Interfacial Structure and Interfacial Tension in Model Carbon Fiber-Reinforced Polymers

Titanium Dioxide and Calcium Sulfate Whiskers Are Used for the Preparation of High Performance Polypropylene and Reduce White Pollution

The anti-aging agent TiO2-polyacrylonitrile (PAN) and the mechanical strengthening agent CSW-PAN were prepared by radical polymerization using rutile nano-titanium dioxide (TiO2) and anhydrous calcium sulfate whisker (CSW) as raw materials. The structures of TiO2-PAN and CSW-PAN were characterized using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Simultaneously, the mechanical properties, aging properties, and thermal stability of TiO2-PAN/CSW-PAN/polypropylene (PP) composites were studied, and the results showed that the surfaces of nano-titanium dioxide and calcium sulfate whiskers were successfully grafted with acrylonitrile. Owing to the introduction of new elements, such as acrylonitrile, nano-titanium dioxide and calcium sulfate whiskers have anti-aging properties. In comparison of the impact strength and tensile strength of TiO2-PAN/PP and TiO2-PAN/CSW-PAN/PP before aging, it can be proven that adding CSW-PAN can significantly enhance the mechanical properties of TiO2-PAN/CSW-PAN/PP. After 1000 h of aging, the tensile strength of the ternary composite TiO2-PAN/CSW-PAN/PP was 19.88 MPa when the addition amount of TiO2-PAN and CSW-PAN was 3%. Moreover, the impact strength of the ternary composite material TiO2-PAN/CSW-PAN/PP after 1000 h of aging is even better than that of non-aging pure PP materials, proving that the service life of improved PP products is extended, unnecessary waste and environmental pollution can be relieved, and the needs of specific engineering fields can be met.

Probing the Local Near-Field Intensity of Plasmonic Nanoparticles in the Mid-infrared Spectral Region

The enhanced local field of gold nanoparticles (AuNPs) in mid-infrared spectral regions is essential for improving the detection sensitivity of vibrational spectroscopy and mediating photochemical reactions. However, it is still challenging to measure its intensity at subnanometer scales. Here, using the NO2 symmetric stretching mode (νNO2) of self-assembled 4-nitrothiophenol (4-NTP) monolayers on AuNPs as a model, we demonstrated that the percentage of excited νNO2 mode, determined by femtosecond time-resolved sum-frequency generation vibrational spectroscopy, allows us to directly detect the local field intensity of the AuNP surface in subnanometer ranges. The local-field intensity is tuned by AuNP diameters. An approximate 17-fold enhancement was observed for the local field on 80 nm AuNPs compared to the Au film. Additionally, the local field can regulate the anharmonicity of the νNO2 mode by synergistic effect with molecular orientation. This work offers a promising approach to probe the local field intensity distribution around plasmonic NP surfaces at subnanometer scales.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Probing Interfacial Behavior and Antifouling Activity of Adsorbed Copolymers at Solid/Liquid Interfaces

Polymers containing poly(ethylene glycol) (PEG) units can exhibit excellent antifouling properties, which have been proposed/used for coating of biomedical implants, separation membranes, and structures in marine environments, as well as active ingredients in detergent formulations to avoid soil redepositioning in textile laundry. This study aimed to elucidate the molecular behavior of a copolymer poly(MMA-co-MPEGMA) containing antiadhesive PEG side chains and a backbone of poly(methyl methacrylate), at a buried polymer/solution interface. Polyethylene terephthalate (PET) was used as a substrate to model polyester textile surfaces. Sum frequency generation (SFG) vibrational spectroscopy was applied to examine the interfacial behavior of the copolymer at PET/solution interfaces in situ and in real time. Complementarily, copolymer adsorption on PET and subsequent antiadhesion against protein foulants were probed by quartz-crystal microbalance experiments with dissipation monitoring (QCM-D). Both applied techniques show that poly(MMA-co-MPEGMA) adsorbs significantly to the PET/solution interface at bulk polymer solution concentrations as low as 2 ppm, while saturation of the surface was reached at 20 ppm. The hydrophobic MMA segments provide an anchor for the copolymer to bind onto PET in an ordered way, while the pendant PEG segments are more disordered but contain ordered interfacial water. In the presence of considerable amounts of dissolved surfactants, poly(MMA-co-MPEGMA) could still effectively adsorb on the PET surface and remained stable at the surface upon washing with hot and cold water or surfactant solution. In addition, it was found that adsorbed poly(MMA-co-MPEGMA) provided the PET surface with antiadhesive properties and could prevent protein deposition, highlighting the superior surface affinity and antifouling performance of the copolymer. The results obtained in this work demonstrate that amphiphilic copolymers containing PMMA anchors and PEG side chains can be used in detergent formulations to modify polyester surfaces during laundry and reduce deposition of proteins (and likely also other soils) on the textile.

