Designing CuOx Nanoparticle-Decorated CeO2 Nanocubes for Catalytic Soot Oxidation: Role of the Nanointerface in the Catalytic Performance of Heterostructured Nanomaterials

Mechanistic insights into NH3-assisted selective reduction of NO on CeO2: a first-principles microkinetic study on selectivity and activity

To understand the activity- and selectivity-limiting factors of selective catalytic reduction of NO with NH3 (NH3-SCR) catalyzed by CeO2-based oxides, a molecular-level mechanistic exploration was performed on CeO2(110) using a first-principles microkinetic study. Herein, the favored reaction pathway for N2 formation on CeO2(110) is unveiled, which includes three key subprocesses. (i) NH3 adsorbs on the Cecus site and dissociates into *NH2 assisted by Olat; (ii) *NH2 preferentially couples with NO adsorbed on Olat (ONO#), forming *NH2NO on the Cecus site; (iii) *NH2NO undergoes dehydrogenation into *NHNO, which can be easily anchored by Ovac and can then decompose into N2. The quantitative microkinetic results show that the transfer of NHNO from Cecus to Ovac, rather than the further conversion of N2O to N2 on Ovac, emerges as the N2 selectivity-determining step on CeO2, in which Ovac plays a key role. The number of Ovac is an important factor determining the N2 selectivity of CeO2-based catalysts. The sensitivity analysis reveals that NH2NO formation, i.e., *NH2 + ONO# → *NH2NO + O#, is the rate-determining step for NH3-SCR on the CeO2 catalyst; accordingly, enhancing NH3 adsorption could be an effective strategy to boost the catalytic activity of CeO2 for NH3-SCR. In general, creating Ovac on CeO2 and introducing components (e.g., WO3) with strong NH3 adsorption would be efficient for designing CeO2-based catalysts with superior N2 selectivity and activity. These results could provide a consolidated theoretical basis for understanding and optimizing CeO2-based catalysts for NH3-SCR.

Hydroxyls on CeO2 Support Promoting CuO/CeO2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. In this study, we report the preparation and application of a novel CuO/CeO2 catalyst using a hydroxyl-rich Ce(OH)x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO2 support, the new CuO/CeO2 catalyst prepared from the OH-rich Ce(OH)x (CuO/CeO2-OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO2 support on the catalytic performance and physicochemical properties of the CuO/CeO2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuOx dispersion on CeO2, increased the CuOx-CeO2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO2-OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH)x is a superior support for the preparation of highly efficient metal catalysts for different applications.

Unveiling the Surface Chemical Reactions during Multi-Phase Catalytic Oxidation of Soot on Nanoengineering/Interfacing/Doping-Prepared Mn-CeO2 Catalysts Using TG-MS and Operando DRIFTS-MS

The aerosol pyrolysis method from nitrate precursors was used to prepare the Mn-CeO2 catalyst containing Mn2O3, CeO2, and Mn-doped CeO2 nanoparticles for catalyzing carbonous soot oxidation. The prepared Mn-CeO2 catalysts have high specific surface areas, Ce3+ ratio, and oxygen vacancy defects; these are a benefit for soot oxidation. The T50 for soot oxidation on the 0.57Mn-CeO2 catalyst is as low as 355 °C, which is 329 °C lower than that for soot oxidation without a catalyst. The catalysts were characterized using XRD, SEM-EDS, HRTEM, XPS, Raman spectroscopy, H2-TPR-MS, O2-TPD-MS, soot-TPR-MS, and operando DRIFTS-MS. The functions of Mn2O3, CeO2, and Mn-doped CeO2 in the 0.57Mn-CeO2 catalyst are unveiled. Mn-doped CeO2 plays a key role and CeO2 participates in soot oxidation, while Mn2O3 is used to enhance higher ratios of Ce3+, via the reaction of Mn3+ + Ce4+ = Mn4+ + Ce3+. The mechanism of soot oxidation on Mn-CeO2 was proposed.

