Molecular Interactions between Amino Silane Adhesion Promoter and Acrylic Polymer Adhesive at Buried Silica Interfaces

Probing the Saltwater Immersion Effect on Buried Interfacial Structures between a Sealant and Adhesion Promoter at the Molecular Level

In this research, we used sum frequency generation vibrational spectroscopy to investigate the buried interface of a thiol-epoxy model aerospace sealant in contact with a silane-based adhesion promoter (6111) following exposures to 3% saltwater at elevated temperatures and elevated temperatures alone. The results suggest that the saltwater caused a change at the interface between the adhesion promoter and sealant, while an elevated temperature of 60 °C itself did not affect the interfacial structure noticeably. Model hydrolyzed and nonhydrolyzed silanes were also used in the study to compare with the adhesion promoter 6111 to understand the interfacial behavior of main silane components in 6111 as well as their potential role in adhesion. The amino silane in 6111 likely segregates more at the sealant/adhesion promoter interface and interacts with the sealant compared to the vinyl silane. The results imply that the saltwater immersion process led to the disordering of the adhesion promoter/sealant interface (caused by interfacial structural randomization), which could potentially have implications for adhesion.

Quantifying Chemical Reactions and Interfacial Properties at Buried Polymer/Polymer Interfaces

Maleic anhydride (MAH)-modified polymers are used as tie layers for binding dissimilar polymers in multilayer polymer films. The MAH chemistry which promotes adhesion is well characterized in the bulk; however, only recently has the interfacial chemistry been studied. Sum frequency generation vibrational spectroscopy (SFG) is an interfacial spectroscopy technique which provides detailed information on interfacial chemical reactions, species, and molecular orientations and has been essential for characterizing the MAH chemistry in both nylon and ethyl vinyl alcohol copolymer (EVOH) model systems and coextruded multilayer films. Here, we further characterize the interfacial chemistry between MAH-modified polyethylene tie layers and both EVOH and nylon by investigating the model systems over a range of MAH concentrations. We can detect the interfacial chemical reaction products between MAH and the barrier layer at MAH concentrations of ≥0.022 wt % for nylon and ≥0.077 wt % for EVOH. Additionally, from the concentration-dependent reaction reactant/product SFG peak positions and the product imide or ester/acid C═O group tilt angles extracted from the polarization-dependent SFG spectra, we quantitatively observe concentration-dependent changes to both the interfacial chemistry and interfacial structure. The interfacial chemistry and molecular orientation as a function of MAH concentration are well correlated with the adhesion strength, providing important quantitative information for the future design of MAH-modified tie layers for a variety of important applications.

Functionalization of bamboo fibers with lawsone dye (Lawsonia inermis) to produce bioinspired hybrid color composite with antibacterial activity

There is great interest in using eco-friendly functional colorants with antibacterial activity to produce colorful textile and plastic products. In this study, we designed, produced, and analyzed a novel multifunctional hybrid color composite colorant with antimicrobial properties, prepared from plant-based products. The new functional color composite was prepared by stabilizing lawsone dye onto amino-silanized cellulose from bamboo fibers. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy were performed to examine the possible interactions between the lawsone dye and silanized bamboo fibers. The color performance, morphology, chemical stability, and thermal stability of the prepared color composite were evaluated using scanning electron microscopy (SEM), UV-Vis spectrophotometry, and thermogravimetric analysis (TGA). The results were compared to those for pure lawsone dye. Modification of amino-silanized bamboo fibers with lawsone dye led to the formation of a light brown colorant that is more resistant to organic solvents (e.g. acetone, ethanol) and elevated temperatures than raw natural dye. Importantly, the designed bamboo fiber/lawsone system (BF-APTES-L) benefits from the synergistic combination of lawsone and bamboo fibers, showing strong antibacterial activity compared to the control sample of bamboo-as evidenced by noticeably inhibited growth of E. coli, S. aureus, and B. subtilis.

