Controllable Coalescence Dynamics of Nanodroplets on Textured Surfaces Decorated with Well-Designed Wrinkled Nanostructures: A Molecular Dynamics Study

Impact of Droplets on Surfaces Designed with Wettability-Gradient Properties: Directional Migration, Oblique Rebound, and Reduced Contact Time

Efficiently regulating the rebound behavior of droplets post-impact is crucial for various fields, mainly including the development of self-cleaning applications, the design of surface functional materials, and the advancement of industrial techniques. By performing molecular dynamics simulations, we investigated the impact and jumping behavior of droplets on heterogeneous substrates with different wetting regions. We found that, during the impacting evolution process, the retracted droplets would move toward regions with stronger wettability due to the unbalanced force caused by the wettability difference, revealing the directional migration ability. The values of the wettability difference strongly affect the degree of oblique rebound and contact time when droplets can jump off the substrate. We then designed the surfaces with a wettability gradient and found that the oblique rebound angle could be well controlled and the contact time further reduced. Our findings may provide valuable insight into the relationship between the wettability gradient and the behavior of liquid droplets on surfaces, with broad implications for various fields such as surface engineering, materials science, microfluidics, etc.

Programmable Transport of C60 by Straining Graphene Substrate

Controlling the maneuverability of nanocars and molecular machines on the surface is essential for the targeted transportation of materials and energy at the nanoscale. Here, we evaluate the motion of fullerene, as the most popular candidate for use as a nanocar wheel, on the graphene nanoribbons with strain gradients based on molecular dynamics (MD), and theoretical approaches. The strain of the examined substrates linearly decreases by 20%, 16%, 12%, 8%, 4%, and 2%. MD calculations were performed with the open source LAMMPS solver. The essential physics of the interactions is captured by Lennard-Jones and Tersoff potentials. The motion of C60 on the graphene nanoribbon is simulated in canonical ensemble, which is implanted by using a Nose-Hoover thermostat. Since the potential energy of C60 is lower on the unstrained end of nanoribbons, this region is energetically more favorable for the molecule. As the strain gradient of the surface increases, the trajectories of the motion and the C60 velocity indicate more directed movements along the gradient of strain on the substrate. Based on the theoretical relations, it was shown that the driving force and diffusion coefficient of the C60 motion respectively find linear and quadratic growth with the increase of strain gradient, which is confirmed by MD simulations. To understand the effect of temperature, at each strain gradient of substrate, the simulations are repeated at the temperatures of 100, 200, 300, and 400 K. The large ratio of longitudinal speed to the transverse speed of fullerene at 100 and 200 K refers to the rectilinear motion of molecule at low temperatures. Using successive strain gradients on the graphene in perpendicular directions, we steered the motion of C60 to the desired target locations. The programmable transportation of nanomaterials on the surface has a significant role in different processes at the nanoscale, such as bottom-up assembly.

Coalescence-Induced Jumping for Removing the Deposited Heterogeneous Droplets: A Molecular Dynamics Simulation Study

The removal of the deposited droplets on a solid surface is crucial to considerable practical applications that require self-cleaning properties. In this work, a strategy of cleaning a deposited droplet ("D-droplet") by coalescing with a heterogeneous and easily jumping droplet ("J-droplet") is proposed. Molecular dynamics simulation studies have shown that the coalescence of these two kinds of droplets would not guarantee the removal of D-droplet, unless the lifting ability of J-droplet is enhanced through the reduction of the solid-liquid interaction. However, this is a bad scenario with low efficiency. Further investigation suggests that by introducing two J-droplets to produce triple-coalescence dynamics, the D-droplet could be successfully jumping from the substrates due to the coalescence-induced effect, which is also verified by the free energy calculation. Moreover, the effects of the size of the droplets and the arrangement mode of these three droplets on the jumping dynamics are both considered. The studies not only help advance our understanding of coalescence-induced jumping of heterogeneous droplets, but also open up new ways to remove the deposited impure droplets, which is expected to guide the fields of self-cleaning.

Molecular Dynamics Simulation on the Wettability of Nanoscale Wrinkles: High Water Adhesion of Rose Petals

Understanding the high water adhesion of rose petals is of great significance in artificial surface design. With all-atom molecular dynamics simulation, the wettability of nanoscale wrinkles was explored and compared to that of nanoscale strips with favorable hydrophobicity. The dewetting and wetting of gaps between nanoscale structures represent the Cassie-Baxter (CB) and Wenzel (WZ) states of the macroscopic droplet deposited on the textured surface, respectively. We uncovered the intermediate state, which is different from the CB and WZ states for wrinkles. Structures and free-energy profiles of metastable and transition states under various pressures were also investigated. Moreover, free-energy barriers for the (de)wetting transitions were quantified. On this basis, the roles of pressure and the unique structures of nanoscale wrinkles in the high water adhesion of rose petals were identified.