Low-Temperature Plasma-Assisted Catalytic Dry Reforming of Methane over CeO2 Nanorod-Supported NiO Catalysts in a Dielectric Barrier Discharge Reactor

Nonthermal plasma (NTP)-assisted catalytic dry reforming of methane (DRM) is considered a powerful single-stage reaction mechanism because of its ability to activate normally stable CO2 and CH4 at a low temperature under ambient conditions. The thermodynamic barrier of DRM requires a high operating temperature (>700 °C), which can be reduced by nonequilibrium plasma. Herein, we present a method for the wet-impregnation synthesis of CeO2 nanorod (NR)-supported 5 and 15 wt % NiO catalysts for efficient NTP-promoted DRM with an applied power in the range of 24.9-25.8 W (frequency: 20 kHz), a CH4:CO2 feed gas ratio of 100:250 sccm, and a total flow rate of 350 sccm. The presence of NTP dramatically increased the reaction activity, even at 150 °C, which is usually inaccessible for thermally catalyzed DRM. The CH4 and CO2 conversion reaches a maximum of 66 and 48%, respectively, at 500 °C with the 15 wt % NiO/CeO2 NR catalyst, which are much higher than the values obtained for the 5 wt % NiO/CeO2 NR catalyst under the same conditions. According to the X-ray photoelectron spectroscopy profile for 15 wt % NiO/CeO2 NR, a higher concentration of NiO on CeO2 increases the proportion of Ce3+ in the catalyst, suggesting enhanced oxygen vacancy concentration with an increased amount of NiO loading. Additionally, a higher NiO loading promotes a higher rate of replacement of Ce4+ with Ni2+, which generates more oxygen vacancies due to the induced charge imbalance and lattice distortion within the CeO2 lattice. As a result, it can be inferred that the incorporation of Ni ions into the CeO2 structure resulted in inhibited growth of CeO2 crystals due to the creation of a NixCe1-xO2-α solid solution and the production of oxygen vacancies.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Mesoporous Hollow Manganese Doped Ceria Nanoparticle for Effectively Prevention of Hepatic Ischemia Reperfusion Injury

Introduction

Hepatic ischemia-reperfusion injury (HIRI) is the main reason for liver dysfunction or failure after liver resection and liver transplantation. As excess accumulation of reactive oxygen species (ROS) is the leading factor, ceria nanoparticle, a cyclic reversible antioxidant, is an excellent candidate for HIRI.

Methods

Manganese doped mesoporous hollow ceria nanoparticles (MnO_x-CeO₂ NPs) were prepared, and the physicochemical characteristics, such as particle size, morphology, microstructure, etc. were elucidated. The in vivo safety and liver targeting effect were examined after i.v. injection. The anti-HIRI was determined by a mouse HIRI model.

Results

MnO_x-CeO₂ NPs with 0.40% Mn doped exhibited the strongest ROS-scavenging capability, which may due to the increased specific surface area and surface oxygen concentration. The nanoparticles accumulated in the liver after i.v. injection and exhibited good biocompatibility. In the HIRI mice model, MnO_x-CeO₂ NPs significantly reduced the serum ALT and AST level, decreased the MDA level and increased the SOD level in the liver, prevent pathological damages in the liver.

Conclusion

MnO_x-CeO₂ NPs were successfully prepared and it could significantly inhibit the HIRI after i.v. injection.

The facet effect of ceria nanoparticles on platinum dispersion and catalytic activity of methanol partial oxidation

The effect of platinum-supported nano-shaped ceria catalysts on methanol partial oxidation and methyl formate product selectivity has been investigated. A Pt-supported CeO2 nanocube catalyst had a higher turnover frequency than nanosphere catalysts; however, nanosphere catalysts showed higher selectivity towards methyl formate. The observed ceria shape effect in catalysis was associated with the shape-dependent Pt dispersion and its oxidation states. Furthermore, in situ studies revealed that the reduced platinum and mono-dentate methoxy group were responsible for the higher turnover frequency.

