Pickering Emulsions Simultaneously Stabilized by Starch Nanocrystals and Zein Nanoparticles: Fabrication, Characterization, and Application

Revealing the potential effects of oil phase on the stability and bioavailability of astaxanthin contained in Pickering emulsions: In vivo, in vitro and molecular dynamics simulation analysis

This study investigated the effects of oil phases on the encapsulation rate, storage stability, and bioavailability of astaxanthin (ASTA) in Pickering emulsions (PEs). Results showed PEs of mixed oils (olive oil/edible tea oil) had excellent encapsulation efficiency (about 96.0%) and storage stability of ASTA. In vitro simulated gastrointestinal digestion results showed the mixed oil PE with a smaller interfacial area and higher monounsaturated fatty acid content may play a better role in improving ASTA retention and bioaccessibility. In vivo absorption results confirmed the mixed oil PE with an olive oil/edible tea oil of 7:3 was more favorable for ASTA absorption. Molecular dynamics simulation showed ASTA bound more strongly and stably to fatty acid molecules in the system of olive oil/edible tea oil of 7:3; and van der Waals force was the main binding force. NMR further proved there really were interactions between ASTA and four main fatty acids.

Highly Hydrophilic TiO2 Nanoparticles as Stabilizers of Pickering Emulsions with Photosensitive Lipophilic Compounds: Synthesis and Application

Pickering emulsions are a very promising system for encapsulating and photoprotecting active ingredients. The highest photoprotection efficiency can be achieved when bare TiO2 nanoparticles are used as stabilizers. However, the main problem when using highly hydrophilic TiO2 nanoparticles is their inability to adsorb at the oil-water interface. Here, we developed emulsions stabilized by bare, highly hydrophilic TiO2 nanoparticles for the encapsulation and photoprotection of active lipophilic compounds. Emulsion stabilization occurs due to the formation of hydrogen bonds between hydroxyl groups on the particle surface and the carbonyl groups of the oil molecules. The stability and rheological properties of emulsions are explained by the properties of the initial hydrosols. The resulting Pickering emulsions demonstrated effective UV protection of α-lipoic acid. Our results pave the way for the formulation of Pickering emulsions with a widely used cosmetic oil and show for the first time the possibility of photoprotection of a lipophilic active substance using unmodified TiO2 nanoparticles.

Effective pickering emulsifiers based on submicron carboxymethyl cellulose/chitosan polymer particles

In this study, cross-linked carboxymethyl cellulose/chitosan submicron particles were employed to facilitate the stabilization of Pickering emulsion. The polymer particles were prepared using the polyelectrolyte self-assembly method in conjunction with isocyanide based multicomponent reactions and the characteristics were obtained using: nuclear magnetic resonance, Fourier-transform infrared spectroscopy and dynamic light scattering. Atomic force microscopy revealed the heterogeneous structure of the resulting submicron particles with domains of 20-30 nm in size. The average diameter was found to be in the range of 229-378 nm and they were found to be suitable for the fabrication of oil/water Pickering emulsion when proceeded via the homogenization method followed by sonication. The results obtained revealed that carboxymethyl cellulose/chitosan particles significantly stabilized the droplets at the oil/water interface. Even at low particle concentrations of 0.3 g/L (which is close to that of low molecular weight surfactants) stable Pickering emulsions have been obtained. Additionally, the resulting emulsions showed a high level of stability with regard to changes in pH, temperature and ionic strength. The natural alkaloid piperine was used as a model compound to load the resulting particles, which possessed encapsulation efficiency of 90.6±0.4%. Furthermore, the in vitro release profile of piperine from the Pickering emulsion revealed a much-controlled release in both acidic and neutral media as compared to the unformulated piperine. Additional findings in this work revealed important information on the application of carboxymethyl cellulose/chitosan submicron particles as Pickering stabilizers for creation of new delivery systems.

