Ag(I)-Hived Fullerene Microcube as an Enhanced Catalytic Substrate for the Reduction of 4-Nitrophenol and the Photodegradation of Orange G Dye

Efficient Removal and Recovery of Ag from Wastewater Using Charged Polystyrene-Polydopamine Nanocoatings and Their Sustainable Catalytic Application in 4-Nitrophenol Reduction

This study addresses the long-standing challenges of removing and recovering trace silver (Ag) ions from wastewater while promoting their sustainable catalysis utilization. We innovatively developed a composite material by combining charged sulfonated polystyrene (PS) with a PDA coating. This composite serves a dual purpose: effectively removing and recovering trace Ag+ from wastewater and enabling reused Ag for sustainable applications, particularly in the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The PS-PDA demonstrated exceptional selectivity to trace Ag+ recycling, which is equal to 14 times greater than the commercial ion exchanger. We emphasize the distinct roles of different charged functional groups in Ag+ removal and catalytic reduction performance. The negatively charged SO3H groups exhibited the remarkable ability to rapidly enrich trace Ag ions from wastewater, with a capacity 2-3 times higher than that of positively-N+(CH3)3Cl and netural-CH2Cl-modified composites; this resulted in an impressive 96% conversion of 4-NP to 4-AP within just 25 min. The fixed-bed application further confirmed the effective treatment capacity of approximately 4400 L of water per kilogram of adsorbent, while maintaining an extremely low effluent Ag+ concentration of less than 0.1 mg/L. XPS investigations provided valuable insights into the conversion of Ag+ ions into metallic Ag through the enticement of negatively charged SO3H groups and the in situ reduction facilitated by PDA. This breakthrough not only facilitates the efficient extraction of Ag from wastewater but also paves the way for its environmentally responsible utilization in catalytic reactions.

Insights into the antibacterial activity and antibacterial mechanism of silver modified fullerene towards Staphylococcus aureus by multiple spectrometric examinations

Clarifying the antibacterial mechanism of silver (Ag)-based materials is of great significance for the rational design, synthesis, and evaluation of antimicrobials. Herein, detailed description of the antibacterial mechanism of a synthesized silver deposited fullerene material (Ag(I)-C60) towards Staphylococcus aureus was surveyed from the point of view of DNA damage by ultraviolet-visible spectroscopy (UV-vis), inductively coupled plasma mass spectrometry (ICP-MS), and liquid chromatography-mass spectrometry (LC-MS). The model material, Ag(I)-C60, was prepared by liquid-liquid interfacial precipitation method, and characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermos-gravimetric analysis (TGA), and nitrogen adsorption/desorption analysis. Ultra-efficient bacteriostatic rate of Ag(I)-C60 was found to be 88.98% under light irradiation for 20 min. UV-vis measurement of the composition changes of four DNA bases showed that they changed in the presence of Ag(I)-C60 under light irradiation, suggesting Ag(I)-C60 could destroy the cells and genetic material of Staphylococcus aureus and thereby inhibit its growth and reproduction. ICP-MS analysis demonstrated the releasing behavior of Ag+ from Ag-based materials. Finally, the transformation pathway of G, A, C, and T were measured by LC-MS, demonstrating the conversion of Adenine (m/z 136.06) to 8-OH-Ade (m/z 174.04). These collective results suggested that Ag(I)-C60 was a new ultra-efficient antibacterial by slowly releasing Ag+ in water and producing a large amount of ROS under light.

Cu-Based Catalysts Supported on H3PO4-Activated Coffee Biochar for Selective Reduction of Nitroaromatics

Selective reduction of nitroaromatics to the corresponding aromatic amines is extremely an attractive chemical process for both fundamental research and potential commercial applications. Herewith, we report that a highly dispersed Cu catalyst supported on H₃PO₄-activated coffee biochar and the resulting Cu/PBCR-600 catalyst show complete conversion of the nitroaromatics and >97.0% selectivity for the corresponding aromatic amines. The TOF of catalyzing the reduction of nitroaromatics (1.55-460.74 min^-1) is approximately 2 to 15 times higher than those of previously reported non-noble and even noble metal catalysts. Additionally, Cu/PBCR-600 also shows high stability in catalytic recycles. Furthermore, it exhibits long-term catalytic stability (660 min) for practical application in a continuous-flow reactor. The characterizations and activity tests reveal that Cu⁰ existing in Cu/PBCR-600 acts as an active site in nitroaromatics reduction. Also, the further characterization by FTIR and UV-vis demonstrates that N, P co-doped coffee biochar could selectively adsorb and activate the nitro group of nitroaromatics.