How the Morphology of NiOx-Decorated CeO2 Nanostructures Affects Catalytic Properties in CO2 Methanation

Effects of morphology and exposed crystal planes of NiO_x-decorated CeO₂ (NiCeO₂) nanostructured catalysts on activity during CO₂ methanation were examined, using nanorod (NR), nanocube (NC), and nanooctahedron (NO) structures. The NiCeO₂ nanorods (NiCeO₂-NR) showed superior activity to NiCeO₂-NC and NiCeO₂-NO along with excellent selectivity for CH₄. This material also demonstrated exceptional durability, with no significant loss of catalytic activity or structural change after use. Comprehensive physicochemical characterization as well as density functional theory calculations determined that the high performance of the NiCeO₂-NR was closely related to the large quantity of surface oxygen vacancies and the high degree of reversibility associated with the Ce⁴⁺ ↔ Ce³⁺ redox cycle of the support. These effects originate from the enhanced reactivity of oxygen atoms on the (110) surfaces of the oxide compared with the (100) and (111) surfaces. This information is expected to assist in the rational design of practical catalysts for the activation of CO₂ molecules and other important transformations.

Multifunctional Nafion/CeO2 Dendritic Structures for Enhanced Durability and Performance of Polymer Electrolyte Membrane Fuel Cells

The development of a novel approach to achieve high-performance and durable fuel cells is imperative for the further commercialization of proton-exchange (or polymer electrolyte) membrane fuel cells (PEMFCs). In this work, multifunctional dendritic Nafion/CeO₂ structures were introduced onto the cathode side of the interface between a membrane and a catalyst layer through electrospray deposition. The dendritic structures enlarged the interfacial contact area between the membrane and the catalyst layer and formed microscale voids between the catalyst layer and gas diffusion medium. This improved the PEMFC performance through the effective utilization of the catalyst and enhanced mass transport of the reactant. Especially, under low-humidity conditions, the hygroscopic effect of CeO₂ nanoparticles also boosted the power density of PEMFCs. In addition to the beneficial effects on the efficiency of the PEMFC, the incorporation of CeO₂, widely known as a radical scavenger, effectively mitigated the free-radical attack on the outer surface of the membrane, where chemical degradation is initiated by radicals formed during PEMFC operation. These multifunctional effects of the dendritic Nafion/CeO₂ structures on PEMFC performance and durability were investigated using various in situ and ex situ measurement techniques.

Cu oxide deposited on shape-controlled ceria nanocrystals for CO oxidation: influence of interface-driven oxidation states on catalytic activity

The polar CeO2 (100) surface facets contribute considerably to the formation of surface hydroxyl groups, which are necessary for selective, stable Cu1+ state loading and enhancement of CO oxidation activity.

Crystal facet engineering induced robust and sinter-resistant Au/α-MnO2 catalyst for efficient oxidation of propane: indispensable role of oxygen vacancies and Auδ+ species

Optimizing the interaction between metal active centers and supports by tuning crystal facets is an effective strategy to improve the activity and stability of catalysts.

Nickel and cobalt transfigured natural clay: a green catalyst for low-temperature catalytic soot oxidation

Modified 'natural clay' with Ni and Co nanoparticles explored as efficient catalyst for low-temperature soot oxidation activity studies.

Mesoporous Ce–Zr mixed oxides for selective oxidation of styrene in liquid phase

This work reports the synthesis of mesoporous Ce1-x-ZrxO2-δ (x = 0.5 and 0.8) mixed oxides with distinct Ce/Zr mole ratio by inverse micelle template method and their catalytic exploration for epoxidation of styrene in isopropanol solvent using TBHP as the oxidant. Among various catalysts investigated, the Ce0.8Zr0.2O2 combination catalyst exhibited best catalytic activity with ~ 98% conversion and ~ 90% selectivity to styrene epoxide. The synthesized Ce–Zr mixed oxide catalysts were characterized by various state-of-the-art techniques. Characterization studies revealed that Ce/Zr mole ratio has an imperative influence on the physicochemical properties such as surface area, oxygen vacancy concentration, and redox nature. Interestingly, catalytic efficiency was significantly improved with the increase of Ce and decrease of Zr content in the Ce–Zr mixed oxides. Catalytic efficiency and distribution of the products for styrene oxidation under various conditions such as reaction time, solvent, temperature, and styrene to TBHP mole ratio were also evaluated. Reusability of the highly active Ce0.8Zr0.2O2 mixed oxide catalyst was also demonstrated.

