CO2-Triggered Pickering Emulsion Based on Silica Nanoparticles and Tertiary Amine with Long Hydrophobic Tails

Switchable CO2-Responsive Janus Nanoparticle for Lipase Catalysis in Pickering Emulsion

The use of convertible immobilized enzyme carriers is crucial for biphasic catalytic reactions conducted in Pickering emulsions. However, the intense mechanical forces during the conversion process lead to enzyme leakage, affecting the stability of the immobilized enzymes. In this study, a CO2-responsive switchable Janus (CrSJ) nanoparticle (NP) was developed using silica NP, with one side featuring aldehyde groups and the other side adsorbing N,N-dimethyldodecylamine. A switchable Pickering emulsion catalytic system for biphasic interface reactions was prepared by covalently immobilizing lipase onto the CrSJ NPs. The CO2-responsive nature of the CrSJ NPs allowed for rapid conversion of the Pickering emulsion, and covalent immobilization substantially reduced lipase leakage while enhancing the stability of the immobilization during the conversion process. Impressively, after repeated transformations, the Pickering emulsion still maintains its original structure. Following 10 consecutive cycles of esterification and hydrolysis reactions, the immobilized enzyme's activity remains at 77.7 and 79.5% of its initial activity, respectively. The Km of the CrSJ catalytic system showed no significant change compared to the free enzyme, while its Vmax values were 1.2 and 1.6 times that of the free enzyme in esterification and hydrolysis reactions, respectively.

Computational Insights into a CO2-Responsive Emulsion Prepared Using the Superamphiphile Assembled by Electrostatic Interactions

The superamphiphiles exhibit broad prospects for fabricating stimuli-responsive emulsions. Because the superamphiphiles are assembled via noncovalent interactions, they have the advantage of fast response and high efficiency. Recently, a series of switchable emulsions using CO2-responsive superamphiphiles have been developed, which extends the applications of CO2-responsive materials in widespread field. However, there is still a lack of fundamental understanding on the switching mechanism related to the assembled structure of superamphiphiles at the oil-water interface. We employed molecular dynamics (MD) simulations to investigate the reversible emulsification/demulsification process of a responsive emulsion system stabilized by a recently developed responsive superamphiphile (BTOA), which consists of oleic acid (OA) and cationic amine (named 1,3-bis(aminopropyl)tetramethyldisiloxane, BT). The simulation results present the morphologies in both the emulsion and demulsification states. It is found that the ionized OA- and the protonated BT+ together form an adsorption layer at the oil-water interface. The hydrophobic parts of BT+ are inserted into the adsorption layer, and the two amine groups contact the water phase. This adsorption layer reduces the interfacial tension and stabilizes the emulsion. After the bubbling of CO2, the surfactants were fully protonated to OA and BT2+. Because of the changes in the molecular polarity, OA and BT2+ entered the oil and water phases, respectively, resulting in demulsification. The structural and dynamical properties were analyzed to reveal the different intermolecular interactions that were responsible for the reversible reversibility of the emulsion. The observations are considered to be complementary to experimental studies and are expected to provide deeper insights into studies on developing responsive materials via supramolecular assemblies.

CO2-Switchable colloids

The development and design of CO2-switchable colloidal particles is described. A presentation of the principles of CO2 switching, especially as they apply to colloids, is followed by recent progress in the preparation of several types of colloidal particles (polymer nanoparticles, metal-organic frameworks (MOFs), quantum dots, graphene, cellulose nanocrystals, carbon nanotubes) for various applications (Pickering stabilizers, catalysts, latexes), and our perspective on future opportunities.

