Fast Electrically Driven Capillary Rise Using Overdrive Voltage

Effects of Frequency and Joule Heating on Height Rise between Parallel Electrodes with AC Electric Fields

High strength AC electric fields generate a body force on a dielectric medium confined between two electrodes. The body forces are due to two factors. First is the variation in permittivity across an interface such as liquid-air present between the electrodes. The second is a change in the dielectric property of the medium due to a variation in the thermodynamic properties such as temperature. The height rise of a dielectric medium between two electrodes is one of the consequences of these electrical body forces and is used here as a comparatively simple way to study these forces. In an aqueous solution with finite conductivity, the effects of the frequency of the supplied voltage source and the temperature change due to Joule heating on height rise have never been studied in this context. This study focuses on systems where the contributions of surface forces are negligible and highlights the interplay between solution conductivity, applied electric field, and the solution height/temperature behavior. Using a generic thermodynamic model for an aqueous solution under the application of an alternating current electric field, it is shown that for low conductivity solutions the resulting temperature and height rise change weakly with the applied field frequency and strongly with the applied electric field. For higher conductivity solutions, the behavior becomes more complex with respect to the electric field strength. As compared to Pellat's original model, the height rise varies from strongly suppressed to enhanced.

Experimental, Theoretical, and Numerical Investigation of the Electric Field and Surface Wettability Effects on the Penetration Length in Capillary Flow

This study addressed the dynamics of capillary-driven flow for different surface wettabilities by concentrating on the influence of electric potential. The capillary flow dynamics were investigated by varying the wettability (plasma-treated, hydrophobic, hydrophilic, and superhydrophilic) of a capillary surface, and the applied electric potential to the liquid ranged from 0 to 500 V. When an electric potential was applied to the liquid, the fluid flow penetration length increased by 30-50% due to the electrohydrodynamic (EHD)-driven flow by the Maxwell (electric) pressure gradient effect. The results showed that the EHD effect enhanced the fluid penetration through narrow gaps. The maximum fluid penetration was attained for every surface at 500 V, particularly for the superhydrophilic surface, which exhibited the highest value. The combined effect of the electric field and wettability resulted in an enhanced fluid penetration speed, reducing the underfill time. In addition, theoretical and numerical models were developed for comparison with the experimental results. The proposed models reinforce the observed fluid flow phenomenon on various surfaces under the influence of an electric field. These findings can provide alternative strategies for controlling the dynamic features of capillary imbibition by introducing an electric field and wettability effects, which has practical implications in flip-chip packaging, microfluidic devices, and the manipulation of biocells.

Polarization mechanisms of dielectric materials at a binary liquid interface: impacts on electrowetting actuation

We explored polarization mechanisms at the interface between a dielectric material (an electrolyte) and an insulating liquid, during electrowetting actuation. Native surface charge density due to hydrophobic coating has been measured as an offset voltage for which the contact angle is at its minimum. Surface charge densities as low as 0.023 mC m^-2 have been measured using this method, demonstrating that electrowetting can be used as a probe to measure native surface charge density. This effect strongly differs depending on the kind of polarization and is at the origin of major discrepancies between alternative and direct polarization during electrowetting actuation. A new model describing electrowetting actuation is also proposed, leading to a more predictive description as well as useful recommendations on materials to obtain a stable actuation under DC polarization.

Enhanced Response Time of Electrowetting Lenses with Shaped Input Voltage Functions

Adaptive optical lenses based on the electrowetting principle are being rapidly implemented in many applications, such as microscopy, remote sensing, displays, and optical communication. To characterize the response of these electrowetting lenses, the dependence upon direct current (DC) driving voltage functions was investigated in a low-viscosity liquid system. Cylindrical lenses with inner diameters of 2.45 and 3.95 mm were used to characterize the dynamic behavior of the liquids under DC voltage electrowetting actuation. With the increase of the rise time of the input exponential driving voltage, the originally underdamped system response can be damped, enabling a smooth response from the lens. We experimentally determined the optimal rise times for the fastest response from the lenses. We have also performed numerical simulations of the lens actuation with input exponential driving voltage to understand the variation in the dynamics of the liquid-liquid interface with various input rise times. We further enhanced the response time of the devices by shaping the input voltage function with multiple exponential rise times. For the 3.95 mm inner diameter lens, we achieved a response time improvement of 29% when compared to the fastest response obtained using single-exponential driving voltage. The technique shows great promise for applications that require fast response times.