Evaporation-Driven Deposition of WO₃ Thin Films from Organic-Additive-Free Aqueous Solutions by Low-Speed Dip Coating and Their Photoelectrochemical Properties

Recent Developments in Nickel-Based Layered Double Hydroxides for Photo(-/)electrocatalytic Water Oxidation

Layered double hydroxides (LDHs), especially those containing nickel (Ni), are increasingly recognized for their potential in photo(-/)electrocatalytic water oxidation due to the abundant availability of Ni, their corrosion resistance, and their minimal toxicity. This review provides a comprehensive examination of Ni-based LDHs in electrocatalytic (EC), photocatalytic (PC), and photoelectrocatalytic (PEC) water oxidation processes. The review delves into the operational principles, highlighting similarities and distinctions as well as the benefits and limitations associated with each method of water oxidation. It includes a detailed discussion on the synthesis of monolayer, ultrathin, and bulk Ni-based LDHs, focusing on the merits and drawbacks inherent to each synthesis approach. Regarding the EC oxygen evolution reaction (OER), strategies to improve catalytic performance and insights into the structural evolution of Ni-based LDHs during the electrocatalytic process are summarized. Furthermore, the review extensively covers the advancements in Ni-based LDHs for PEC OER, including an analysis of semiconductors paired with Ni-based LDHs to form photoanodes, with a focus on their enhanced activity, stability, and underlying mechanisms facilitated by LDHs. The review concludes by addressing the challenges and prospects in the development of innovative Ni-based LDH catalysts for practical applications. The comprehensive insights provided in this paper will not only stimulate further research but also engage the scientific community, thus driving the field of photo(-/)electrocatalytic water oxidation forward.

Oxygen Vacancy-Enhanced Photoelectrochemical Water Splitting of WO3/NiFe-Layered Double Hydroxide Photoanodes

Photoelectrochemical (PEC) water splitting serves as one of the promising approaches for producing clean and renewable energy, and their solar-hydrogen energy conversion efficiency depends on the interfacial charge separation and carrier mobility. Herein, we report an effective strategy to promote the PEC performance by fabricating a WO₃ photoanode rich in oxygen vacancies (Ov) modified by NiFe-based layered double hydroxide (LDH). When WO₃-Ov/NiFe-LDH is used as a photoanode, the maximum photocurrent density at 1.8 V versus RHE has been significantly enhanced to 2.58 mA·cm^-2, which is 4.3 times higher than that of WO₃. In addition, analogues were studied in controlled experiments without Ov, which further demonstrated that the synergistic effect of NiFe-LDH and Ov resulted in increased carrier concentration and driving force. According to electrical impedance spectroscopy, X-ray photoelectron spectroscopy, and Mott-Schottky analysis, the built-in electronic field in WO₃ homojunction, along with the accelerated hole capture by the NiFe-LDH cocatalyst contributes to the improved charge separation and transport in the WO₃-Ov/NiFe-LDH electrode. This work proposes an efficient and valuable strategy for designing the structure of WO₃-based photoelectrodes.

Aqueous synthesis of tin- and indium-doped WO3 films via evaporation-driven deposition and their electrochromic properties

M-doped WO3 (M = Sn or In) films were prepared from aqueous coating solutions via evaporation-driven deposition during low-speed dip coating. Sn- and In-doping were easily achieved by controlling the chemical composition of simple coating solutions containing only metal salts and water. The crystallinity of the WO3, Sn-doped WO3, and In-doped WO3 films varied with heating temperature, where amorphous and crystalline films were obtained by heating at 200 and 500 °C, respectively. All the amorphous and crystalline films showed an electrochromic response, but good photoelectrochemical stability was observed only for the crystalline samples heated at 500 °C. The crystalline In-WO3 films exhibited a faster electrochromic color change than the WO3 or Sn-WO3 films, and good cycle stability for the electrochromic response in the visible wavelength region.

Evaporation-Driven Deposition of ITO Thin Films from Aqueous Solutions with Low-Speed Dip-Coating Technique

We suggest a novel wet coating process for preparing indium tin oxide (ITO) films from simple solutions containing only metal salts and water via evaporation-driven film deposition during low-speed dip coating. Homogeneous ITO precursor films were deposited on silica glass substrates from the aqueous solutions containing In(NO₃)₃·3H₂O and SnCl₄·5H₂O by dip coating at substrate withdrawal speeds of 0.20-0.50 cm min^-1 and then crystallized by the heat treatment at 500-800 °C for 10-60 min under N₂ gas flow of 0.5 L min^-1. The ITO films heated at 600 °C for 30 min had a high optical transparency in the visible range and a good electrical conductivity. Multiple-coating ITO films obtained with five-times dip coating exhibited the lowest sheet (ρ_S) and volume (ρ_V) resistivities of 188 Ω sq^-1 and 4.23 × 10^-3 Ω cm, respectively.