Molecular Dynamics Study of Silica Nanoparticles and CO2-Switchable Surfactants at an Oil-Water Interface

Adsorbing CO2-sensitive surfactants on the surface of nanoparticles is an important strategy for preparing stimuli-responsive Pickering emulsions. However, the microscopic mechanisms are still limited, owing to a lack of intuitive understanding at the molecular level on the interactions between nanoparticle and switchable surfactants at the oil-water interface. We employed the molecular dynamics (MD) simulations to explore the mechanism behind the reversible emulsification/demulsification of a Pickering emulsion stabilized by silica nanoparticles (NPs) and CO2-switchable surfactants, named N-(3-(dimethylamino)propyl)alkyl amide (CPMA). MD results show that the protonated surfactant CPMAH+ has strong hydrophilicity, forming an adsorption layer at the oil-water interface. The ionic surfactants can be tightly adsorbed on NP surface through electrostatic interactions. Thus, the formed colloid particle has both hydrophobic and hydrophilic properties, which is a key factor in stabilizing emulsion. When CPMAH+ molecules were deprotonated to CPMA, the hydration activity of the headgroups reduced greatly, inducing a mixture with oil molecules. There are still a certain number of CPMA molecules residing at the oil-water interface due to the hydrophilic amine groups. The results from repeated simulations show that NP can either stay in the water phase or locate at the interface. Even NP was finally adsorbed on the interface and combined with CPMA or oil molecules, the adsorption configuration of CPMA on the NP surface was essentially different from that of CPMAH+. The potential of mean force confirmed that the combination between NP and CPMA is quite unstable due to the disappearance of electrostatic attraction. Different binding configurations and stability between NP and CPMA or CPMAH+ were the fundamental reason for the reversible emulsification/demulsification of Pickering emulsion.

Design of Proanthocyanidins and TiO2 Nanoparticles-Based Novel Emulsions as a Platform for UV Protection

A white oil-in-water novel emulsion stabilized by TiO2 nanoparticles with UVB shielding properties and proanthocyanidins with antioxidant activity was prepared, where the proanthocyanidins aggregated at the oil-water interface to reduce interfacial tension while TiO2 nanoparticles were dispersed in the continuous water phase to hinder droplet coalescence. It was found that the average oil droplet size was less than 10 μm and decreased with the increase of proanthocyanidins concentration, but the increase of the content of TiO2 nanoparticles had little effect on it. The combination of TiO2 nanoparticles and proanthocyanidins was versatile for oil phases with different polarities, and the resulting emulsion exhibited high stability in the face of centrifugation, heating and prolonging storage time. After encapsulating the UVA filter avobenzone in white oil, the emulsion was endowed with the ability to resist UVB and UVA. Further, the emulsion showed great free radical scavenging ability for superoxide anion radical (⋅O2 - ), hydroxyl radical (⋅OH) with the clearance rate of over 70 %, indicating the good antioxidant activity. The ingenious combination of UVB, UVA filter and antioxidant with emulsion as carrier provides a new idea for the preparation of full-band sunscreen emulsion.

Pickering Emulsions Synergistically Stabilized by Aliphatic Primary Amines and Silica Nanoparticles

Innovation in emulsion compositions is necessary to enrich emulsion formulations and applications. Herein, Pickering emulsions were prepared using silica nanoparticles and aliphatic primary amines with an oil-water ratio of 1:1 (v/v). Contact angle experiments revealed that the in situ hydrophobization of nanoparticles was caused by the surface adsorption of amine molecules. Notably, the interactions between amine compounds and the surface of silica nanoparticles were electrostatic attractions and mutual hydrogen bonding. The existence of hydrogen bonds was further confirmed by demulsification experiments using a chaotropic agent DMF and increasing temperatures. The hydrophobicity of silica nanoparticles can be effectively improved using most commercially available aliphatic primary amines such as n-hexylamine, n-octylamine, n-decylamine, dodecylamine, and tetradecylamine. The minimum concentrations of the aforementioned amines necessary for stabilizing the emulsions with 0.3 wt % silica nanoparticles are 3, 0.6, 0.3, 0.06, and 0.03 mM, respectively, decreasing significantly with increasing alkyl chain length. With the increase of the amine concentrations, the hydrophobicity of silica particles monotonically increased and finally resulted in the inversion of emulsions. The amine concentrations for emulsion phase inversion were 150, 40, 30, 20, and 20 mM, respectively, in the presence of 0.3 wt % silica nanoparticles. In this work, silica nanoparticles were hydrophobized using aliphatic primary amines. The composite stabilizers developed are useful for developing novel stimuli-responsive Pickering emulsions, while the synergistic effects introduced herein are also helpful in expanding the hydrophobization methods available for nanoparticles.

