Impact Dynamics and Freezing Behavior of Surfactant-Laden Droplets on Non-Wettable Coatings at Subzero Temperatures

Measurement Methods for Droplet Adhesion Characteristics and Micrometer-Scale Quantification of Contact Angle on Superhydrophobic Surfaces: Challenges and Opportunities

Inspired by nature, superhydrophobic surfaces have been widely studied. Usually the wettability of a superhydrophobic surface is quantified by the macroscopic contact angle. However, this method has various limitations, especially for precision micro devices with superhydrophobic surfaces, such as biomimetic artificial compound eyes and biomimetic water strider robots. These precision micro devices with superhydrophobic surfaces proposed a higher demand for the quantification of contact angles, requiring contact angle quantification technology to have micrometer-scale measurement capabilities. In this review, it is proposed to achieve micrometer-scale quantification of superhydrophobic surface contact angles through droplet adhesion characteristics (adhesion force and contact radius). Existing contact angle quantification techniques and droplet characteristics' measurement methods were described in detail. The advancement of micrometer-scale quantification technology for the contact angle of superhydrophobic surfaces will enhance our understanding of superhydrophobic surfaces.

Bouncing Regimes of Supercooled Water Droplets Impacting Superhydrophobic Surfaces with Controlled Temperature and Humidity

Superhydrophobic surfaces have shown significant potential for the passive anti-icing application due to their unique water repellency. Reducing the contact time between the impacting droplets and the underlying surfaces with certain textures, especially applying the pancake bouncing mechanism, is expected to eliminate droplet icing upon impingement. However, the anti-icing performance of such superhydrophobic surfaces against the impact of supercooled water droplets has not yet been examined. Therefore, we fabricated a typical post-array superhydrophobic surface (PSHS) and a flat superhydrophobic surface (FSHS), to study the droplet impact dynamics on them with controlled temperature and humidity. The contact time and the bouncing behavior on these surfaces and their dependence on the surface temperature, Weber number, and surface frost were systematically investigated. The conventional rebound and full adhesion were observed on the FSHS, and the adhesion is mainly induced by the penetration of the droplet into the surface micro/nanostructures and the consequent Cassie-to-Wenzel transition. On the PSHS, four distinct regimes including pancake rebound, conventional rebound, partial rebound, and full adhesion were observed, where the contact time increases correspondingly. Over a certain Weber number range, the pancake rebound regime where the droplet bounces off the surface with a dramatically shortened contact time benefits the anti-icing performance. By further decreasing the surface temperature, the pancake rebound turns into the conventional rebound, where the droplet is not levitated after the capillary emptying process. Our scale analysis indicates that the frost between the posts reduces the capillary energy stored during the downward penetration, resulting in the failure of the pancake bouncing. A droplet adheres onto the frosted surface at sufficiently low temperature, especially at larger Weber numbers, on account of the coupling influence of droplet nucleation and wetting transition.

Impact Dynamics of Nanodroplets on V-Shaped Substrates: Asymmetrical Behavior and Fast-Rebound Dynamics

Controlling the drop impact behaviors plays an important role in both designing surface functional materials and improving industrial techniques. Here, the impact dynamics of nanodroplets on "V-shaped" substrates is studied, which is manifested as asymmetrical spreading and retraction behaviors that could be weakened by increasing the angles of the "V" shape, accompanied by the evolution of the shape from leaf-like, stripe-like, to dumbbell-like at v = 20 Å/ps. When v increases to 40 Å/ps, the previously deposited nanodroplets could be transformed to a rebound one at α = 60 and 90°, which is ascribed to the combined effect of the confinement conditions and the extrusion force. Furthermore, an impact behavior map as a function of impact velocity and angle is depicted, which suggests that a decrease in angles or an increase in the impact velocity is likely to cause the nanodroplets to rebound. More importantly, the results give visible evidence that compared to the flat substrates, the V-shaped structure is advantageous for achieving a fast-rebound behavior even at a low speed of impact, which should be good news for practical applications in many multidisciplinary fields, such as self-cleaning, anti-icing/fogging, pollution prevention, energy storage, and so forth.