Exploring the Role of Initial Droplet Position in Coalescence-Induced Droplet Jumping: Lattice Boltzmann Simulations

Coalescence-induced droplet jumping on superhydrophobic surfaces with different initial positions was numerically simulated using the 2D multi-relaxation-time (MRT) Lattice Boltzmann method (LBM). Simulation results show that for coalesced droplets with radii close to the structure length scale, the change of initial droplet positions leads to a significant deviation of jumping velocity and direction. By finely tuning the initial droplet positions on a flat-pillared surface, perpendicular jumping, oblique jumping, and non-jumping are successively observed on the same structured surface. Droplet morphologies and vector diagrams at different moments are considered. It is revealed that the asymmetric droplet detachment from the structured surface leads to the directional transport of liquid mass in the droplet and further results in the oblique jumping of the coalesced droplet. In order to eliminate the influence of initial droplet position on droplet jumping probability, a surface with pointed micropillars is designed. It is demonstrated that compared to flat-topped micropillars, a surface with pointed micropillars can suppress the initial droplet position effects and enhance droplet jumping probability. Furthermore, the effect of droplet/structure scale on droplet jumping is investigated. The influence of initial positions on coalescence-induced droplet jumping from the refined surface can be ignored when the droplet scale is larger than three times the structure scale. This study illustrates the role of initial droplet position in coalescence-induced droplet jumping and provides guidelines for the rational design of structured surfaces with enhanced droplet self-shedding for energy and heat transfer applications.

Morphogenesis of Liquid Indium Microdroplets on Solid Molybdenum Surfaces during Solidification at Normal Pressure and under Vacuum Conditions

Electrical and optical applications based on micro- and nanoparticles have specific demands on their interfacial properties. These properties are strongly related to atmospheric conditions to which the particles were exposed during their formation. In this study, metallic In microparticles are synthesized by solidification of In droplets on an amorphous Mo substrate at normal pressure and under vacuum conditions. The influence of ambient pressure on the interface and surface shape is investigated. While solidification at atmospheric pressure leads to collapsed particles with undisturbed contact to the substrate, low pressures result in smooth spherical particles but with cavities inside. Numerical simulations with COMSOL Multiphysics reveal different temperature profiles and heat flux in particles during solidification for both cases. This indicates different starting conditions of the solidification, which leads to the described phenomenon eventually. The investigation of the varying process conditions on the particle shape in combination with the calculated and measured temperature curves over time gives valuable insights into new approaches to synthesize micro- and nanoparticles with defined interfacial properties. Both ambient pressure and cooling rate provide well-controllable and reliable parameters for the realization of different interfacial shapes.

Critical conditions for whether two impacting nanodroplets can coalesce or not: a molecular simulation study

Molecular dynamics simulations are carried out to study impact-induced coalescence behaviors for the first time. When the droplets possess different impact velocities, the big difference between them could induce unconventional coalescence behaviors that exhibit non-synchronous spreading and retraction processes, and thus produce non-coalescence behaviors. At the same impact velocity, the distance of two impacting droplets plays a vital role in their coalescing dynamics. We here present the lower and upper critical values of distance in a map to determine whether two droplets after impacting can coalesce or not, which are highly dependent on the impact velocity. Moreover, simulation studies show that the upper critical value is 2(R_max - R), while the lower critical distance increases with the increase of impact velocity. This work not only helps advance our understanding of the effect of impact dynamics on the coalescence behaviors, but also shows the critical conditions for coalescence and non-coalescence behaviors, which could be considered as a new strategy to control the coalescence by tuning the impact parameters, and are expected to be used for some potential applications.

Impact Dynamics of Nanodroplets on V-Shaped Substrates: Asymmetrical Behavior and Fast-Rebound Dynamics

Controlling the drop impact behaviors plays an important role in both designing surface functional materials and improving industrial techniques. Here, the impact dynamics of nanodroplets on "V-shaped" substrates is studied, which is manifested as asymmetrical spreading and retraction behaviors that could be weakened by increasing the angles of the "V" shape, accompanied by the evolution of the shape from leaf-like, stripe-like, to dumbbell-like at v = 20 Å/ps. When v increases to 40 Å/ps, the previously deposited nanodroplets could be transformed to a rebound one at α = 60 and 90°, which is ascribed to the combined effect of the confinement conditions and the extrusion force. Furthermore, an impact behavior map as a function of impact velocity and angle is depicted, which suggests that a decrease in angles or an increase in the impact velocity is likely to cause the nanodroplets to rebound. More importantly, the results give visible evidence that compared to the flat substrates, the V-shaped structure is advantageous for achieving a fast-rebound behavior even at a low speed of impact, which should be good news for practical applications in many multidisciplinary fields, such as self-cleaning, anti-icing/fogging, pollution prevention, energy storage, and so forth.