Electrostatic Stabilization of Graphene in Organic Dispersions

Properties of a Dental Adhesive Containing Graphene and DOPA-Modified Graphene

Graphene is a promising biomaterial. However, its dispersion in aqueous medium is challenging. This study aimed to modify graphene nanoparticles with L-dopa to improve the properties of experimental dental adhesives. Adhesives were formulated with 0% (control), 0.25%, 0.5%, and 0.75% of graphene, modified or not. Particle modification and dispersion were microscopically assessed. Degree of conversion was tested by Fourier-transform infrared spectroscopy. Flexural strength and modulus of elasticity were evaluated by a 3-point flexural test. Bond strength was tested by shear. To test water sorption/solubility, samples were weighed during hydration and dehydration. Antibacterial activity was tested by Streptococcus mutans colony-forming units quantification. Cytotoxicity on fibroblasts was evaluated through a dentin barrier test. The modification of graphene improved the particle dispersion. Control presented the highest degree of conversion, flexural strength, and bond strength. In degree of conversion, 0.25% of groups were similar to control. In bond strength, groups of graphene modified by L-dopa were similar to Control. The modulus of elasticity was similar between groups. Cytotoxicity and water sorption/solubility decreased as particles increased. Compared to graphene, less graphene modified by L-dopa was needed to promote antibacterial activity. By modifying graphene with L-dopa, the properties of graphene and, therefore, the adhesives incorporated by it were enhanced.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Study of Molecular-Level Dispersion of Pristine Graphene in Aqueous Media via Polyvinyl Alcohol Coil Physisorption

Graphene has been widely used as a nanofiller in advanced electronic devices and nanocomposite materials to achieve enhanced electronic, mechanical, and barrier properties. Adequate polymers play the role of the composite matrix and can assist in the liquid-phase exfoliation of pristine graphene without any heavy chemical modification and the detriment of the properties of graphene. This stabilization mechanism is generally attributed to the steric forces formed between the polymer-adsorbed adsorbent. However, the key influence of the polymer concentration on the maximum graphene content in the colloidal solutions is still unclear. In this study, three different molar weights of water-soluble polyvinyl alcohol (PVA) were used for graphene dispersion. The influence of the PVA concentration on the graphene dispersion was systematically studied. Based on Flory's theory, we first proposed a model to describe the polymer adsorption process in the graphene/PVA/water ternary system in the "dilute" regime and simulated the adsorption-free energy changes during this transformation. This model is in good agreement with the experimental results and explains the critical polymer concentration, C_c, allowing the optimization of the graphene/polymer ratio. This fundamental understanding of polymer physisorption on 2D materials provides a simple method for producing nanocomposites with controlled nanosheet/polymer ratios and structures, which are of great interest for energy devices and biomaterials.

Graphene Nanosheets as Lubricant Additives: Effects of Nature and Size on Lubricating Performance

Graphene has been widely investigated as an additive in lubricating oils to enhance their tribological performance. Here, the effects of the nature and size of the graphene nanosheets on the tribological performance were investigated with the hydrogenated hydroxyl-terminated polybutadiene dioctoate (O-HHTPB-O) as a model base oil after alkylation of the graphene oxide (GO) of different sizes with 1-dodecylamine (DA) and reduction. The 1-dodecylamine-modified graphene oxide (DA-GO) showed better dispersibility in the O-HHTPB-O base oil and subsequently better tribological performance than the reduced one (DA-rGO) for both the larger graphene oxide nanosheets (GO_L) and the smaller graphene oxide nanosheets (GO_S). The DA-GO_S exhibited better wear-reduction performance than the DA-GO_L, owing to its smaller size and higher polarity. Although the DA-GO_L could be ground during the friction, the friction and wear in the original period affected the complete period lubricating performance.

Comparison of oxygen-free graphene sheets obtained in DMF and DMF-aqua media

In pure DMF, the graphene layering is mainly limited to 5 layers; in the aqua presence, partial association of the lightest graphene sheets with the highest surface energy occurs.

The mechanisms and environmental implications of engineered nanoparticles dispersion

Dispersion of engineered nanoparticles (ENPs) has drawn special research attentions because the environmental behavior, risks, and applications of ENPs are greatly dependent on their dispersing status. This review summarizes the latest research progress of dispersion mechanisms, environmental applications in contaminants adsorption, and toxicity of ENPs dispersed in liquid and in solid matrix (3D-ENPs). Dispersion mechanisms of ENPs, including steric hindrance, electrostatic repulsion and "micelle wrapping" are well understood in single dispersing agent, however, the prediction of ENPs dispersion in real environments is not straightforward because of the diversity of structures, components, and properties of natural organic molecule mixtures. The adsorption characteristics, depending on the exposed surface areas in liquid, are significantly different between dispersed and aggregated ENPs. Comparing with the aggregated ENPs, the toxicity of dispersed ENPs is generally enhanced due to the increased uptake, released metal ions, carried contaminants, and induced ROS. 3D-ENPs not only inherit the excellent adsorption performance of ENPs dispersed in liquid, but also are beneficial to the separation and recycle from aqueous solutions due to their 3D rigid structures. However, the adsorption mechanisms as affected by environmental conditions are still unclear. Additionally, the potential risks of 3D-ENPs should be paid more attentions, with an emphasis on free radicals and stability of 3D structure.

