In-Operando Detection of the Physical Property Changes of an Interfacial Electrolyte during the Li-Metal Electrode Reaction by Atomic Force Microscopy

Electrochemical Surface Plasmon Resonance Spectroscopy for Investigation of the Initial Process of Lithium Metal Deposition

The initial process of Li-metal electrodeposition on the negative electrode surface determines the charging performance of Li-metal secondary batteries. However, minute depositions or the early processes of nucleation and growth of Li metal are generally difficult to detect under operando conditions. In this study, we propose an optical diagnostic approach to address these challenges. Surface plasmon resonance (SPR) spectroscopy coupled with electrochemical operation is a promising technique that enables the ultrasensitive detection of the initial stage of Li-metal electrodeposition. The SPR is excited in a thin copper film deposited on a glass substrate, which also serves as a current collector enabling electrochemical Li-metal deposition. For a propylene carbonate (PC)-based Li-ion battery electrolyte, under both cyclic voltammetry and constant-current operation, Li-metal deposition is readily detected by changes in the SPR absorption dip in the reflectance spectrum. Electrochemical SPR is highly sensitive to metal deposition, with a demonstrated capability of detecting an average thickness of approximately 0.1 nm, corresponding to a few atomic layers of Li. To identify the growth mechanism, the SPR reflectance spectra of various possible Li-metal deposition processes were simulated. Comparison of the simulated spectra with the experimental data found good agreement with the well-known nucleation and growth model for Li-metal deposition from PC-based electrolytes. The demonstrated operando electrochemical SPR measurement should be a valuable tool for basic research on the initial Li-metal deposition process.

Bimodal AFM-Based Nanocharacterization of Cycling-Induced Topographic and Mechanical Evolutions of LiMn2O4 Cathode Films

Evolution of LiMn₂O₄ mechanical property during charge/discharge cycles is a critical issue because it is closely related to the performance of lithium-ion batteries. Extensive studies have been conducted by first-principles calculations/molecular dynamics simulation at the atomic level and by the nanoindentation technique at the micron scale. In this study, cycling-induced topographic and mechanical evolutions of the LiMn₂O₄ films are investigated at the nanoscale using the bimodal atomic force microscopy (AFM), which provides a complementary approach to bridge the gap between atomic-level calculation and micron-scale measurement. The topographic change and elastic modulus degradation of the LiMn₂O₄ films during the charge/discharge cycles are found to occur simultaneously and irreversibly. Moreover, a dramatic decrease in the elastic modulus of the films takes place at the first 10 cycles, which is consistent with the significant loss of the capacity and the change of the Coulombic efficiency measured by the galvanostatic method. By considering the nanoscale phenomena and the macroscopic measurement results, the reasons for the elastic modulus degradation are discussed. This study would be a valuable addition to a better understanding of the degradation mechanisms of this cathode material.