Nb2CTx MXene as High-Performance Energy Storage Material with Na, K, and Liquid K-Na Alloy Anodes

Self-Thermal Management in Filtered Selenium-Terminated MXene Films for Flexible Safe Batteries

Li-ion batteries with superior interior thermal management are crucial to prevent thermal runaway and ensure safe, long-lasting operation at high temperatures or during rapid discharging and charging. Typically, such thermal management is achieved by focusing on the separator and electrolyte. Here, the study introduces a Se-terminated MXene free-standing electrode with exceptional electrical conductivity and low infrared emissivity, synergistically combining high-rate capacity with reduced heat radiation for safe, large, and fast Li+ storage. This is achieved through a one-step organic Lewis acid-assisted gas-phase reaction and vacuum filtration. The Se-terminated Nb2Se2C outperformed conventional disordered O/OH/F-terminated materials, enhancing Li+-storage capacity by ≈1.5 times in the fifth cycle (221 mAh·g-1 at 1 A·g-1) and improving mid-infrared adsorption with low thermal radiation. These benefits result from its superior electrical conductivity, excellent structural stability, and high permittivity in the infrared region. Calculations further reveal that increased permittivity and conductivity along the z-direction can reduce heat radiation from electrodes. This work highlights the potential of surface groups-terminated layered material-based free-standing flexible electrodes with self-thermal management ability for safe, fast energy storage.

Alcohol Vapor Sensor Based on Quasi-2D Nb2O5 Derived from Oxidized Nb2CTz MXenes

MXenes are two-dimensional (2D) materials with a great potential for sensor applications due to their high aspect ratio and fully functionalized surface that can be tuned for specific gas adsorption. Here, we demonstrate that the Nb2CTz-based sensor exhibits high performance towards alcohol vapors at temperatures up to 300-350 °C, with the best sensitivity towards ethanol. We attribute the observed remarkable chemiresistive effect of this material to the formation of quasi-2D Nb2O5 sheets as the result of the oxidation of Nb-based MXenes. These findings are supported by synchrotron X-ray photoelectron spectroscopy studies together with X-ray diffraction and electron microscopy observations. For analyte selectivity, we employ a multisensor approach where the gas recognition is achieved by linear discriminant analysis of the vector response of the on-chip sensor array. The reported protocol demonstrates that MXene layers are efficient precursors for the derivation of 2D oxide architectures, which are suitable for developing gas sensors and sensor arrays.

Recent advances and promise of MXene-based composites as electrode materials for sodium-ion and potassium-ion batteries

With the increasing demand for sustainable energy and concerns about the scarcity of lithium resources, sodium and potassium ion batteries have emerged as promising alternative energy storage technologies. MXene, as a novel two-dimensional material, possesses exceptional electrical conductivity, high surface area, and tunable structural features that make it an ideal candidate for high-performance electrode materials. However, its limited theoretical capacity hinders its widespread application. To overcome this limitation, MXene has been combined with other materials through synergistic effects between different components to enhance the overall electrochemical performance and expand its application in sodium/potassium ion batteries. Recently, substantial advancements have been realized in the exploration of MXene-based composites as energy storage materials, encompassing their synthesis, design, and the comprehension of charge storage mechanisms. This paper aims to propose a comprehensive summary of the latest developments in MXene-based composites as electrode materials for sodium ion batteries and potassium ion batteries, with a particular emphasis on the enhanced physicochemical properties resulting from composite formation. Moreover, the challenges faced by MXene materials in sodium ion batteries and potassium ion batteries are thoroughly discussed, and future research directions to further advance this field are proposed.

Pillaring Behavior of Organic Molecules on MXene: Insights from Molecular Dynamics Simulations

Pillaring MXene with organic molecules is an effective approach to expand the interlayer spacing and increase the accessible surface area for enhanced performance in energy storage applications. Herein, molecular dynamics simulations are employed to explore the pillaring effect of six organic molecules on Ti3C2O2. The interlayer spacing and structural characteristics of MXene after the insertion of different organic molecules are examined, and the influence of the type and quantity of organic molecules on the pillared MXene structure is systematically investigated. The results demonstrate that the inserted molecules are influenced by interactions between MXene layers, resulting in a thinner morphology. Effective pillar support on MXene is achieved only when a specific quantity of organic molecules is inserted between the layers. Furthermore, different organic molecules occupy distinct surface areas on MXene when acting as pillars. Pillaring molecules with a Pi-conjugated ring structure require a larger surface area on MXene, whereas those with a branched structure occupy a smaller surface area. Additionally, organic molecules containing oxygen functional groups tend to aggregate due to hydrogen bonding, impeding their diffusion within MXene sheets. Considering the interlayer expansion of MXene, surface area occupation, and diffusion characteristics, the isopropylamine demonstrates the most favorable pillaring effect on MXene. These findings provide valuable insights into the design and application of pillared MXenes in energy storage and other applications. Further studies on the properties and applications of the optimized pillared MXene structures will be conducted in the future.

Applications of MXene-Containing Polypyrrole Nanocomposites in Electrochemical Energy Storage and Conversion

The atomically thick two-dimensional (2D) materials are at the forefront of revolutionary technologies for energy storage devices. Due to their fascinating physical and chemical features, these materials have gotten a lot of attention. They are particularly appealing for a wide range of applications, including electrochemical storage systems, due to their simplicity of property tuning. The MXene is a type of 2D material that is widely recognized for its exceptional electrochemical characteristics. The use of these materials in conjunction with conducting polymers, notably polypyrrole (PPy), has opened new possibilities for lightweight, flexible, and portable electrodes. Therefore, herein we report a comprehensive review of recent achievements in the production of MXene/PPy nanocomposites. The structural-property relationship of this class of nanocomposites was taken into consideration with an elaborate discussion of the various characterizations employed. As a result, this research gives a narrative explanation of how PPy interacts with distinct MXenes to produce desirable high-performance nanocomposites. The effects of MXene incorporation on the thermal, electrical, and electrochemical characteristics of the resultant nanocomposites were discussed. Finally, it is critically reviewed and presented as an advanced composite material in electrochemical storage devices, energy conversion, electrochemical sensors, and electromagnetic interference shielding.

