Molecular Architecture Studied by the Surface Forces Measurement

Surface forces measurement for materials science

This article reviews the surface forces measurement as a novel tool for materials science. The history of the measurement is briefly described in the Introduction. The general overview covers specific features of the surface forces measurement as a tool for studying the solid-liquid interface, confined liquids and soft matter. This measurement is a powerful way for understanding interaction forces, and for characterizing (sometime unknown) phenomena at solid-liquid interfaces and soft complex matters. The surface force apparatus (SFA) we developed for opaque samples can study not only opaque samples in various media, but also electrochemical processes under various electrochemical conditions. Electrochemical SFA enables us to determine the distribution of counterions between strongly bound ones in the Stern layer and those diffused in the Gouy-Chapman layer. The shear measurement is another active area of the SFA research. We introduced a resonance method, i.e. the resonance shear measurement (RSM), that is used to study the effective viscosity and lubricity of confined liquids in their thickness from μm to contact. Advantages of these measurements are discussed by describing examples of each measurement. These studies demonstrate how the forces measurement is used for characterizing solid-liquid interfaces, confined liquids and reveal unknown phenomena. The readers will be introduced to the broad applications of the forces measurement in the materials science field.

Low-Temperature Surface Forces Apparatus to Determine the Interactions between Ice and Silica Surfaces

We have developed a low-temperature surface forces apparatus (SFA) using a thermoelectric Peltier module inserted below the bottom surface of the lower sample holder, giving easy access to the samples and allowing quick temperature changes. In air, the temperature can be decreased to ca. -20 °C. To demonstrate the performance of the apparatus, we measured the interactions between ice and a silica surface at -11.5 ± 0.5 °C. An exponentially decaying repulsion of the decay length, 11.2 ± 1.0 nm, was observed, and attributed to the electric double layer (EDL) repulsion. The surface potential of the ice was calculated to be -35 mV by fitting the data to the EDL model.

Preparation of stable silica surfaces for surface forces measurement

A surface forces apparatus (SFA) measures the forces between two surfaces as a function of the surface separation distance. It is regarded as an essential tool for studying the interactions between two surfaces. However, sample surfaces used for the conventional SFA measurements have been mostly limited to thin (ca. 2-3 μm) micas, which are coated with silver layers (ca. 50 nm) on their back, due to the requirement of the distance determination by transmission mode optical interferometry called FECO (fringes of equal chromatic order). The FECO method has the advantage of determining the absolute distance, so it should be important to increase the availability of samples other than mica, which is chemically nonreactive and also requires significant efforts for cleaving. Recently, silica sheets have been occasionally used in place of mica, which increases the possibility of surface modification. However, in this case, the silver layer side of the sheet is glued on a cylindrical quartz disc using epoxy resin, which is not stable in organic solvents and can be easily swollen or dissolved. The preparation of substrates more stable under severe conditions, such as in organic solvents, is necessary for extending application of the measurement. In this study, we report an easy method for preparing stable silica layers of ca. 2 μm in thickness deposited on gold layers (41 nm)/silica discs by sputtering, then annealed to enhance the stability. The obtained silica layers were stable and showed no swelling in organic solvents such as ethanol and toluene.