Engineered defects in cerium oxides: tuning chemical reactivity for biomedical, environmental, & energy applications

Nanocrystalline cerium oxide (nanoceria) is a rare earth oxide with a complex surface chemistry. This material has seen substantial investigation in recent years in both fundamental and applied studies due largely to more precise characterization of the unique surface structures, which mediate its pronounced redox activity. In particular, oxygen storage/buffering capacities have been thoroughly correlated with synthesis and processing condition effects on other material features such as surface (micro-) faceting, reconstruction, and (extent of) hydration. Key material features such as these modulate nanoceria redox performance by changing the crystal microenvironment. In this review, we present nanoengineering methods, which have produced increased nanoceria performance in biomedical, energy, and catalysis applications. The impact of combined/cooperative theoretical and experimental studies are highlighted throughout.

Transforming lanthanide and actinide chemistry with nanoparticles

Lanthanides and actinides are used in a wide variety of applications, from energy production to life sciences. To address toxicity issues due to the chemical, and often radiological, properties of these elements, methods to quantify and recover them from industrial waste are necessary. When used in biomedicine, lanthanides and actinides are incorporated in compounds that show promising therapeutic and/or bioimaging properties, but lack robust strategies to target cancer and other pathologies. Furthermore, current decorporation protocols to respond to accidental actinide exposure rely on intravenous injections of soluble chelating agents, which are inefficient for treatment of inhaled radionuclides trapped in lungs. In recent years, nanoparticles have emerged as powerful tools in both industry and clinical settings. Because some inorganic nanoparticles are sensitive to external stimuli, such as light and magnetic fields, they can be used as building blocks for sensitive bioassays and separation techniques. In addition, nanoparticles can be functionalized with multiple ligands and act as carriers for selective delivery of therapeutic and contrast agents. This review summarizes and discusses recent progress on the use of nanoparticles in lanthanide and actinide chemistry. We examine different types of nanoparticles based on composition, functionalization, and properties, and we critically analyze their performance in a comparative mode. Our focus is two-pronged, including the nanoparticles free of lanthanides and actinides that are used for the detection, separation, or decorporation of f-block elements, as well as the nanoparticles that enhance the inherent properties of lanthanides and actinides for therapeutics, imaging and catalysis.

CoOx-decorated CeO2 heterostructures: effects of morphology on their catalytic properties in diesel soot combustion

The effect of the morphology, which exposes different crystal planes, on the physicochemical properties and catalytic activity in diesel carbon soot oxidation was studied using CoOx-decorated CeO2 (CoCeO2) heterostructured catalysts, such as nanorods (NRs), nanocubes (NCs), and nanoparticles (NPs). The CoOx/CeO2 nanorods (CoCeO2-NR) showed superior carbon soot combustion activity at lower temperatures to CoCeO2-NCs and CoCeO2-NPs under both tight and loose contact modes with soot combustion temperatures (T50) of 321 and 494 °C, respectively. A comprehensive analysis by means of X-ray diffraction, Raman spectroscopy, high-angle annular dark-field scanning transmission electron microscopy, in situ X-ray absorption fine structure, temperature-programmed reduction, oxygen storage/release measurements, and density functional theory calculations revealed that the improved activity of CoCeO2-NRs is mainly ascribed to the high oxygen release rate and strong redox capability of the supported Co species, with complete reversibility. This originates from the high reactivity of oxygen atoms on (110) surfaces, compared to (100) and (111) surfaces over CeO2. Additionally, CoCeO2-NRs displayed durability and recyclability without any significant loss of catalytic activity or structural change. These insights will aid in the rational design of practical catalysts for the purification of diesel exhaust and other important transformations.

Tuning the oxygen release properties of CeO2-based catalysts by metal–support interactions for improved gasoline soot combustion

CeO₂-supported Cu and Rh catalysts showed high soot combustion activities by their high oxygen release properties depending on moderate metal–oxygen bond energy.

