pH-Dependent Ordered Fibrinogen Adsorption on Polyethylene Single Crystals

How Crystallographic Orientation-Induced Fibrinogen Conformation Affects Platelet Adhesion and Activation on TiO2

Control of protein adsorption is essential for successful integration of healthcare materials into the body. Human plasma fibrinogen (HPF), especially its conformation is a key upstream regulator for platelet behavior and thus pathological clot formation at the blood-biomaterial interface. A previous study by the authors revealed that the conformation of adsorbed HPF can be controlled by rutile surface crystallographic orientation. Therefore, it is hypothesized that pre-adsorbed HPF on specific rutile orientation can regulate platelets adhesion and activation. Here, it is shown that platelets exposed to the four low index (110), (100), (101), (001) facets of TiO2 (rutile) exhibit surface-specific behavior. Scanning electron microscopy (SEM) observations of platelets morphology and P-selectin expression measurement revealed that on (110) facets, platelets adhesion and activation are suppressed. In contrast, extensive surface coverage by fully activated platelets is observed on (001) facets. Platelets' behavior has been linked to the HPF conformation and thereby availability of platelet-binding sequences. Atomic force microscopy (AFM) imaging supported by immunochemical analysis shows that on (110) facets, HPF is adsorbed in trinodular conformation rendering the γ400-411 platelet-binding sequence inaccessible. This research has potential implications on the bioactivity of different materials crystal facets, reducing the risk of pathological clot formation and thromboembolic complications.

Rutile facet-dependent fibrinogen conformation: Why crystallographic orientation matters

Previous studies implied that single crystalline rutile surfaces have the ability to guide the functionality of adsorbed blood plasma proteins. However, a clear relation between the rutile crystallographic orientation and conformation of adsorbed proteins is still missing. Here, we examine the adsorption characteristics of human plasma fibrinogen (HPF) on atomically flat single rutile crystals with (110), (100), (101) and (001) facets. By direct visualization of individual protein molecules through atomic force microscopy (AFM) imaging, the distinct conformations of HPF were determined depending on rutile surface crystallographic orientation. In particular, dominant trinodular and globular conformation was found on (110) and (001) facets, respectively. The observed variations of HPF conformation were reasoned from the surface water contact angle and surface energy point of view. By analyzing AFM-based force measurements, statistically significant changes in surface energies of rutile surfaces covered with HPF were determined and linked to HPF conformation. Furthermore, the facet-dependent structural rearrangement of HPF was indirectly confirmed through deconvolution of high-resolution X-ray photoelectron spectroscopy (XPS) carbon and nitrogen spectra. The globular, and thus native-like HPF conformation observed on (001) facet, was reflected in the lowest level of amino group formation. We propose that the mechanism behind the crystallographic orientation-induced HPF conformation is driven by the facet-specific surface hydrophilicity and energy. From the biomedical material perspective, our results demonstrate that the conformation of HPF can be guided by controlling the crystallographic orientation of the underlying material surface. This might be beneficial to the field of titanium-based biomaterials design and development.

Influence of Divalent Metal Ions on the Precipitation of the Plasma Protein Fibrinogen

Fibrinogen nanofibers are very attractive biomaterials to mimic the native blood clot architecture. Previously, we reported the self-assembly of fibrinogen nanofibers in the presence of monovalent salts and have now studied how divalent salts influence fibrinogen precipitation. Although the secondary fibrinogen structure was significantly altered with divalent metal ions, morphological analysis revealed exclusively smooth fibrinogen precipitates. In situ monitoring of the surface roughness facilitated predicting the tendency of various salts to form fibrinogen fibers or smooth films. Analysis of the chemical composition revealed that divalent salts were removed from smooth fibrinogen films upon rinsing while monovalent Na⁺ species were still present in fibrinogen fibers. Therefore, we assume that the decisive factor controlling the morphology of fibrinogen precipitates is direct ion-protein contact, which requires disruption of the ion-surrounding hydration shells. We conclude that in fibrinogen aggregates, this mechanism is effective only for monovalent ions, whereas divalent ions are limited to indirect fibrinogen adsorption.

Principles of Fibrinogen Fiber Assembly In Vitro

Fibrinogen nanofibers hold great potential for applications in wound healing and personalized regenerative medicine due to their ability to mimic the native blood clot architecture. Although versatile strategies exist to induce fibrillogenesis of fibrinogen in vitro, little is known about the underlying mechanisms and the associated length scales. Therefore, in this manuscript the current state of research on fibrinogen fibrillogenesis in vitro is reviewed. For the first time, the manifold factors leading to the assembly of fibrinogen molecules into fibers are categorized considering three main groups: substrate interactions, denaturing and non-denaturing buffer conditions. Based on the meta-analysis in the review it is concluded that the assembly of fibrinogen is driven by several mechanisms across different length scales. In these processes, certain buffer conditions, in particular the presence of salts, play a predominant role during fibrinogen self-assembly compared to the surface chemistry of the substrate material. Yet, to tailor fibrous fibrinogen scaffolds with defined structure-function-relationships for future tissue engineering applications, it still needs to be understood which particular role each of these factors plays during fiber assembly. Therefore, the future combination of experimental and simulation studies is proposed to understand the intermolecular interactions of fibrinogen, which induce the assembly of soluble fibrinogen into solid fibers.

