Féry Infrared Spectrometer for Single-Shot Analysis of Protein Dynamics

Infrared spectroscopy across scales in length and time at BESSY II

The infrared beamline at BESSY II storage ring was upgraded recently to extend the capabilities of infrared microscopy. The endstations available at the beamline are now facilitating improved characterization of molecules and materials at different length scales and time resolutions. Here, the current outline of the beamline is reported and an overview of the endstations available is given. In particular, the first results obtained by using a new microscope for nano-spectroscopy that was implemented are presented. The capabilities of the scattering-type near-field optical microscope (s-SNOM) are demonstrated by investigating cellulose microfibrils, representing nanoscopic objects of a hierarchical structure. It is shown that the s-SNOM coupled to the beamline allows imaging to be performed with a spatial resolution of less than 30 nm and infrared spectra to be collected from an effective volume of less than 30 nm × 30 nm × 12 nm. Potential steps for further optimization of the beamline performance are discussed.

Protein conformational changes and protonation dynamics probed by a single shot using quantum-cascade-laser-based IR spectroscopy

Mid-IR spectroscopy is a powerful and label-free technique to investigate protein reactions. In this study, we use quantum-cascade-laser-based dual-comb spectroscopy to probe protein conformational changes and protonation events by a single-shot experiment. By using a well-characterized membrane protein, bacteriorhodopsin, we provide a comparison between dual-comb spectroscopy and our homebuilt tunable quantum cascade laser (QCL)-based scanning spectrometer as tools to monitor irreversible reactions with high time resolution. In conclusion, QCL-based infrared spectroscopy is demonstrated to be feasible for tracing functionally relevant protein structural changes and proton translocations by single-shot experiments. Thus, we envisage a bright future for applications of this technology for monitoring the kinetics of irreversible reactions as in (bio-)chemical transformations.

Ultra-rapid electro-optic sampling of octave-spanning mid-infrared waveforms

We demonstrate ultra-rapid electro-optic sampling (EOS) of octave-spanning mid-infrared pulses centered at 9 μm, implemented by mechanically scanning a mirror with a sonotrode resonating at 19 kHz (forward and backward acquisition at 38 kHz). The instrument records the infrared waveform with a spectral intensity dynamic range of 1.6 × 10⁵ for a single scan over a 1.6-ps delay range, acquired within 26 μs. The purely reflective nature of the delay scanning technique is compatible with broad optical bandwidths, short pulse durations (16 fs, centered at 1030 nm) and high average powers (Watt-level). Interferometric tracking of the sonotrode motion in combination with a predictor-corrector algorithm allows for delay-axis determination with down to single-digit attosecond precision. Ultra-rapid mid-infrared EOS will advance applications such as molecular fingerprinting of static samples as well as tracking of biological processes and chemical reactions and is likely to find new fields of application such as infrared-spectroscopic flow cytometry.

Microsecond-Resolved Infrared Spectroscopy on Nonrepetitive Protein Reactions by Applying Caged Compounds and Quantum Cascade Laser Frequency Combs

Infrared spectroscopy is ideally suited for the investigation of protein reactions at the atomic level. Many systems were investigated successfully by applying Fourier transform infrared (FTIR) spectroscopy. While rapid-scan FTIR spectroscopy is limited by time resolution (about 10 ms with 16 cm^-1 resolution), step-scan FTIR spectroscopy reaches a time resolution of about 10 ns but is limited to cyclic reactions that can be repeated hundreds of times under identical conditions. Consequently, FTIR with high time resolution was only possible with photoactivable proteins that undergo a photocycle. The huge number of nonrepetitive reactions, e.g., induced by caged compounds, were limited to the millisecond time domain. The advent of dual-comb quantum cascade laser now allows for a rapid reaction monitoring in the microsecond time domain. Here, we investigate the potential to apply such an instrument to the huge class of G-proteins. We compare caged-compound-induced reactions monitored by FTIR and dual-comb spectroscopy by applying the new technique to the α subunit of the inhibiting G_i protein and to the larger protein-protein complex of Gα_i with its cognate regulator of G-protein signaling (RGS). We observe good data quality with a 4 μs time resolution with a wavelength resolution comparable to FTIR. This is more than three orders of magnitude faster than any FTIR measurement on G-proteins in the literature. This study paves the way for infrared spectroscopic studies in the so far unresolvable microsecond time regime for nonrepetitive biological systems including all GTPases and ATPases.

A quantum cascade laser setup for studying irreversible photoreactions in H2O with nanosecond resolution and microlitre consumption

Time-resolved infrared spectroscopy on irreversible reactions requires in general an exchange of sample for thousands of acquisitions leading to high sample consumption. Here, we present a setup employing a modern quantum cascade laser (QCL) as a probe light source to record time-resolved difference spectra of irreversible photoreactions in H2O. The combination of the focused QCL with a pressure-tolerant flow cell and a micrometre stage orthogonal to the flow allowed us to drastically reduce the sample consumption. We investigated the irreversible photoreduction of the cofactor flavin mononucleotide (FMN) in H2O, which is a common reaction taking place in biological photoreceptors. A broad time range from 20 nanoseconds to 1 second was accessible, because the approach minimized any signal drift by the flow. Kinetics were recorded at 46 selected wavenumbers consuming 12 microlitres for a complete dataset. The tuning range of 1490-1740 cm-1 included relevant carbonyl vibrations and the region of strong water absorption at around 1650 cm-1. A continuous dataset in the spectral dimension was generated by applying a fit with a sum of Lorentzians. Subsequent global analysis allowed us to resolve reference spectra and kinetics of the photoreaction proceeding from the triplet excited state via the intermediate flavin anion radical to the product, the fully reduced state of FMN. Accordingly, the neutral radical state is not populated in the disproportionation. The approach strongly facilitates the spectroscopic access to irreversible reactions of flavin-containing photoreceptors and photoenzymes with high time resolution and small sample consumption.

Infrared Difference Spectroscopy of Proteins: From Bands to Bonds

Infrared difference spectroscopy probes vibrational changes of proteins upon their perturbation. Compared with other spectroscopic methods, it stands out by its sensitivity to the protonation state, H-bonding, and the conformation of different groups in proteins, including the peptide backbone, amino acid side chains, internal water molecules, or cofactors. In particular, the detection of protonation and H-bonding changes in a time-resolved manner, not easily obtained by other techniques, is one of the most successful applications of IR difference spectroscopy. The present review deals with the use of perturbations designed to specifically change the protein between two (or more) functionally relevant states, a strategy often referred to as reaction-induced IR difference spectroscopy. In the first half of this contribution, I review the technique of reaction-induced IR difference spectroscopy of proteins, with special emphasis given to the preparation of suitable samples and their characterization, strategies for the perturbation of proteins, and methodologies for time-resolved measurements (from nanoseconds to minutes). The second half of this contribution focuses on the spectral interpretation. It starts by reviewing how changes in H-bonding, medium polarity, and vibrational coupling affect vibrational frequencies, intensities, and bandwidths. It is followed by band assignments, a crucial aspect mostly performed with the help of isotopic labeling and site-directed mutagenesis, and complemented by integration and interpretation of the results in the context of the studied protein, an aspect increasingly supported by spectral calculations. Selected examples from the literature, predominately but not exclusively from retinal proteins, are used to illustrate the topics covered in this review.