Semifluorinated Alkanes at the Air-Water Interface: Tailoring Structure and Rheology at the Molecular Scale

Influence of Semifluorinated Alkane Surface Domains on Phase Behavior and Linear and Nonlinear Viscoelasticity of Phospholipid Monolayers

Semifluorinated alkanes self-assemble into 30-40 nm-large surface domains (hemimicelles) at the air/water interface. They have been drawing increasing attention to stabilize microbubbles coated with lipids, which are used for enhancing the contrast in sonographic imaging. Although previous studies suggested that semifluorinated alkanes increase the stability of phospholipid membranes, little is known about how semifluorinated alkanes influence phase behaviors and mechanical properties of lipid-coated microbubbles. As a well-defined model of microbubble surfaces, we prepared monolayers consisting of a mixture of phospholipids and semifluorinated alkanes at the air/water interface and investigated the influence of hemimicelles of semifluorinated alkanes on the phase behavior and interfacial viscoelastic properties of phospholipid monolayers. Hemimicelles are phase-separated from phospholipids and accumulate at the phase boundary, which strongly modulates the correlation between solid phospholipid domains. Intringuingly, we found that the mixed monolayer of semifluorinated alkanes and phospholipids possesses linear and nonlinear viscoelastic properties comparable to those of phospholipid monolayers. Since the mixing of semifluorinated alkanes and phospholipids enables one to overcome the intrinsically low stability of pure semifluorinated alkanes against the change in the surface area of microbubbles through the partial dissolution of gas into the aqueous phase, this is a promising strategy for the stable coating of microbubbles in ultrasound diagnosis.

Interfacial Rheology of Gallium-Based Liquid Metals

Gallium and its alloys react with oxygen to form a native oxide that encapsulates the liquid metal with a solid "skin". The viscoelasticity of this skin is leveraged in applications such as soft electronics, 3D printing, and components for microfluidic devices. In these applications, rheological characterization of the oxide skin is paramount for understanding and controlling liquid metals. Here, we provide a direct comparison of the viscoelastic properties for gallium-based liquid metals and illustrate the effect of different subphases and addition of a dopant on the elastic nature of the oxide skin. The du Noüy ring method is used to investigate the interfacial rheology of oxide skins formed by gallium-based liquid metal alloys. The results show that the oxide layer on gallium, eutectic gallium-indium, and Galinstan are viscoelastic with a yield stress. Furthermore, the storage modulus of the oxide layer is affected by exposure to water or when small amounts of aluminum dopant are added to the liquid metals. The former scenario decreases the interfacial storage modulus of the gallium by 35-85% while the latter increases the interfacial storage modulus by 25-45%. The presence of water also changes the chemical composition of the oxide skin. Scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy suggest that a microstructural evolution of the interface occurs when aluminum preferentially migrates from the bulk to the surface. These studies provide guidance on selecting liquid metals as well as simple methods to optimize their rheological behavior for future applications.

Advances in the treatment of rhegmatogenous retinal detachment

The pathogenesis of rhegmatogenous retinal detachment depends on three factors, namely, retinal rupture, vitreous liquefaction and traction causing the retina to separate from the pigment epithelium, among which retinal rupture is the most important. Retinopathy is caused by a gap between the neurosensory retina and the retinal pigment epithelium, which severely damages the visual function of the patient. Therefore, early clinical discovery, prevention and selection of an appropriate treatment are important. This article reviews progress in the treatment of retinal detachment.

Two-Dimensional Radial or Ring-Banded Nonbirefringent Spherulites of Semifluorinated Alkanes Coexistent with Close-Packed Self-Assembled Surface Nanodomains

A series of semifluorinated alkanes (C _nF_{2 n+1}C _mH_{2 m+1} diblocks, F n H m, n = 6, 8, 10; m = 16, 18, 20), when cast as films onto solid substrates, were found to form ring-banded or radial spherulites when heated above their isotropic temperature and subsequently cooled down to room temperature, demonstrating that the formation of two-dimensional (2D) spherulites is a general feature of molecular fluorocarbon-hydrocarbon diblocks. These spherulites are not birefringent, a seldom encountered feature for such structures (never, so far, for spherulites made of small molecules). They also provide examples of fluorinated 2D spherulites. Film morphology was analyzed by optical microscopy, interferometric profilometry, atomic force microscopy (AFM), and scanning electron microscopy. Increasing the length of the Fn segment favors the formation of ring-banded spherulites, whereas short Fn segments tend to favor extended radial stripes. Variation of the cooling rate provides control over the size and morphology of the spherulites: slow cooling promotes fibers and radial spherulites, whereas fast cooling fosters ring-banded spherulites. The AFM studies of F10 H16 films revealed that the latter consist of stacks of regularly spaced lamellae. We also observed that, remarkably, stacked lamellae (repeating distance ∼6 nm) can coexist with a layer of close-packed monodisperse circular self-assembled surface nanodomains of Fn Hm diblocks (∼30 nm in diameter); the latter are known to form from such diblocks at interfaces at room temperature. Substrates partially covered with F10 H16 contain incomplete ring-banded spherulites and smaller objects in which the lamellae and circular nanodomains coexist.