Synthesis and stability of switchable CO2-responsive foaming coupled with nanoparticles

CO₂-responsive foaming has been drawing huge attention due to its unique switching characteristics in academic research and industrial practices, whereas its stability remains questionable for further applications. In this paper, a new CO₂-switchable foam was synthesized by adding the preferably selected hydrophilic nanoparticle N20 into the foaming agent C₁₂A, through a series of analytical experiments. Overall, the synergy between cationic surfactants and nanoparticles with a contact angle of 37.83° is the best. More specifically, after adding 1.5 wt% N20, the half-life of foam is 14 times longer than that of pure C₁₂A foam. What’s more, the C₁₂A-N20 solution is validated to own distinctive CO₂-N₂ switching features because very slight foaming degradations are observed in terms of the foaming volume and half-life time even after three cycles of CO₂-N₂ injections. This study is of paramount importance pertaining to future CO₂ foam research and applications in energy and environmental practices.

•

Cationic surfactants have the best synergy with NPs with a contact angle of 37.83°

•

The foam stability increased with the increase of NPs concentration

•

CO₂/N₂ can control the foaming properties of C₁₂A-N20 solution and are reversible

Redox and pH-responsive emulsions based on TiO2 nanoparticles and ferrocene derivates

We synthesized a novel surfactant ferrocene azine (FcA) and developed a redox and pH-responsive emulsion stabilized by TiO2 nanoparticles and oxidized ferrocene azine (Fc+A) with fluorescence through simple mixing instead...

Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Advanced switchable molecules and materials have shown great potential in numerous applications. These novel materials can express different states of physicochemical properties as controlled by a designated stimulus, such that the processing condition can always be maintained in an optimized manner for improved efficiency and sustainability throughout the whole process. Herein, the recent advances in switchable molecules/materials in oil recovery and oily waste cleanup are reviewed. Oil recovery and oily waste cleanup are of critical importance to the industry and environment. Switchable materials can be designed with various types of switchable properties, including i) switchable interfacial activity, ii) switchable viscosity, iii) switchable solvent, and iv) switchable wettability. The materials can then be deployed into the most suitable applications according to the process requirements. An in-depth discussion about the fundamental basis of the design considerations is provided for each type of switchable material, followed by details about their performances and challenges in the applications. Finally, an outlook for the development of next-generation switchable molecules/materials is discussed.

Molecular dynamics simulation of CO2-switchable surfactant regulated reversible emulsification/demulsification processes of a dodecane-saline system

CO2-Switchable surfactants are of great potential in a wide range of industrial applications related to their ability to stabilize and destabilize emulsions upon command. Molecular dynamics simulations have been performed to reveal the fundamental mechanism of the reversible emulsification/demulsification processes of a dodecane-saline system by a CO2-switchable surfactant that switches between active (i.e., N'-dodecyl-N,N-dimethylacetamidinium (DMAAH+)) and inactive (i.e., N'-dodecyl-N,N-dimethylacetamidine (DMAA)) forms. The density profiles indicate that DMAAH+ could increase the oil-water interfacial thickness to a greater extent compared to DMAA. DMAAH+ could sharply reduce the interfacial tension of the dodecane-saline system, while DMAA only exhibits a limited decrease, which is in accordance with the experimental observation that DMAAH+/DMAA can reversibly emulsify/demulsify alkane-water systems. Our simulations showed that both the number and lifetime of hydrogen bonds (HBs) between DMAA and water are almost equal to those between DMAAH+ and water. In DMAA, the N atom connecting with the alkyl tail acted as a HB acceptor, while the N atom attached by a proton in DMAAH+ acted as a HB donor. Furthermore, the HBs between DMAAH+ and HCO3- at the interfaces are relatively limited. Hence, it is deduced that the HBs are insufficient to achieve the CO2-switchability of DMAA/DMAAH+. The Lennard Jones and coulombic potentials between DMAA/DMAAH+ and other species show that the coulombic potentials between DMAAH+ and water or anions (i.e., Cl- and HCO3-) sharply decrease with the increase of DMAAH+ and are much lower than those in models with DMAA. The enhanced coulombic interactions between DMAAH+ and anions lead to a remarkable reduction in interfacial tension and the emulsification of the alkane-saline system. Therefore, coulombic interactions are of crucial importance to the reversible emulsification/demulsification processes regulated by CO2-switchable surfactants, namely DMAAH+/DMAA.

