Fabrication of Chitosan-Loaded Multifunctional Wool Fabric for Reactive Dye Digital Inkjet Printing by Schiff Base Reaction

Development of Binder-Free Pigment Inks for Direct Inkjet Printing on Cotton Fabric without Pretreatment

Inkjet printing technology is widely used in the textile digital printing application today though the current technology still requires pretreatment and postwashing procedures before and after printing. Additional chemical treatment generates a large amount of wastewater and complicates the process. Among the many potential approaches for reducing chemical waste, pigments with self-dispersing capability were prepared and formulated into binder-free inkjet inks that require no pretreatment or after-washing process when printing cotton fabrics. The new self-dispersing pigment inks were tested and evaluated on cotton fabrics. The distribution of particles was between 122.2 and 188.5 nm, and inks have excellent storage capability. Printed fabrics' light fastness and acid/alkali resistance are about grade 5, and printed cotton's washing and rubbing fastness are above grade 3. The mechanism and performance of ink drops were investigated by LF-NMR and ink-drop observation methods. This work provides a possible solution for reducing wastewater in the textile industry.

Single-Step Fabrication of a Dual-Sensitive Chitosan Hydrogel by C-Mannich Reaction: Synthesis, Physicochemical Properties, and Screening of its Cu2+ Uptake

Uncovering the value of waste materials is one of the keys to sustainability. In this current work, valorization of chitosan was pursued to fabricate a novel modified chitosan functional hydrogel using a process-efficient protocol. The fabrication proceeds by a one-pot and single-step C-Mannich condensation of chitosan (3% w/v), glutaraldehyde (20 eq.), and 4-hydroxycoumarin (40 eq.) at 22 °C in 3% v/v acetic acid. The Mannich base modified chitosan hydrogel (CS-MB) exhibits a dual-responsive swelling behavior in response to pH and temperature that has not been observed in any other hydrogel systems. Combining the pre-defined optimal swelling pH (pH = 4) and temperature (T = 22 °C), the CS-MB was screened for its Cu2+ adsorption capacity at this condition. The CS-MB achieved an optimal adsorption capacity of 12.0 mg/g with 1.2 g/L adsorbent dosage after 36 h with agitation. The adsorption of Cu2+ on the surface of CS-MB was verified by EDS, and an overview of the adsorption sites was exhibited by FT-IR. The simply fabricated novel CS-MB hydrogel under investigation presents a unique response to external stimuli that exhibits a promise in heavy metal removal from aqueous media.