Emergence of Strong Nonlinear Viscoelastic Response of Semifluorinated Alkane Monolayers

Viscoelasticity of monolayers of fluorocarbon/hydrocarbon tetrablock amphiphiles di(FnHm) ((C_nF_2n+1CH₂)(C_m-2H_2m-3)CH-CH(C_nF_2n+1CH₂)(C_m-2H_2m-3)) was characterized by interfacial dilational rheology under periodic oscillation of the moving barriers at the air/water interface. Because the frequency dispersion of the response function indicated that di(FnHm) form two-dimensional gels at the interface, the viscosity and elasticity of di(FnHm) were first analyzed with the classical Kelvin-Voigt model. However, the global shape of stress response functions clearly indicated the emergence of a nonlinearity even at very low surface pressures (π ≈ 5 mN/m) and small strain amplitudes (u₀ = 1%). The Fourier-transformed response function of higher harmonics exhibited a clear increase in the intensity only from odd modes, corresponding to the nonlinear elastic component under reflection because of mirror symmetry. The emergence of strong nonlinear viscoelasticity of di(FnHm) at low surface pressures and strain amplitudes is highly unique compared to the nonlinear viscoelasticity of other surfactant systems reported previously, suggesting a large potential of such fluorocarbon/hydrocarbon molecules to modulate the mechanics of interfaces using the self-assembled domains of small molecules.

Phase-separated surfactant monolayers: Exploiting immiscibility of fluorocarbons and hydrocarbons to pattern interfaces

The mutual immiscibility of hydrogenated and fluorinated surfactants at interfaces frequently leads to phase-separation, which provides a useful and flexible method for patterning air-water and solid-air interfaces. In this article, we review recent advances in the use of hydrogenated-fluorinated surfactant mixtures to achieve interfacial patterning. For even relatively simple systems comprised of binary mixed monolayers of hydrogenated and perfluorinated fatty acids, a diverse range of film morphologies can be generated at the air-water interface and successfully transferred onto solid substrates. Systematic investigations reported over the past several years have allowed for correlation between the chemical structure of the film constituents with the gross film morphology and underlying crystalline structure of the films. Early thermodynamic models based on the interplay between dipole-dipole repulsion forces between charged headgroups balanced by line tension between phases that were formulated to describe phase-behavior in simple phospholipid monolayer systems have proven highly useful to describe morphologies for the immiscible surfactant blends. Beyond simple binary fatty acid mixtures, highly-structured films have also been reported in mixed phospholipid systems, which have found important application in controlling the physical, compositional and performance properties of lung surfactant mixtures, as well as in semifluorinated alkane monolayers which form unique, hemimicellar structures at both liquid and solid interfaces. We also describe advances in using these approaches to pattern photopolymerizable, luminescent surfactants, which have found extensive use in colorimetric and fluorometric sensing devices. The long-term outlook for this field, with an emphasis on potential applications and future research directions are discussed.

Evaluating polymeric biomaterial-environment interfaces by Langmuir monolayer techniques

Polymeric biomaterials are of specific relevance in medical and pharmaceutical applications due to their wide range of tailorable properties and functionalities. The knowledge about interactions of biomaterials with their biological environment is of crucial importance for developing highly sophisticated medical devices. To achieve optimal in vivo performance, a description at the molecular level is required to gain better understanding about the surface of synthetic materials for tailoring their properties. This is still challenging and requires the comprehensive characterization of morphological structures, polymer chain arrangements and degradation behaviour. The review discusses selected aspects for evaluating polymeric biomaterial-environment interfaces by Langmuir monolayer methods as powerful techniques for studying interfacial properties, such as morphological and degradation processes. The combination of spectroscopic, microscopic and scattering methods with the Langmuir techniques adapted to polymers can substantially improve the understanding of their in vivo behaviour.

Tuning the Structure and Rheology of Polystyrene Particles at the Air-Water Interface by Varying the pH

We form films of carboxylated polystyrene particles (C-PS) at the air-water interface and investigate the effect of subphase pH on their structure and rheology by using a suite of complementary experimental techniques. Our results suggest that electrostatic interactions drive the stability and the structural order of the films. In particular, we show that by increasing the pH of the subphase from 9 up to 13, the films exhibit a gradual transition from solid to liquidlike, which is accompanied by a loss of the long-range order (that characterizes them at lower values of pH). Direct optical visualization of the layers, scanning electron microscopy, and surface pressure isotherms indicate that the particles deposited at the interface form three-dimensional structures involving clusters, with the latter being suppressed and a quasi-2D particle configuration eventually reached at the highest pH values. Evidently, the properties of colloidal films can be tailored significantly by altering the pH of the subphase.