CO2/N2-Responsive Nanoparticles for Enhanced Oil Recovery During CO2 Flooding

During CO₂ flooding, serious gas channeling occurs in ultra-low permeability reservoirs due to the high mobility of CO₂. The chief end of this work was to research the application of responsive nanoparticles for mobility control to enhance oil recovery. Responsive nanoparticles were developed based on the modification of nano-silica (SiO₂) by 3-aminopropyltrimethoxysilane (KH540) via the Eschweiler-Clark reaction. The proof of concept for responsive nanoparticles was investigated by FT-IR, ¹H-NMR, TEM, DLS, CO₂/N₂ response, wettability, plugging performance, and core flooding experiments. The results indicated that responsive nanoparticles exhibited a good response to control nanoparticle dispersity due to electrostatic interaction. Subsequently, responsive nanoparticles showed a better plugging capacity of 93.3% to control CO₂ mobility, and more than 26% of the original oil was recovered. Moreover, the proposed responsive nanoparticles could revert oil-wet surfaces to water-wet, depending on surface adsorption to remove the oil from the surface of the rocks. The results of this work indicated that responsive nanoparticles might have potential applications for improved oil recovery in ultra-low permeability reservoirs.

Multistimuli-Responsive Pickering Emulsion Stabilized by Se-Containing Surfactant-Modified Chitosan

Particle-stabilized emulsions that can respond to external stimuli have attracted significant concerns due to their intelligent-controlled stability, whereas particle-stabilized Pickering emulsions responding to multistimuli but based on biomass have been rarely reported. Here, a multistimuli-responsive Pickering emulsion was developed using the modified chitosan as stabilizer. Due to electrostatic attraction, Se-containing anionic surfactant, sodium 11-(butylselenyl)undecylsulfate (C₄SeC₁₁S), can bind with CS at an acidic pH and form CS-C₄SeC₁₁S complexes which can further self-associate to form micrometer-sized particles with the character of partially hydrophobicity. Therefore, at pH < pK_a, an oil-in-water Pickering emulsion can be formed using CS-C₄SeC₁₁S particles as stabilizers and can spontaneously respond to redox, ion, and pH. First, with the addition of oxidation, the hydrophilicity of C₄SeC₁₁S was enhanced, and thus, hydrophobic association of CS-C₄SeC₁₁S decreased, leading to the disruption of CS-C₄SeC₁₁S particles. Hence, the emulsion destabilized. The demulsification process is closely related with the dosage of oxidant and the oxidation time. Second, introduction of a competitive ion (e.g., CTAB) could break the binding between C₄SeC₁₁S and CS, leading to the disruption of particle emulsifier. Thereby, demulsification occurred. Third, with sequentially increasing/decreasing pH, the emulsion can be switched from stable to unstable and then to stable again accordingly. Such a unique pH-responsive behavior has never been discovered in other pH-responsive Pickering emulsions. All of the stimuli-responsive behaviors were reversible. Upon alternately adding oxidant/reductant, CTAB/C₄SeC₁₁S, or base/acid, the current emulsion can be reversibly switched off (destabilization) and on (stabilization). Such a Pickering emulsion may be a good candidate as a vehicle of functional ingredient.