Silane Effects on Adhesion Enhancement of 2K Polyurethane Adhesives

With excellent properties such as great flexibility, outstanding chemical resistance, and superb mechanical strength, two-part polyurethane (2K PU) adhesives have been widely applied in many applications, including those in transportation and construction. Despite the extensive use, their adhesion to nonpolar polymer substrates still needs to be improved and has been widely studied. The incorporation of silane molecules and the use of plasma treatment on substrate surfaces are two popular methods to increase the adhesion of 2K PU adhesives, but their detailed adhesion enhancement mechanisms are still largely unknown. In this research, sum frequency generation (SFG) vibrational spectroscopy was used to probe the influence of added or coated silanes on the interfacial structure at the buried polypropylene (PP)/2K PU adhesive interface in situ. How plasma treatment on PP could improve adhesion was also investigated. To achieve maximum adhesion, two methods to involve silanes were studied. In the first method, silanes were directly mixed with the 2K PU adhesive before use. In the second method, silane molecules were spin-coated onto the PP substrate before the PU adhesive applied. It was found that the first method could not improve the 2K PU adhesion to PP, while the second method could substantially enhance such adhesion. SFG studies demonstrated that with the second method silane molecules chemically reacted at the interface to connect PP and 2K PU adhesive to improve the adhesion. With the first method, silane molecules could not effectively diffuse to the interface to enhance adhesion. In this research, plasma treatment was also found to be a useful method to improve the adhesion of the 2K PU adhesive to nonpolar polymer materials.

Antiadhesive Copolymers at Solid/Liquid Interfaces: Complementary Characterization of Polymer Adsorption and Protein Fouling by Sum Frequency Generation Vibrational Spectroscopy and Quartz-Crystal Microbalance Measurements with Dissipation Monitoring

Amphiphilic copolymers comprising hydrophilic segments of poly(ethylene glycol) and hydrophobic domains that are able to adhere to solid/liquid interfaces have proven to be versatile ingredients in formulated products for various types of applications. Recently, we have reported the successful synthesis of a copolymer designed for modifying the surface properties of polyesters as mimics for synthetic textiles. Using sum frequency generation (SFG) spectroscopy, it was shown that the newly developed copolymer adsorbs effectively on the targeted substrates even in the presence of surfactants as supplied by common detergents. In the present work, these studies were extended to evaluate the ability of the formed copolymer adlayers to passivate polyester surfaces against undesired deposition of bio(macro)molecules, as represented by fibrinogen as model protein foulants. In addition, SFG spectroscopy was used to elucidate the structure of fibrinogen at the interface between polyester and water. To complement the obtained data with an independent technique, analogous experiments were performed using quartz-crystal microbalance with dissipation monitoring for the detection of the relevant interfacial processes. Both methods give consistent results and deliver a holistic picture of brush copolymer adsorption on polyester surfaces and subsequent antiadhesive effects against proteins under different conditions representing the targeted application in home care products.

Electrochemical Deposition of Polypyrrole in the Presence of Silanes as Adhesion Promoters

Polypyrrole adhesion to indium-tin oxide electrodes was improved by adding pre-hydrolyzed alkoxysilanes to the electrodeposition media. The pyrrole oxidation and film growth rates were studied by potentiostatic polymerization in acidic media. The morphology and thickness of the films were studied by contact profilometry and surface-scanning electron microscopy. The bulk and surface semiquantitative chemical composition was studied by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Finally, the adhesion was studied by scotch-tape adhesion test, where both alkoxysilanes showed a significant improvement in adhesion. We proposed a hypothesis for the improvement in adhesion, that involves the formation of siloxane material as well as in situ surface modification of the transparent metal oxide electrode.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Molecular Behavior of 1K Polyurethane Adhesive at Buried Interfaces: Plasma Treatment, Annealing, and Adhesion

