Dendritic Fibrous Nanosilica (DFNS) for RNA Extraction from Cells

Internally bridged nanosilica for loadings and release of sparsely soluble compounds

The engineering of a new monodisperse colloid with a sea urchin-like structure with a large complex internal structure is reported, in which silica surfaces are bridged by an aromatic organic cross-linker to serve as a nanocarrier host for drugs such as doxorubicin (DOX) against breast cancer cells. While dendritic fibrous nanosilica (DFNS) was employed and we do not observe a dendritic structure, these particles are referred to as sea urchin-like nanostructured silica (SNS). Since the structure of SNS consists of many silica fibrils protruding from the core, similar to the hairs of a sea urchin. For the aromatic structured cross-linker, bis(propyliminomethyl)benzene (b(PIM)B-S or silanated terephtaldehyde) were employed, which are prepared with terephtaldehyde and 3-aminopropyltriethoxy-silane (APTES) through a simple Schiff base reaction. b(PIM)B-S bridges were introduced into SNS under open vessel reflux conditions. SPS refers to the product obtained by incorporating the cross-linker b(PIM)B-S in ultra-small colloidal SNS particles. In-situ incorporation of DOX molecules resulted in SPS-DOX. The pH-responsive SPS nanocomposites were tested as biocompatible nanocarriers for controllable doxorubicin (DOX) delivery. We conclude that SPS is a unique colloid which has promising potential for technological applications such as advanced drug delivery systems, wastewater remediation and as a catalyst for green organic reactions in water.

Development of Magnetic Deep Eutectic Solvent-Based Liquid-Liquid Extraction for the Selective Extraction and Separation of RNA

Four kinds of hydrophobic magnetic deep eutectic solvents (HMDESs) were prepared and applied to RNA extraction. Based on the HMDESs, a mechanical shaking-assisted liquid-liquid extraction (MSLLE) was developed for the extraction of RNA. Factors that influence the extraction, including the extraction time, temperature, volume of HMDES, buffer types, and pH, were evaluated. After the optimization of all conditions, the RNA extraction efficiency was 82.31 ± 0.02%. RNA can be extracted from complex samples and medicinal yeast by the method proposed in this work and can be recovered from the HMDESs after being extracted.

Dendritic Fibrous Nanosilica: Discovery, Synthesis, Formation Mechanism, Catalysis, and CO2 Capture-Conversion

ConspectusSilica-based mesoporous nanomaterials have been widely used for a range of applications. Although mesopore materials (such as MCM-41 and SBA-15) possess high surface area, due to their tubular pore structures, pore accessibility is restricted, which causes limitations in mass transport. A new nanosilica was needed to overcome these challenges, including better accessibility, controllable particle size, and good stability. In 2010, my group invented dendritic fibrous nanosilica (DFNS), which has now become a family of novel nanosilicas. DFNS has several unique properties: (i) Tunable particle sizes (50 to 1200 nm), (ii) high surface area (500 to 1200 m²/g), (iii) tunable pore volume (0.32 to 2.18 cm³/g), (iv) wide pore size distribution (3.7 to 25 nm) characterized by radially oriented pores, (v) controllable fiber density (number of fibers per sphere), (vi) variable pore size and pore volume, (vi) high thermal (∼800 °C) and hydrothermal stability, and (vii) mechanical stability (∼130 MPa). DFNS possesses unique dendritic fibrous morphology, and hence can be reached from all sides and easily accessible. DFNS can now be synthesized using a open refluxing protocol, which allowed the scale-up of the process with a sustainable E-factor. In the last 12 years, the DFNS family of materials has been extensively studied for their formation mechanism and range of applications such as catalysis, solar energy harvesting, CO₂ capture, CO₂ conversion, sensing, biomedicine, energy storage and many more.This Account discusses the invention of DFNS, its synthesis with tunable particle size, textural properties (surface area, pore volume, and pore size), and fiber density. In addition, the DFNS formation mechanism via the complex interplay of self-assembly, the dynamics, and coalescence of bicontinuous microemulsion droplets (BMDs) is discussed. Finally, applications of DFNS in a range of fields, that include catalysis, photocatalysis, synthesis of plasmonic black gold, nanosponges of aluminosilicates, CO₂ capture, and CO₂ conversion to fuel, are presented.