Redox-Responsive Pickering Emulsions Based on Silica Nanoparticles and Electrochemical Active Fluorescent Molecules

In this paper, we report a novel redox-responsive water-in-oil Pickering emulsion stabilized by negatively charged silica nanoparticles in combination with a trace amount of redox switchable fluorescent molecule ferrocene azine (FcA), in which ferrocene serves as a redox-sensitive group and anthryl unit serves as a fluorescence emission center. By alternately adding oxidants and reducing agents at a moderate condition, the amphiphilicity of silica nanoparticles changes because of the adsorption of Fc⁺A and the desorption of FcA on the silica surface. On the one hand, the stability of emulsions can be transformed between stable and unstable at ambient temperature via redox trigger and the regulation process can be cycled at least three times. On the other hand, the fluorescent intensity of the FcA molecule can be regulated by redox stimuli; thus, the change in fluorescent behavior of the emulsion droplets is observed upon redox cycles, which makes it useful in the fluorescent label of stimuli-responsive Pickering emulsions. This work provides a deep understanding of the regulation mechanism of Pickering emulsions upon redox stimuli and opens the new way for in situ fluorescent label of stimulus-responsive Pickering emulsions without introducing additional fluorescent molecules.

Interfacial self-assembly of gold nanoparticle-polymer nanoconjugates into microcapsules with near-infrared light modulated biphasic catalysis efficiency

Gold nanoparticle-based microcapsules based on the interfacial assembly significantly enhanced the biphasic catalytic reaction rate upon near-infrared light irradiation.

CO2-Responsive Pickering Emulsions Stabilized by a Bio-based Rigid Surfactant with Nanosilica

A novel CO₂-responsive surfactant, maleopimaric acid glycidyl methacrylate ester 3-(dimethylamino)propylamine imide (MPAGN), based on sustainable resource of rosin was synthesized and used to prepare a kind of CO₂-responsive Pickering emulsions with nanosilica. MPAGN can be reversibly responsive to CO₂ and N₂ between active cationic (MPAGNH⁺) and inactive nonionic (MPAGN), leading to adsorb on or desorb from the surface of nanosilica, then stabilize or break emulsion. CO₂-responsive behavior of MPAGN was verified by cycle change of pH and conductivity with bubbling CO₂ and N₂ alternately. The type of adsorption of MPAGNH⁺ at the particle-water interface was explained according to the adsorption isotherms. The mechanisms of stabilization, destabilization, and restabilization of Pickering emulsion were analyzed according to zeta potentials and droplet size. This Pickering emulsion can be reversible between stable and unstable by bubbling CO₂ and N₂ alternately. Moreover, this emulsifier can be recycled when new oil was added after removing the initial oil. Therefore, it not only has economic benefits but also has an environmentally friendly property.

Dynamic Covalent Silica Nanoparticles for pH-Switchable Pickering Emulsions

Dynamic covalent surfactants have been recently reported for preparation of pH-switchable emulsions [ Sun , D. Langmuir , 2017 , 33 , 3040 ]. In this study, dynamic covalent silica (SiO₂-B) nanoparticles of switchable wettability were fabricated by a pH-responsive dynamic (covalent) imine bond between hydrophilic amino silica (SiO₂-NH₂) nanoparticles and hydrophobic benzaldehyde molecules. The properties of SiO₂-B were characterized by Fourier transform infrared spectroscopy, elemental analysis, contact angle measurement, and ζ potential measurement. The hydrophilicity and hydrophobicity of SiO₂-B were shown to be readily switchable by adjusting pH between 7.8 and 3.5. At pH 7.8, SiO₂-B was partially hydrophobic and adsorbed at oil-water interface to stabilize O/W Pickering emulsions, which were characterized by electrical conductivity, optical microscopy, and confocal laser scanning microscopy. Upon lowering the pH to 3.5, the dynamic covalent bond is dissociated to convert partially hydrophobic SiO₂-B into highly hydrophilic SiO₂-NH₂ and surface-inactive benzaldehyde. Both of them desorb from oil-water interface, resulting in a rapid oil-water separation of the Pickering emulsions. Alternating stabilization and phase separation of the Pickering emulsions over 3 cycles were demonstrated by adjusting the pH. The pH-switchable Pickering emulsions show great potential in application to effective oil-water separation of emulsions.