CeO2@SiO2 Core-Shell Nanostructure-Supported CuO as High-Temperature-Tolerant Catalysts for CO Oxidation

Supported CuO-CeO₂ catalysts have been extensively studied for their outstanding catalytic activity in CO oxidation. Unfortunately, they are prone to sintering and deactivation when exposed to high-temperature automotive exhausts. Herein, taking advantage of the heat-resistant SiO₂ microspheres, we fabricated a series of core-shell-structured yCuO- xCeO₂@SiO₂ ( x is the weight ratio of CeO₂-SiO₂ and y is the weight ratio of Cu-(CeO₂@SiO₂)) composite catalysts. All the small CeO₂ particles were bound to the SiO₂ spheres, forming an xCeO₂@SiO₂ structure, on the surface of which a certain amount of CuO was well-dispersed. The 5CuO-50CeO₂@SiO₂ catalyst exhibited good activity, with the full conversion of CO achieved at around 130 °C, and no obvious deactivation was observed in the stability test. Importantly, the interaction between CuO and CeO₂@SiO₂ enhanced its durability at high temperatures. Even at 800 °C and with a space velocity of 800 000 mL·g_cat^-1·h^-1, CO conversion could be maintained at 90%, which is prospectively applied in a real CO elimination system. The result of the temperature-programmed reduction in hydrogen demonstrated that this special core-shell-structured 5CuO-50CeO₂@SiO₂ catalyst improved the reduction ability of the CuO species. In situ diffuse reflectance infrared Fourier transform spectroscopy measurements further confirmed that CO molecules preferred to be adsorbed on Cu(I) species to form reactive CO-Cu(I) that enhanced the reactivity of the 5CuO-50CeO₂@SiO₂ catalyst.

Synthesis of Fuel Grade Molecules from Hydroprocessing of Biomass-Derived Compounds Catalyzed by Magnetic Fe(NiFe)O4-SiO2 Nanoparticles

The development of promising magnetic nanocatalysts is one of the key research topics in the field of catalysis. This is because of their versatile surface physicochemical, magnetic, and size-dependent catalytic properties. Herein, an optimization strategy for the synthesis of high-value fuel grade chemicals from hydro-deoxygenation of biomass-derived furfural and vanillin using a nanostructured magnetic Fe(NiFe)O4-SiO2 catalyst, synthesized by a facile one-pot procedure, was presented. Accordingly, effects of calcination temperature from 400, 500, 600 to 700 °C on the structure-activity properties of the magnetic Fe(NiFe)O4-SiO2 catalyst was systematically studied. The magnetic Fe(NiFe)O4-SiO2 catalyst calcined at 500 °C exhibited the best catalytic performance, giving full conversions of vanillin and furfural, with good selectivity of 63 and 59% to cyclohexane and n-pentane (fuel grade chemicals), respectively. The prowess of this catalyst was attributed to its abundant acid properties in addendum to high BET surface area.

Catalytic Behaviour of Flame-Made CuO-CeO2 Nanocatalysts in Efficient CO Oxidation

CuO-CeO2 nanocatalysts with varying CuO contents (1, 5, 9, 14 and 17 wt %) were prepared by one-step flame spray pyrolysis (FSP) and applied to CO oxidation. The influences of CuO content on the as-prepared catalysts were systematically characterized by X-ray diffraction (XRD), N2 adsorption-desorption at −196 °C, field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and hydrogen-temperature programmed reduction (H2-TPR). A superior CO oxidation activity was observed for the 14 wt % CuO-CeO2 catalyst, with 90% CO conversion at 98 °C at space velocity (60,000 mL × g−1 × h−1), which was attributed to abundant surface defects (lattice distortion, Ce3+, and oxygen vacancies) and high reducibility supported by strong synergistic interaction. In addition, the catalyst also displayed excellent stability and resistance to water vapor. Significantly, in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) showed that in the CO catalytic oxidation process, the strong synergistic interaction led readily to dehydroxylation and CO adsorption on Cu+ at low temperature. Furthermore, in the feed of water vapor, although there was an adverse effect on the access of CO adsorption, there was also a positive effect on the formation of fewer carbon intermediates. All these results showed the potential of highly active and water vapor-resistive CuO-CeO2 catalysts prepared by FSP.