Progress of Drug Nanocrystal Self-Stabilized Pickering Emulsions: Construction, Characteristics In Vitro, and Fate In Vivo

A drug nanocrystal self-stabilized Pickering emulsion (DNSPE) is a novel Pickering emulsion with drug nanocrystals as the stabilizer. As a promising drug delivery system, DNSPEs have attracted increasing attention in recent years due to their high drug loading capacity and ability to reduce potential safety hazards posed by surfactants or specific solid particles. This paper comprehensively reviews the progress of research on DNSPEs, with an emphasis on the main factors influencing their construction, characteristics and measurement methods in vitro, and fate in vivo, and puts forward issues that need to be studied further. The review contributes to the advancement of DNSPE research and the promotion of their application in the field of drug delivery.

Food LEGO: Building hollow cage and sheet superstructures from starch

The idea of building large structures from small building blocks has had a long history in the human imagination, from the beautifully intricate shells assembled from silica by unicellular algae to the Egyptian pyramids built from stone. Carrying this idea into the food industry has important implications. Here, we introduce a Pickering emulsion platform for building superstructures like hollow cages and sheets using starch granules as building blocks. In food, these superstructures occupy up to six times more space than their constituent parts, thereby delivering a viscosity greater by an order of magnitude than unstructured starch. To achieve this higher viscosity, they use an alternative superstructure mechanism as opposed to the classic swelling mechanism of individual particles. These super-thickeners may reduce calories, cut production costs, and stretch the global food supply, demonstrating how we can design the future by playing with our food.

Fabrication and characterization of a novel zein/pectin/pumpkin seed oil Pickering emulsion and the effects of myricetin on oxidation stability

In this study, zein/pectin/pumpkin seed oil (PSO) Pickering emulsions (ZPPEs) were fabricated loading with myricetin (MYT), and the quality control methods of oxidation stability were innovatively investigated. The microstructure and particle properties of zein-pectin particles were determined. The zein to pectin ratio of 5:3 and oil phase fraction (φ = 50 %) turned out as the most optimal conditions for the stabilization of myricetin-loaded ZPPEs. The expected oil-in-water emulsion-type structure was confirmed by confocal laser scanning microscopy (CLSM). The internal 3D structure of Pickering emulsions (Lugol's solution improved the water-phase contrast) was imaged by micro-computed tomography (Micro-CT) for the first time. Results showed a sponge like structure of water phase in emulsion with 42 μm as mean droplet size. Light-induced oxidation was evaluated with the PetroOxy method and malondialdehyde (MDA) assays. Encapsuling ZPPEs with MYT could prevent the light induced oxidation, especially, loading of MYT at the core of the emulsion. The analysis of Electronic nose (E-nose) was used to analyze the odor before and after UV-induced oxidation, and showed a good discrimination. This study provided a new approach to prepare ZPPEs with high oxidation stability. Micro-CT, PetroOxy and E-nose could be new methods for characterization and quality assessment of Pickering emulsions.

Pickering emulsions stabilized with differently charged particles

For addressing health issues and ecological concerns, the cosmetic and pharmaceutical industries are facing the challenge of designing emulsions without the use of surfactants. Emulsions stabilized by colloidal particles, known as Pickering emulsions, are promising in this matter. In this article, three different types of particles (neutral, anionic and cationic) are used alone or in binary mixtures as stabilizers of Pickering emulsions. The influence of the particles' charge on the emulsions' properties and the synergies between the different types of particles are studied. It is demonstrated that the kinetics of adsorption of the particles at the water/oil interface control the coverage and their organization at the droplet surface, rather than their interactions after adsorption. Binary mixtures of differently charged particles are a powerful way to control the droplet coverage and the particle loading in the emulsions. In particular, the combination of anionic and cationic particles led to smaller droplets and higher particle coverage of emulsion droplets.