Visible Light-Controlled Inversion of Pickering Emulsions Stabilized by Functional Silica Microspheres

A new class of donor-acceptor Stenhouse adduct (DASA)-functionalized silica microspheres (SMs) is designed and described to formulate Pickering emulsions with inversion property and large polarity change upon visible light irradiation. By tuning the hydrophilicity of the functional SM particles with visible light, these Pickering emulsions can easily perform inversion from water-in-oil to oil-in-water. The inversion performance of the emulsions is ascribed to DASA photoisomerization from an extended, hydrophobic, and intensely purple-colored triene to a compact, zwitterionic, and colorless cyclopentenone upon irradiation with visible light. This unique inversion behavior has been applied to control encapsulation and the release of fluorescein sodium salt.

Pickering Emulsion Formation of Paraffin Wax in an Ethanol-Water Mixture Stabilized by Primary Polymer Particles and Wax Microspheres Thereof

Stable dispersions of paraffin wax droplets and their nano- and microspheres have broad applications. Despite intensive efforts, the production of uniform wax spheres remains a challenge. For their preparation, abundant surfactants and other additives are commonly used to stabilize the dispersions. These additives are hardly removable and entrain often adverse consequence in many applications, particularly in biological and medical applications, where microspheres with absolutely clean surface are preferred. We report here a novel process to prepare stable dispersion of wax droplets in a water-ethanol mixture with a narrow size distribution by simply shaking without any surfactants. The process is featured by using primary polymer particles (PPs) of poly(dodecene-trihydroxymethylpropane triacrylate) as a Pickering stabilizer. PPs were prepared by precipitation polymerization without any surfactant and stabilizer. By rapidly cooling the wax emulsion, solid wax spheres with good uniformity were obtained. Their size, between 50 and 480 μm, was easily adjustable by changing the shaking rate, number of PPs, and particularly the size of PPs. The morphology of the wax spheres was examined by SEM, which showed that they were covered by a layer of PPs. The formation mechanism of the microspheres was also discussed on the basis of the adsorption energy of PPs on wax spheres, estimated from the corresponding contact angle of the solvent toward the PPs and the wax. This paper presents a novel pathway for the preparation of wax microspheres with only polymer particles without the need for any other additives.

CO2 and Redox Dual Responsive Pickering Emulsion

Herein, we described for the first time a CO₂ and redox dual responsive paraffin oil-in-water Pickering emulsion stabilized by the modified silica nanoparticles with Se-containing tertiary amine, SeTA, in which the tertiary amine serves as a CO₂-sensitive group, and the Se atom serves as a redox-sensitive center. The Pickering emulsion can be reversibly switched between stable and unstable states by bubbling CO₂ and N₂ in the reduced state, or with the addition of H₂O₂ and Na₂SO₃ in the absence of CO₂, because of the adsorption and desorption of SeTA on the silica surface. The former is mainly attributed to a CO₂-controllable electrostatic attraction, resulting from the transition of molecules between cationic and nonionic states; whereas, the latter is ascribed to a redox-tunable hydrogen bonding, originating from the transition of molecules between selenide and selenoxide. However, in the presence of CO₂, redox can only induce a change in the droplet size, not demulsification. These interesting and unique multiresponsive behaviors endow the Pickering emulsion with a capacity for intelligent control of emulsification and demulsification, as well as the droplet size, which may be an asset for a myriad of technological applications in biomedicine, microfluidics, drug delivery, and cosmetics.