Colloidal stability of graphene oxide nanosheets in association with triblock copolymers: A neutron scattering analysis

This study investigates stabilization of graphene oxide (GO) nanosheets in polyethylene oxide-polypropylene oxide (PEO-PPO) block copolymers (P103, P123 and F127). Changes in micellization of copolymers upon GO addition were monitored using dynamic light (DLS) and small angle neutron scattering (SANS). Structural developments at sheet surface were studied with two possibilities; (i) adsorption of PPO block over hydrophobic basal plane allowing the engagement of hydrophilic PEO with aqueous bulk, and (ii) adsorption of micelles mediated via carboxylated groups. Insignificant changes in micellar parameters for P123 and P127 were indicative of their inferior interaction with GO. On the other hand, P103 micelles exhibited high affinity for sheets, noticeable as emergence of mass fractals and more than two-fold enhancement in micelle number density. The latter allowed coverage of entire surface with P103 micelles. Existence of mass fractals was verified by extracting the form and structure factors from the fitted SANS data. Spectroscopic and thermogravimetric analyses illustrated non-covalent adsorption of copolymer aggregates. It was interesting to note that the dispersion remained stable against protein and electrolyte addition. A comprehensive understanding on colloidal stability can be valuable for drug delivery applications of GO sheets.

A study on amphiphilic fluorinated block copolymer in graphite exfoliation using supercritical CO2 for stable graphene dispersion

In this study, poly(2,2,2-trifluoroethyl methacrylate)-block-poly(4-vinylpyridine) (PTFEMA-b-PVP) was synthesized by stepwise reversible addition-fragmentation chain transfer (RAFT) polymerization for the preparation of graphene by the exfoliation of graphite nanoplatelets (GPs) in supercritical CO₂ (SCCO₂). Two different block copolymers (low and high molecular weights) were prepared with the same block ratio and used at different concentrations in the SCCO₂ process. The amount of PTFEMA-b-PVP adsorbed on the GPs and the electrical conductivity of the SCCO₂-treated GP samples were evaluated using thermogravimetric analysis (TGA) and four-point probe method, respectively. All GP samples treated with SCCO₂ were then dispersed in methanol and the dispersion stability was investigated using online turbidity measurements. The concentration and morphology of few-layer graphene stabilized with PTFEMA-b-PVP in the supernatant solution were investigated by gravimetry, scanning electron microscopy, and Raman spectroscopy. Destabilization study of the graphene dispersions revealed that the longer block copolymer exhibited better affinity for graphene, resulting in a higher yield of stable graphene with minimal defects.

Ultra-low voltage electrowetting using graphite surfaces

The control of wetting behaviour underpins a variety of important applications from lubrication to microdroplet manipulation. Electrowetting is a powerful method to achieve external wetting control, by exploiting the potential-dependence of the liquid contact angle with respect to a solid substrate. Addition of a dielectric film to the surface of the substrate, which insulates the electrode from the liquid thereby suppressing electrolysis, has led to technological advances such as variable focal-length liquid lenses, electronic paper and the actuation of droplets in lab-on-a-chip devices. The presence of the dielectric, however, necessitates the use of large bias voltages (frequently in the 10-100 V range). Here we describe a simple, dielectric-free approach to electrowetting using the basal plane of graphite as the conducting substrate: unprecedented changes in contact angle for ultra-low voltages are seen below the electrolysis threshold (50° with 1 V for a droplet in air, and 100° with 1.5 V for a droplet immersed in hexadecane), which are shown to be reproducible, stable over 100 s of cycles and free of hysteresis. Our results dispel conventional wisdom that reversible, hysteresis-free electrowetting can only be achieved on solid substrates with the use of a dielectric. This work paves the way for the development of a new generation of efficient electrowetting devices using advanced materials such as graphene and monolayer MoS₂.

Non-oxidative, controlled exfoliation of graphite in aqueous medium

We present a simple, non-oxidative and controlled method to synthesize graphene monolayers by exfoliation in water from different solid carbon sources, such as highly ordered pyrolytic graphite and low density graphite. Any water based method is highly desirable due to several attractive features, such as environmental friendliness, low cost and wide compatibility with other water based processes. We show that thin graphene layers can be exfoliated controllably and reproducibly by varying different parameters during exfoliation in aqueous medium. It has been possible to obtain high quality graphene monolayers with a yield of ∼2.45 wt%, which can be increased up to 16.6 wt% by recycling the sediments. Field effect transistors based on exfoliated graphene monolayers have shown n-type doping and a high carrier mobility of 4500 cm(2) V(-1) s(-1) at room temperature and ∼20 000 cm(2) V(-1) s(-1) at low temperature. Density functional calculations corroborate the infrared spectroscopic results and also indicate that the charge transfer preferentially occurs from water molecules to the graphene sheets resulting in n-type doping. We anticipate that exfoliation of high quality graphene layers in aqueous medium would open up a pathway for various graphene based electronic and biological applications.