Molecular Behavior of 1K Polyurethane Adhesive at Buried Interfaces: Plasma Treatment, Annealing, and Adhesion

One-part (1K) polyurethane (PU) adhesive has excellent bulk strength and environmental resistance. It is therefore widely used in many fields, such as construction, transportation, and flexible lamination. However, when contacting non-polar polymer materials, the poor adhesion of 1K PU adhesive may not be able to support its outdoor applications. To solve this problem, plasma treatment of the non-polar polymer surface has been utilized to improve adhesion between the polymer and 1K PU adhesive. The detailed mechanisms of adhesion enhancement of the 1K PU adhesive caused by plasma treatment on polymer substrates have not been studied extensively because adhesion is a property of buried interfaces which are difficult to probe. In this study, sum frequency generation (SFG) vibrational spectroscopy was used to investigate the buried PU/polypropylene (PP) interfaces in situ nondestructively. Fourier-transform infrared spectroscopy, the X-ray diffraction technique, and adhesion tests were used as supplemental methods to SFG in the study. The 1K PU adhesive is a moisture-curing adhesive and usually needs several days to be fully cured. Here, time-dependent SFG experiments were conducted to monitor the molecular behaviors at the buried 1K PU adhesive/PP interfaces during the curing process. It was found that the PU adhesives underwent rearrangement during the curing process with functional groups gradually becoming ordered at the interface. Stronger adhesion between the plasma-treated PP substrate and the 1K PU adhesive was observed, which was achieved by the interfacial chemical reactions and a more rigid interface. Annealing the samples increased the reaction speed and enhanced the bulk PU strength with higher crystallinity. In this research, molecular mechanisms of adhesion enhancement of the 1K PU adhesive caused by the plasma treatment on PP and by annealing the PU/PP samples were elucidated.

Improve the Interfacial Properties between Poly(arylene sulfide sulfone) and Carbon Fiber by Double Polymeric Grafted Layers Designed on a Carbon Fiber Surface

Double polymeric grafted layer is constructed by two steps of chemical reaction, in which two polymers had been used, respectively polydopamine (PDA) film and modified PASS (NH₂-PASS) resin containing amine group, as the interphase in carbon fiber reinforced poly(arylene sulfide sulfone) (PASS) composite (CF/PASS) to work on enhancing the interfacial property. All the test results of chemical components and chemical structures on the carbon fiber surface show that the double polymeric grafted layer was constructed successfully with PDA and NH₂-PASS chains. And obvious characteristics of thin PDA film and a polymer layer can be clearly seen in the morphology of modified carbon fiber. In addition to this, the obvious interphase and change in the thickness of interphase have been observed in the modulus distribution images of CF/PASS. The final superb performance is achieved by PASS composites with a double polymeric grafted layer, 27.2% and 198.6% superior to the original PASS composite for IFSS and ILSS, respectively. Moreover, the result also indicates that constructing a double polymeric grafted layer on a carbon fiber surface is a promising technique to modify carbon fiber for processing high-performance advanced thermoplastic composites and is more environmental friendly as well as convenient.

Polyhedral Oligomeric Silsesquioxane Encountering Tannic Acid: A Mild and Efficient Strategy for Interface Modification on Carbon Fiber Composites

Designing and controlling the interfacial chemistry and microstructure of the carbon fiber is an important step in the surface modification and preparation of high-performance composites. To address this issue, a tannic acid (TA)/polyhedral oligomeric silsesquioxane (POSS) hybrid microstructure, similar to the topological structure, is designed on the fiber surface by one-pot synthesis under mild conditions. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) show that the functionality and surface roughness of the fiber are significantly broadened. Correspondingly, the tensile strength (TS) of CF-TA/POSS₁₀₀ and interlaminar shear strength (ILSS) of CF-TA/POSS₁₀₀-based composites increased by 18 and 34%, respectively. Following that, a failure mechanism study is conducted to demonstrate the interphase structure containing TA/POSS, which is quite critical in optimizing the mechanical performance of the multiscale composites. Moreover, the strategy for the use of TA for constructing a robust coating to replace the traditional modification without affecting the fiber intrinsic strength is an improved design and provides a new idea for the development of high-performance composites.

Evidence for a Local Field Effect in Surface Plasmon-Enhanced Sum Frequency Generation Vibrational Spectra

Surface plasmon-enhanced vibrational spectroscopy has been demonstrated to be an important highly sensitive diagnostic technique, but its enhanced mechanism is yet to be explored. In this study, we couple femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) with surface plasmon generated by the excitation of localized gold nanorods/nanoparticles and investigate the plasmonically enhanced factors (EFs) of SFG signals from poly(methyl methacrylate) films. Through monitoring the SFG intensity of carbonyl and ester methyl groups, we have established a correlation between EFs and the coupling of localized surface plasmon resonance with SFG and visible beams. It is found that the total enhanced factor is approximately proportional to the square of an enhanced factor of the SFG electromagnetic field and the fourth power of the enhanced factor of the visible electromagnetic field. The local field effect is roughly expressed to be the square of an enhanced factor of the visible electromagnetic field. This finding will help to guide the experimental design of plasmon-enhanced SFG to drastically improve the detection sensitivity and thus provide greater insight into the ultrafast dynamics near plasmonic surfaces.

Revealing the Molecular Physics of Lattice Self-Assembly by Vibrational Hyperspectral Imaging

Lattice self-assemblies (LSAs), which mimic protein assemblies, were studied using a new nonlinear vibrational imaging technique called vibrational sum-frequency generation (VSFG) microscopy. This technique successfully mapped out the mesoscopic morphology, microscopic geometry, symmetry, and ultrafast dynamics of an LSA formed by β-cyclodextrin (β-CD) and sodium dodecyl sulfate (SDS). The spatial imaging also revealed correlations between these different physical properties. Such knowledge shed light on the functions and mechanical properties of LSAs. In this Feature Article, we briefly introduce the fundamental principles of the VSFG microscope and then discuss the in-depth molecular physics of the LSAs revealed by this imaging technique. The application of the VSFG microscope to the artificial LSAs also paved the way for an alternative approach to studying the structure-dynamic-function relationships of protein assemblies, which were essential for life and difficult to study because of their various and complicated interactions. We expect that the hyperspectral VSFG microscope could be broadly applied to many noncentrosymmetric soft materials.