W) interactions is found, quantifying the effect of the different ions in disrupting and altering (weakening) the neighboring hydrogen bonded water network: stronger (I-W) interactions result in weaker (W-W) interactions. Additional linear correlations across the two series of alkali metals and halide ions were found between the 3-B (I-W-W) and the 2-B (I-W) as well as between the 3-B (I-W-W) and the 3-B (W-W-W) interactions, suggesting the existence of previously unrealized underlying physics governing these 2-B intermolecular and 3-B collective interactions. Our results further suggest a universal behavior of the two different families of ions (alkali metals and halides) for both the correlations of the various components of the total binding energies and the estimate of the 2-B BSSE correction, which is reported to follow a common profile for ion-water and water-water interactions when cast in terms of reduced distances and energies of the respective dimers. We expect the current results that quantify the interplay between ion-water and water-water interactions in aqueous clusters to impact the development of classical, ab initio-based force fields for monatomic ion solvation, whereas the insights into the nature of the BSSE to be critical in future ab initio-based, many-body molecular dynamics studies.

Energy-Screened Many-Body Expansion: A Practical Yet Accurate Fragmentation Method for Quantum Chemistry

We introduce an implementation of the truncated many-body expansion, MBE(n), in which the n-body corrections are screened using the effective fragment potential force field, and only those that exceed a specified energy threshold are computed at a quantum-mechanical level of theory. This energy-screened MBE(n) approach is tested at the n = 3 level for a sequence of water clusters, (H₂O)_N=6-34. A threshold of 0.25 kJ/mol eliminates more than 80% of the subsystem electronic structure calculations and is even more efficacious in that respect than is distance-based screening. Even so, the energy-screened MBE(3) method is faithful to a full-system quantum chemistry calculation to within 1-2 kJ/mol/monomer, even in good quality basis sets such as aug-cc-pVTZ. These errors can be reduced by means of a two-layer approach that involves a Hartree-Fock calculation for the entire cluster. Such a correction proves to be necessary in order to obtain accurate relative energies for conformational isomers of (H₂O)₂₀, but the cost of a full-system Hartree-Fock calculation remains smaller than the cost of three-body subsystem calculations at correlated levels of theory. At the level of second-order Møller-Plesset perturbation theory (MP2), a screened MBE(3) calculation plus a full-system Hartree-Fock calculation is less expensive than a full-system MP2 calculation starting at N = 12 water molecules. This is true even if all MBE(3) subsystem calculations are performed on a single 40-core compute node, i.e., without significant parallelization. Energy-screened MBE(n) thus provides a fragment-based method that is accurate, stable in large basis sets, and low in cost, even when the latter is measured in aggregate computer time.

Fantasy versus reality in fragment-based quantum chemistry

Since the introduction of the fragment molecular orbital method 20 years ago, fragment-based approaches have occupied a small but growing niche in quantum chemistry. These methods decompose a large molecular system into subsystems small enough to be amenable to electronic structure calculations, following which the subsystem information is reassembled in order to approximate an otherwise intractable supersystem calculation. Fragmentation sidesteps the steep rise (with respect to system size) in the cost of ab initio calculations, replacing it with a distributed cost across numerous computer processors. Such methods are attractive, in part, because they are easily parallelizable and therefore readily amenable to exascale computing. As such, there has been hope that distributed computing might offer the proverbial "free lunch" in quantum chemistry, with the entrée being high-level calculations on very large systems. While fragment-based quantum chemistry can count many success stories, there also exists a seedy underbelly of rarely acknowledged problems. As these methods begin to mature, it is time to have a serious conversation about what they can and cannot be expected to accomplish in the near future. Both successes and challenges are highlighted in this Perspective.

Solvent Screening in Zwitterions Analyzed with the Fragment Molecular Orbital Method

Based on induced solvent charges, a new model of solvent screening is developed in the framework of the fragment molecular orbital combined with the polarizable continuum model. The developed model is applied to analyze interactions in a prototypical zwitterionic system, sodium chloride in water, and it is shown that the large underestimation of the interaction in the original solvent screening based on local charges is successfully corrected. The model is also applied to a complex of the Trp-cage (PDB: 1L2Y ) miniprotein with an anionic ligand, and the physical factors determined protein-ligand binding in solution are unraveled.