How Nanotopography-Induced Conformational Changes of Fibrinogen Affect Platelet Adhesion and Activation

The conformational state of adsorbed human plasma fibrinogen (HPF) has been recognized as the determinant factor in platelet adhesion and thrombus formation on blood-contacting biomaterials. Studies have highlighted the ability to control the HPF conformation merely by tailoring surface nanotopographical features. However, a clear relationship between the conformational changes of adsorbed HPF and the degree of platelet adhesion and activation achieved with different surface nanotopographies is still unclear. Here, we examined HPF assembly characteristics on nanostructured polybutene-1 (PB-1) surfaces with nanosized lamellar crystals (LCs), needle-like crystals (NLCs), and a nanostructured high-density polyethylene (HDPE) surface with shish-kebab crystals (SKCs), at a biologically relevant HPF concentration. By exposing the nanostructured surfaces with preadsorbed HPF to human platelets, significant differences in platelet response on LCs/SKCs and NLCs were identified. The former presented a uniform monolayer in the advanced stage of activation, whereas the latter exhibited minimal adhesion and the early stage of activation. Distinct platelet response was related to the postadsorption conformational changes in HPF, which were confirmed by topography-dependent shifts of the amide I band in attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis. Supported by atomic force microscopy (AFM) characterization, we propose that the mechanism behind the nanotopography-induced HPF conformation is driven by the interplay between the aspect ratios of polymeric crystals and HPF. From the biomedical perspective, our work reveals that surface structuring in a nanoscale size regime can provide a fine-tuning mechanism to manipulate HPF conformation, which can be exploited for the design of thromboresistant biomaterials surfaces.

Confinement of Candida Antarctica Lipase B in a Multifunctional Cyclodextrin-Derived Silicified Hydrogel and Its Application as Enzymatic Nanoreactor

Supramolecular hydrogels with a three-dimensional cross-linked macromolecular network have attracted growing scientific interest in recent years because of their ability to incorporate high loadings of bioactive molecules such as drugs, proteins, antibodies, peptides, and genes. Herein, we report a versatile approach for the confinement of Candida antarctica lipase B (CALB) within a silica-strengthened cyclodextrin-derived supramolecular hydrogel and demonstrate its potential application in the selective oxidation of 2,5-diformylfuran (DFF) to 2,5-furandicarboxylic acid (FDCA) under mild conditions. The enzymatic nanoreactor was deeply characterized using thermogravimetric analysis, Fourier transform infrared spectroscopy, N₂-adsorption, dynamic light scattering, UV-visible spectroscopy, transmission electron microscopy, scanning electron microscopy, and confocal laser scanning microscopy, while the reaction products were established on the basis of ¹H nuclear magnetic resonance spectroscopy combined with high-performance liquid chromatography. Our results revealed that while CALB immobilized in conventional sol-gel silica yielded exclusively 5-formylfuran-2-carboxylic acid (FFCA), confinement of the enzyme in the silicified hydrogel imparted a 5-fold increase in DFF conversion and afforded 67% FDCA yield in 7 h and almost quantitative yields in less than 24 h. The hierarchically interconnected pore structure of the host matrix was found to provide a readily accessible diffusion path for reactants and products, while its flexible hydrophilic-hydrophobic interface was extremely beneficial for the interfacial activation of the immobilized lipase.

On the relationship between structure and catalytic effectiveness in solid surface-immobilized enzymes: Advances in methodology and the quest for a single-molecule perspective

The integration of enzymes with solid materials is important in many biotechnological applications, including the use of immobilized enzymes for biocatalytic synthesis. The development of functional enzyme-material composites is restrained by the lack of molecular-level insight into the behavior of enzymes in confined, surface-near environments. Here, we review recent advances in surface-sensitive spectroscopic techniques that push boundaries for the determination of enzyme structure and orientation at the solid-liquid interface. We discuss recent evidence from single-molecule studies showing that analyses sensitive to the temporal and spatial heterogeneities in immobilized enzymes can succeed in disentangling the effects of conformational stability and active-site accessibility on activity. Different immobilization methods involve distinct trade-off between these effects, thus emphasizing the need for a holistic (systems) view of immobilized enzymes for the rational development of practical biocatalysts.