Synergetic effect over flame-made manganese doped CuO-CeO2 nanocatalyst for enhanced CO oxidation performance

CuO-CeO2 nanocatalysts with different amounts of Mn dopping (Mn/Cu molar ratios of 0.5 : 5, 1 : 5 and 1.5 : 5) were synthesized by flame spray pyrolysis (FSP) method and tested in the catalytic oxidation of CO. The physicochemical properties of the synthesised samples were characterized systematically, including using X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), oxygen-temperature programmed desorption (O2-TPD), hydrogen-temperature programmed reduction (H2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). The results showed that the 1Mn-Cu-Ce sample (Mn/Cu molar ratio of 1 : 5) exhibited superior catalytic activity for CO oxidation, with the temperature of 90% CO oxidation at 131 °C at a high space velocity (SV = 60 000 mL g-1 h-1), which was 56 °C lower than that of the Cu-Ce sample. In addition, the 1Mn-Cu-Ce sample displays excellent stability with prolonged time on CO stream and the resistance to water vapor. The significantly enhanced activity was correlated with strong synergetic effect, leading to fine textual properties, abundant chemically adsorbed oxygen and high lattice oxygen mobility, which further induced more Cu+ species and less formation of carbon intermediates during the CO oxidation process detected by in situ DRIFTS analysis. This work will provide in-depth understanding of the synergetic effect on CO oxidation performances over Mn doped CuO-CeO2 composite catalysts through FSP method.

Advances in porous and nanoscale catalysts for viable biomass conversion

Solid catalysts with unique porosity and nanoscale properties play a promising role for efficient valorization of biomass into sustainable advanced fuels and chemicals.

Enhanced soot oxidation activity over CuO/CeO2 mesoporous nanosheets

CuO/CeO₂ mesoporous nanosheets exhibited superior soot oxidation activity owing to the synergistic effects.

Heterostructured Copper-Ceria and Iron-Ceria Nanorods: Role of Morphology, Redox, and Acid Properties in Catalytic Diesel Soot Combustion

This work reports the synthesis of heterostructured copper-ceria and iron-ceria nanorods and the role of their morphology, redox, and acid properties in catalytic diesel soot combustion. Microscopy images show the presence of nanocrystalline CuO (9.5 ± 0.5 nm) and Fe₂O₃ (7.3 ± 0.5 nm) particles on the surface of CeO₂ nanorods (diameter is 8.5 ± 2 nm and length within 16-89 nm). In addition to diffraction peaks of CuO and Fe₂O₃ nanocrystallites, X-ray diffraction (XRD) studies reveal doping of Cu²⁺ and Fe³⁺ ions into the fluorite lattice of CeO₂, hence abundant oxygen vacancies in the Cu/CeO₂ and Fe/CeO₂ nanorods, as evidenced by Raman spectroscopy studies. XRD and Raman spectroscopy studies further show substantial perturbations in Cu/CeO₂ rods, resulting in an improved reducibility of bulk cerium oxide and formation of abundant Lewis acid sites, as investigated by H₂-temperature-programmed reduction and pyridine-adsorbed Fourier transform infrared studies, respectively. The Cu/CeO₂ rods catalyze the soot oxidation reaction at the lowest temperatures under both tight contact (Cu/CeO₂; T50 = 358 °C, temperature at which 50% soot conversion is achieved, followed by Fe/CeO₂; T50 = 368 °C and CeO₂; T50 = 433 °C) and loose contact conditions (Cu/CeO₂; T50 = 419 °C and Fe/CeO₂; T50 = 435 °C). A possible mechanism based on the synergetic effect of redox and acid properties of Cu/CeO₂ nanorods was proposed: acid sites can activate soot particles to form reactive carbon species, which are oxidized by gaseous oxygen/lattice oxygen activated in the oxygen vacancies (redox sites) of ceria rods.

Morphology-dependent oxygen vacancies and synergistic effects of Ni/CeO2 catalysts for N2O decomposition

Strong morphology-dependent oxygen vacancies and synergistic effects of Ni/CeO₂ catalysts and their vital effects on N₂O decomposition.

Functionalised heterogeneous catalysts for sustainable biomass valorisation

Functionalised heterogeneous catalysts show great potentials for efficient valorisation of renewable biomass to value-added chemicals and high-energy density fuels.