One-part (1K) polyurethane (PU) adhesive has excellent bulk strength and environmental resistance. It is therefore widely used in many fields, such as construction, transportation, and flexible lamination. However, when contacting non-polar polymer materials, the poor adhesion of 1K PU adhesive may not be able to support its outdoor applications. To solve this problem, plasma treatment of the non-polar polymer surface has been utilized to improve adhesion between the polymer and 1K PU adhesive. The detailed mechanisms of adhesion enhancement of the 1K PU adhesive caused by plasma treatment on polymer substrates have not been studied extensively because adhesion is a property of buried interfaces which are difficult to probe. In this study, sum frequency generation (SFG) vibrational spectroscopy was used to investigate the buried PU/polypropylene (PP) interfaces in situ nondestructively. Fourier-transform infrared spectroscopy, the X-ray diffraction technique, and adhesion tests were used as supplemental methods to SFG in the study. The 1K PU adhesive is a moisture-curing adhesive and usually needs several days to be fully cured. Here, time-dependent SFG experiments were conducted to monitor the molecular behaviors at the buried 1K PU adhesive/PP interfaces during the curing process. It was found that the PU adhesives underwent rearrangement during the curing process with functional groups gradually becoming ordered at the interface. Stronger adhesion between the plasma-treated PP substrate and the 1K PU adhesive was observed, which was achieved by the interfacial chemical reactions and a more rigid interface. Annealing the samples increased the reaction speed and enhanced the bulk PU strength with higher crystallinity. In this research, molecular mechanisms of adhesion enhancement of the 1K PU adhesive caused by the plasma treatment on PP and by annealing the PU/PP samples were elucidated.

Enhanced Sum Frequency Generation for Monolayers on Au Relative to Silica: Local Field Factors and SPR Effect

Using metals as signal magnified substrates, surface plasmon-enhanced sum frequency generation (SFG) vibrational spectroscopy is a promising technique to probe weak molecular-level signals at surfaces and interfaces. In this study, the vibrational signals of the n-alkane monolayer on the gold (Au) and silica substrates are investigated using the broadband femtosecond SFG. The enhancement factors are discovered to be up to ∼1076 and ∼31 for the methyl symmetric and asymmetric stretching (ss and as) modes of the monolayer, respectively. By systematically analyzing the second-order nonlinear susceptibility tensor components (χ_ijks), the Fresnel coefficients (F_ijks), and the surface plasmon resonance (SPR) effect, we find that the interplay between F_ijk and χ_ijk terms and the SPR effect dominate the SFG signal enhancement. Our study reveals that the relative contributions of different influencing factors (i.e., Fresnel coefficients and SPR) to the SFG signal enhancement provide an approach to interpreting enhanced SFG vibrational signals detected from probe molecules on distinct substrates and may finally guide the design of the experimental methodology to improve the detection sensitivity and signal-to-noise ratio.

Elucidating the Molecular Structure of Hydrophobically Modified Polyethylenimine Nanoparticles and Its Potential Implications for DNA Binding

The structural properties of the polyethylenimine (PEI) polymer are generally tuned and selectively modified to reinforce its potential in a broad spectrum of applied domains of medicine, healthcare, material design, sensing, and electronic optimization. The selective modification of the polymer brings about changes in its interfacial characteristics and behavior. The current work involves the synthesis of naphthalimide conjugated polyethylenimine organic nanoparticles (NPEI-ONPs). The interfacial molecular structure of NPEI-ONPs is explored in an aqueous medium at pH 7.4 using surface tensiometry and sum-frequency generation vibrational spectroscopy (SFG-VS). The hydrophobic functionalization rendered a concentration-dependent surface coverage of NPEI-ONPs, where the SFG-VS analysis exhibited the molecular rearrangement of its hydrophobic groups at the interface. The interaction of NPEI-ONPs with double-stranded DNA (dsDNA) is carried out to observe the relevance of the synthesized nanocomposites in the biomedical domain. The bulk-specific studies (i.e., thermal denaturation, viscometry, zeta (ζ) potential, and ATR-FTIR) reveal the condensation of dsDNA in the presence of NPEI-ONPs, making its structure more compact. The interface-sensitive SFG-VS showcased the impact of the dsDNA and NPEI-ONP interaction on the interfacial molecular behavior of NPEI-ONPs at the air-aqueous interface. Our results exhibit the potential of such hydrophobically functionalized ONPs as promising candidates for developing biomedical sealants, substrate coatings, and other biomedical domains.