Photocatalytic Degradation of Orange G Dye by Using Bismuth Molybdate: Photocatalysis Optimization and Modeling via Definitive Screening Designs

In the current study, Bismuth molybdate was synthesized using simple co-precipitation procedure, and their characterization was carried out by various methods such as FT-IR, SEM, and P-XRD. Furthermore, the photocatalytic degradation of Orange G (ORG) dye using synthesized catalyst under visible light irradiation was studied. Response surface Method was used for the optimization of process variables and degradation kinetics evaluated by modeling of experimental data. Based on the experimental design outcomes, the first-order model was proven as a practical correlation between selected factors and response. Further ANOVA analysis has revealed that only two out of six factors have a significant effect on ORG degradation, however ORG concentration and irradiation time indicated the significant effects sequentially. Maximum ORG degradation of approximately 96% was achieved by keeping process parameters in range, such as 1 g L-1 loading of catalyst, 50 mg L-1 concentration of ORG, 1.4 mol L-1 concentration of H2O2 at pH 7 and a temperature of 30 °C. Kinetics of ORG degradation followed the pseudo first order, and almost complete degradation was achieved within 8 h. The effectiveness of the Bi2MoO6/H2O2 photo-Fenton system in degradation reactions is due to the higher number of photo-generated e- available on the catalyst surface as a result of their ability to inhibit recombination of e- and h+ pair.

Regulation of the Volume Flow Rate of Aqueous Methyl Blue Solution and the Wettability of CuO/ZnO Nanorods to Improve the Photodegradation Performance of Related Microfluidic Reactors

Six CuO/ZnO nanorod (CuO/ZnONR)-based microfluidic reactors were constructed for different UV irradiation durations, with which an aqueous methylene blue (MB) solution was photodegraded at varied volume flow rate Q. Via numerical and experimental routes, the effects of the Q on the kinetic adsorption rate constant K_a and the initial rate constant K_A of the CuO/ZnONR-based microfluidic reactors were discussed. Moreover, a reverse contacting angle (CA) trend of CuO/ZnONRs to the reaction constant K curve of corresponding CuO/ZnONR-based microfluidic reactor suggested that the CA of CuO/ZnONRs was another key influencing factor that affected greatly the photodegradation performance of the microfluidic reactors. The Q of the aqueous MB solution and the UV irradiation duration for the photodeposition of CuO/ZnONRs were optimized to be 125 μL/min and 1.0 h, the K of the CuO/ZnONR-based microfluidic reactors reached 4.84 min^-1, and the related ΔK_A/K was less than 6%. Similarly, these methods and results can be employed not only to enhance the mass transport and adsorption of specific species within other nanostructured matrix material-coated microchannels but also to enlarge the actual contacting surface areas between these microchannels and the related solution, which further improve the performance of other nanostructured catalyst-based microfluidic reactors, rGO microfluidic voltage generation, and a GOx/AuNW enzymatic glucose microfluidic sensor.

Visible-light driven photodegradation on Ag nanoparticle-embedded fullerene (C60) heterostructural microcubes

Three-dimensional Ag(I)-fullerene hybrid microcrystal is fabricated by AgNO₃ assisted liquid-liquid interfacial precipitation, containing the abundant sp²-π-electron system. With a mild chemical reduction, it produces the massive Ag nanocluster/fullerene junctions, on which fullerene doubles role as the excellent electron acceptor and photon scavenger, enabling the Plasmon-driven catalytic reaction. Ag nanocluster employed alone could not perform this photocatalytic reaction, neither of fullerene (C₆₀) crystal. It implicates that Ag-fullerene interface is a key to drive catalytic process. Relative to conventional TiO₂ nanostructures, fullerene expands light absorption to most solar wavelength and possesses a tightened bandgap which intrinsically expedites the charge transfer and charge separation from coinage metals. Demonstrated by photodegradation of organic molecules, this Ag(I)-fullerene (C₆₀) composite, consisted of a plethora of electron donor-acceptor dyads renders an additional member to photocatalyst family, potentially implemented for photo-electron conversion, water remedy and beyond.