Surface Characteristics Control the Attachment and Functionality of (Chimeric) Avidin

The physical adsorption (physisorption) of proteins to surfaces is an important but incompletely understood factor in many biological processes and is of increasing significance in bionanotechnology as well. Avidin is an important protein because of strong avidin-biotin binding, which has been exploited in numerous applications. We have undertaken thorough experimentation on the physisorption of avidin, to chemically different flat surfaces of Si and graphite and also to the curved version of the latter, on multiwalled carbon nanotubes (MWNTs) of different diameters. The difference in the behavior of avidin on Si versus graphite is drastic; on Si, avidin deposits as single globular tetrameric units and maintains functionality, whereas on graphite, it forms irregular networks of two-layer thick filaments, where the first layer has lost its biological activity. On MWNTs, avidin also deposits as one-dimensional formations, or stripes, but these appear to order in a perpendicular arrangement to the MWNT axis. A better understanding of protein-surface interactions is essential for the development of robust and reliable methods for biofunctionalization of materials. This work also provides insights into the importance of the nanoscale surface architecture.

Nanoconfinement and Sansetsukon-like Nanocrawling Govern Fibrinogen Dynamics and Self-Assembly on Nanostructured Polymeric Surfaces

Surface nanostructures are increasingly more employed for controlled protein assembly on functional nanodevices, in nanobiotechnology, and in nanobiomaterials. However, the mechanism and dynamics of how nanostructures induce order in the adsorbed protein assemblies are still enigmatic. Here, we use single-molecule mapping by accumulated probe trajectories and complementary atomic force microscopy to shed light on the dynamic of in situ assembly of human plasma fibrinogen (HPF) adsorbed on nanostructured polybutene-1 (PB-1) and nanostructured polyethylene (PE) surfaces. We found a distinct lateral heterogeneity of HPF-polymer nanostructure interface (surface occupancy, residence time, and diffusion coefficient) that allow identifying the interplay between protein topographical nanoconfinement, protein diffusion mechanism, and ordered protein self-assembly. The protein diffusion analysis revealed high-diffusion polarization without correlation to the anisotropic friction characteristic of the polymer surfaces. This suggests that HPF molecules confined on the nanosized PB-1 needle crystals and PE shish-kebab crystals, respectively, undergo partial detachment and diffuse via a Sansetsukon-like nanocrawling mechanism. This mechanism is based on the intrinsic flexibility of HPF in the coiled-coil regions. We conclude that nanostructured surfaces that encourage this characteristic surface mobility are more likely to lead to the formation of ordered protein assemblies and may be useful for advanced nanobiomaterials.

Controlling Protein Adsorption through Nanostructured Polymeric Surfaces

The initial host response to healthcare materials' surfaces after implantation is the adsorption of proteins from blood and interstitial fluids. This adsorbed protein layer modulates the biological/cellular responses to healthcare materials. This stresses the significance of the surface protein assembly for the biocompatibility and functionality of biomaterials and necessitates a profound fundamental understanding of the capability to control protein-surface interactions. This review, therefore, addresses this by systematically analyzing and discussing strategies to control protein adsorption on polymeric healthcare materials through the introduction of specific surface nanostructures. Relevant proteins, healthcare materials' surface properties, clinical applications of polymer healthcare materials, fabrication methods for nanostructured polymer surfaces, amorphous, semicrystalline and block copolymers are considered with a special emphasis on the topographical control of protein adsorption. The review shows that nanostructured polymer surfaces are powerful tools to control the amount, orientation, and order of adsorbed protein layers. It also shows that the understanding of the biological responses to such ordered protein adsorption is still in its infancy, yet it has immense potential for future healthcare materials. The review, which is-as far as it is known-the first one discussing protein adsorption on nanostructured polymer surfaces, concludes with highlighting important current research questions.

Nanocrystal Width Controls Fibrinogen Orientation and Assembly Kinetics on Poly(butene-1) Surfaces

From the view of biomedical relevance, it is known that a specific arrangement of surface-immobilized human plasma fibrinogen (HPF) molecules is required to retain their biological functionality. Here, we demonstrate a topographical effect of chemically identical isotactic poly(butene-1) (iPB-1) semicrystalline nanostructures on the adsorption behavior, i.e., conformation change and orientation of HPF molecules. Using the distinct crystallization of iPB-1 under different shear conditions, polymer thin films consisting of needle-like crystals (NLCs) or shish-kebab crystals (SKCs) having lateral dimension, i.e., width, smaller than or comparable to the HPF major axis, respectively, were fabricated. The protein adsorption kinetic studies by quartz crystal microbalance with dissipation (QCM-D) revealed surface-dependent packing density and assembly configuration of HPF. High-resolution imaging disclosed a "side-on" protein adsorption and anisotropic network formation on the NLCs. With a 2-fold orientation analysis performed at both "single" protein and multiprotein levels, we quantitatively proved the preferential alignment of adsorbed HPF molecules with respect to the axial direction of the NLCs. Remarkably, the iPB-1 surface with SKCs perturbed the "end-to-end" protein-protein interactions and thus hindered the network formation. The distinguished adsorption behavior of HPF molecules on iPB-1 surfaces is explained by the physical effect of crystal width, which is additionally supported by the synergistic effect of crystal curvature and aspect ratio. Our studies provide fundamental insight into purely topography-controlled self-assembly of HPF molecules, which might be further exploited in creating topographically defined implant surfaces for preventing protein aggregation related disorders.