Facile solid-phase synthesis of starch-fatty acid complexes via mechanical activation for stabilizing curcumin-loaded Pickering emulsions

Starch-fatty acid complexes used as emulsifiers have caught great attention because of their renewability and excellent emulsifying property, the development of a simple and efficient synthesis method for the fabrication of starch-fatty acid complexes is still greatly challenging. Herein, the rice starch-fatty acid complexes (NRS-FA) were successfully prepared by mechanical activation method using different long chain fatty acids (myristic acid, palmitic acid, and stearic acid) and native rice starch (NRS) as the raw materials. The results showed that the prepared NRS-FA with a V-shaped crystalline structure exhibited a higher digestion resistance than NRS. Moreover, when the chain length of fatty acids increased from 14 to 18 carbons, the contact angle of the complexes was much closer to 90°, and the average particle size was smaller, deriving the better emulsifying property of NRS-FA18 complexes, which were suitable to be used as an emulsifier to stabilize curcumin-loaded Pickering emulsions. The results of storage stability and in vitro digestion showed that the curcumin retention could reach 79.4 % after 28 days of storage and 80.8 % of curcumin was retained in the system after simulated gastric digestion, showing good encapsulation and delivery performance of prepared Pickering emulsions, which attributed to the enhancement of the coverage of particles at the oil-water interface.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

Tartary Buckwheat Starch Modified with Octenyl Succinic Anhydride for Stabilization of Pickering Nanoemulsions

In this study, Tartary buckwheat starch was modified to different degrees of substitution (DS) with octenyl succinate anhydride (OS-TBS) in order to explore its potential for stabilizing Pickering nanoemulsions. OS-TBS was prepared by reacting Tartary buckwheat starch with 3, 5 or 7% (w/v) octenyl succinate in an alkaline aqueous solution at pH 8.5. Fourier-transform infrared spectroscopy gave peaks at 1726 cm−1 (C=O) and 1573 cm−1 (RCOO−), indicating the formation of OS-TBS. We further studied the physicochemical properties of the modified starch as well as its emulsification capacity. As the DS with octenyl succinate anhydride increased, the amylose content and gelatinization temperature of the OS-TBS decreased, while its solubility increased. In contrast to the original Tartary buckwheat starch, OS-TBS showed higher surface hydrophobicity, and its particles were more uniform in size and its emulsification stability was better. Higher DS with octenyl succinate led to better emulsification. OS-TBS efficiently stabilized O/W Pickering nanoemulsions and the average particle size of the emulsion was maintained at 300–400 nm for nanodroplets. Taken together, these results suggest that OS-TBS might serve as an excellent stabilizer for nanoscale Pickering emulsions. This study may suggest and expand the use of Tartary buckwheat starch in nanoscale Pickering emulsions in various industrial processes.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

High internal phase Pickering emulsions stabilized by co-assembled rice proteins and carboxymethyl cellulose for food-grade 3D printing

In this study, high internal phase Pickering emulsions (HIPPEs) stabilized by protein-polysaccharide complexes were used as inks for food-grade three-dimensional printing (3DP). The complexes (RCs) structured by synergistic interactions between rice proteins (RPs) and carboxymethyl cellulose (CMC) displayed outstanding biphasic wettability with excellent ability to reduce the oil/water interfacial tension. The interfacial structures formed by RCs provided a steric barrier and sufficient electrostatic repulsion, preventing droplet coalescence against heating treatment as well as long-term storage. Moreover, the rheological behaviors of the HIPPEs can be tuned by the substitution degree (DS) of CMC for tailorable hydrophobic/hydrophilic properties of RCs, allowing their controllable injectability and printability during 3DP. The HIPPEs stabilized by RCs with a DS 1.2 showed the most favorable printing resolution, hardness, adhesiveness, and chewiness. Associating the hydrophobic RPs with hydrophilic CMC, our study enabled on-demand amphiphilicity of RCs for effective stabilization of HIPPEs that can be manipulated for 3DP.