Ti2CT2 MXene as Anodes for Metal Ion Batteries: From Monolayer to Bilayer to Pillar Structure

The electrochemical performances of Ti₂CT₂ (T = F, O, and OH) MXenes with different layer structures (monolayer, bilayer, and pillared structures) as anodes for mono-/multivalent metal ion (Li⁺, Na⁺, Mg²⁺, and Al³⁺) batteries (MIBs) were studied via first-principles simulations. First, metal ions (MIs) adsorbed on Ti₂CT₂ monolayers were investigated to reveal the influence of MXene terminated groups on MIB performance. This indicated that O-terminated MXenes would be more suitable as electrodes. In particular, the theoretical capacity of Mg²⁺ on a Ti₂CO₂ monolayer could be more than 1500 mA h g^-1. Then, MIs intercalated into MXene bilayers were considered to better understand the charging/discharging mechanism. In a Ti₂CO₂ bilayer with larger interlayer spacing, monovalent MIs and Mg²⁺ could form a multilayer accompanied by drastic expansion/contraction of the electrode, which still needs to be solved. Finally, imidazolium-based ionic liquids were used to preintercalate into MXene due to the matching size of the imidazolium cation, which effectively improved MXene stability and inhibited the self-stacking of layered MXenes. Our research would be helpful for theoretically regulating MXene functional groups and adjusting the interlayer spacing of MXenes via selecting guest molecules for designing MIBs and other energy storage devices.

Environment Friendly g-C3N4-Based Catalysts and Their Recent Strategy in Organic Transformations

Organic molecules synthesized in an environmentally friendly manner have excellent therapeutic potential. The entire preparation technique was examined in the existence of a light source, implying that light has been replaced by heating and the usage of dangerous chemicals has decreased, resulting in less pollution of the environment. The advantages of these nanocarbon catalysts include high efficiency, environmentally friendly synthesis, eco-friendly, inexpensive, and non-corrodible. In organic transformations, solid metal base/metal-free catalysts produce better results. Here, the metal-free semiconductor g-C₃N₄ was used to demonstrate the catalytic behavior of organic conversions. g-C₃N₄ is a two-dimensional material and a p‑type semiconductor to enhance the photocatalytic activity. The excellent properties of g-C₃N₄ sheet lead to the support of metals to form metal-organic frameworks. Most of the reactions gained positive response under visible light irradiation. This review will inspire readers in widen the applications of g-C₃N₄ based catalyst in various organic transformation reactions.

Construction of Biomass-Derived Hybrid Organogel Electrodes with a Cross-Linking Conductive Network for High-Performance All-Solid-State Supercapacitors

The biomass-based inter-transmission network architecture is expected to act on all-solid-state supercapacitors (ASSSCs) by building excellent conductive paths and achieving high ionic conductivity to promote their development as future electronic devices. Here, biomass-derived hybrid organogel electrodes constructed by incorporating polyaniline (PANI) into cellulose/dealkaline lignin (C/DL) film architectures exhibit an impressive specific capacitance (582 F g^-1 at 1 A g^-1) due to the effective dispersion and doping of PANI. Moreover, the specific capacitance of the best C/DL-PANI electrode is nearly 19 times higher than that of a cellulose-PANI electrode, which is attributed to the contribution of DL to the pseudocapacitance. ASSSCs assembled using the C/DL-PANI electrodes and the DL gel electrolyte exhibit excellent specific capacitance (344 F g^-1 at 1 A g^-1), Coulombic efficiency (∼100% for 5000 cycles), cycle stability (85.7% for 5000 cycles at 1 A g^-1), and energy density (58.1 W h kg^-1 at 0.5 kW kg^-1). The ASSSCs showed a comparable or even higher electrochemical performance than the reported PANI-based or biomass-based ASSSCs, which can be due to the conductive network of the biomass-derived electrodes, the migration of ions between the electrodes through the gel electrolyte ion pathway, and the interfacial synergy. This innovative work paves the way for the development of ASSSC applications based on biomass materials.

Rate Performance Modification of a Lithium-Rich Manganese-Based Material through Surface Self-Doping and Coating Strategies

Lithium-rich manganese-based materials are currently considered to be highly promising cathode materials for next-generation lithium-ion batteries due to their high specific capacity (>250 mA h g^-1) and low cost. A key challenge for the commercialization of these lithium-rich manganese-based materials is their poor rate performance, which is caused by the low electronic conductivity and increasing interface charge transfer resistance produced by the side reaction during the cycling procedure. In this work, we try to improve the rate performance of a lithium-rich manganese-based material Li_1.2Mn_0.54Co_0.13Ni_0.13O₂ using a collaborative approach with Co-doping and Na_xCoO₂-coating methods. Cobalt doping can improve the electronic conductivity, and Na_xCoO₂ coating provides a convenient lithium-ion diffusion channel and moderately alleviates the inevitable decrease in cycling stability caused by cobalt doping. Under the synergistic effect of these two modification strategies, the surface and internal dynamics of the Li_1.2Mn_0.54Co_0.13Ni_0.13O₂ material are enhanced and its rate performance is considerably improved without decay of the cycle stability.