Dendritic Fibrous Colloidal Silica Internally Cross-linked by Bivalent Organic Cations: An Efficient Support for Dye Removal and the Reduction of Nitrobenzene Derivatives

We designed a new unique amphoteric monodisperse colloid with a large complex internal structure, in which silica surfaces are bridged with an organic cross-linker. The rationale was that such colloids would be excellent adsorbents for cationic and anionic dyes and, when doped with noble metal nanoparticles, would be an excellent catalyst for the reduction of a variety of organic compounds. In the first step, the organo-silica bridging agent (bivalent organic cross-linkers) DABCO-S (silanated DABCO) was prepared through a simple nucleophilic substitution reaction between (3-chloropropyl)triethoxysilane and bivalent 1,4-diazabicyclo[2.2.2]octane (DABCO) (a strong base). In the second step, a DABCO-S bridge was introduced into dendritic fibrous nanostructured colloidal silica (DFNS) under open-vessel reflux conditions. We refer to the product obtained by incorporating DABCO-S in DFNS as DDS. The unique characteristics of DFNS are completely preserved in this new type of periodic mesoporous organo-silica-DFNS. The produced nanocomposite has a high surface area of about 807 m² g^-1, a large pore volume of 1.9 cm³ g^-1, and a bimodal pore size distribution, with small 2.5 nm pores and large 30 nm pores. As such, DDS is an efficient adsorbent for dye removal from wastewater. The results show that DDS can adsorb positive and negative dyes such as methylene blue, orange II sodium salt (OR), and procion red mx-58 (PR) with a capacity of 678, 3192, and 3190 mg dye/g adsorbent. Introducing silver nanoparticles in situ into DDS leads to a composite with excellent accessibility of reactants to the Ag surface, resulting in an efficient catalytic reduction of nitro aromatic compounds (NACs) in aqueous media.

Origin of the Hierarchical Structure of Dendritic Fibrous Nanosilica: A Small-Angle X-ray Scattering Perspective

The discovery of dendritic fibrous nanosilica (DFNS) has attracted great attention to the field of catalysis, CO₂ capture, drug delivery due to its distinct morphology, and pore size distribution. Despite extensive research, the understanding of the DFNS formation process and its internal structure remains incomplete as microscopy and gas sorption techniques were not able to provide necessary in-depth structural information due to their inherent limitations. In the current work, we present a structural model of DFNS derived using small-angle X-ray scattering (SAXS) supported by ¹²⁹Xe nuclear magnetic resonance (NMR), which provided intricate details of DFNS and its internal structure. Mechanistic understanding of the DFNS formation and growth process was achieved by performing time-resolved SAXS measurements during the synthesis of DFNS, which unveils the evolution of two levels of a bicontinuous microemulsion structure responsible for intricate DFNS morphology. The validity and the accuracy of the SAXS method and the model were successfully established through a direct correlation among the functionality of the DFNS scattering profile and its pore size distribution, as well as results obtained from the ¹²⁹Xe NMR studies. It has been established that the DFNS structure originates from direct modulation of the bicontinuous structure controlled by a surfactant, a co-surfactant, and the silicate species formed during hydrolysis and the condensation reaction of the silica precursor.

Iron oxide (Fe3O4) magnetic nanoparticles supported on wrinkled fibrous nanosilica (WFNS) functionalized by biimidazole ionic liquid as an effective and reusable heterogeneous magnetic nanocatalyst for the efficient synthesis of N-sulfonylamidines

Wrinkled fibrous nanosilica (WFNS) which functionalized by ionic liquid modified Fe3O4 NPs and CuI salts has been synthesized and characterized with FE-SEM, TEM, FT-IR, FAAS, EDX, and, XRD, VSM, and BET-BJH analysis. This new and effective magnetic ceramic nanocatalyst has been applied towards rapid synthesis of N-sulfonylamidines using reaction of phenyl acetylene, substituted sulfonyl azide and various amines under solvent-free conditions in very short reaction time. Higher catalytic activity CuI/Fe3O4NPs@IL-DFNS in the reaction is because of special structure of DFNS and existence of ionic liquids on its pores which act as a robust anchors to the loaded various nano-particles. So, this lead to no leaching of them from the pore of the composite. Shorter reaction time, higher yield, recovery of the catalyst using an external magnet and its reusability for 8 series without noteworthy reduction in its activity are the advantages of newly synthetic catalyst toward efficient synthesis of N-sulfonylamidines.