Impact of Compressibility on the Control of Bubble-Pressure Tensiometers

A new instrument for interfacial dilational rheology

We present a new design for an interfacial dilational rheometer that can generate oscillatory dilational strain on a planar air-liquid interface. The strain is generated by a pneumatic mechanism involving a deformable film, which forms a circular barrier that can contract or expand under different pressures. The interfacial stress is measured using a Wilhelmy rod. We carefully examine and demonstrate the effects of potential sources of measurement error, including inertia, drag, buoyancy, flow from the bulk phase, and surface waves. The design avoids mixed deformations present in other instruments and is currently capable of accurate measurements at frequencies up to ∼0.1 Hz and dilational strains below 0.001, with potential for higher frequencies after further theoretical development. We demonstrate the integration of the interfacial dilational rheometer with a Langmuir trough by measuring the compression isotherm of an insoluble surfactant, stearic acid. Furthermore, we verify the capability of the interfacial dilational rheometer to perform frequency and amplitude sweeps and present the storage and loss moduli for a water-soluble surfactant, sodium dodecylbenzenesulfonate, at different concentrations.

Single bubble and drop techniques for characterizing foams and emulsions

The physics of foams and emulsions has traditionally been studied using bulk foam/emulsion tests and single film platforms such as the Scheludko cell. Recently there has been a renewed interest in a third class of techniques that we term as single bubble/drop tests, which employ isolated whole bubbles and drops to probe the characteristics of foams and emulsions. Single bubble and drop techniques provide a convenient framework for investigating a number of important characteristics of foams and emulsions, including the rheology, stabilization mechanisms, and rupture dynamics. In this review we provide a comprehensive discussion of the various single bubble/drop platforms and the associated experimental measurement protocols including the construction of coalescence time distributions, visualization of the thin film profiles and characterization of the interfacial rheological properties. Subsequently, we summarize the recent developments in foam and emulsion science with a focus on the results obtained through single bubble/drop techniques. We conclude the review by presenting important venues for future research.

Bubble Coalescence at Wormlike Micellar Solution-Air Interfaces

Surfactants in aqueous solutions self-assemble in the presence of salt, to form long, flexible, wormlike micelles (WLM). WLM solutions exhibit viscoelastic properties and are used in many applications, such as for cosmetic products, drag reduction, and hydraulic fracturing. Understanding the coalescence stability of bubbles in WLM solutions is important for the development of WLM based products that require a stable dispersion of bubbles. In this paper, we investigate the thin film drainage dynamics leading up to the coalescence of bubbles at flat WLM solution-air interfaces. The salts and surfactant type and concentrations were chosen so as to have the viscoelastic properties of the tested WLM solutions span over 2 orders of magnitude in moduli and relaxation times. The various stages in drainage and coalescence, the formation of a thick region at the apex (a dimple), the thinning and washout of this dimple, and the final stages of drainage before rupture, are modified by the viscoelasticity of the wormlike micellar solutions. As a result of the unique viscoelastic properties of the WLM solutions, we also observe a number of interesting fluid dynamic phenomena during the drainage processes including elastic recoil, thin film ripping, and single-step terminal drainage.

Hyperspectral imaging for dynamic thin film interferometry

Dynamic thin film interferometry is a technique used to non-invasively characterize the thickness of thin liquid films that are evolving in both space and time. Recovering the underlying thickness from the captured interferograms, unconditionally and automatically is still an open problem. Here we report a compact setup employing a snapshot hyperspectral camera and the related algorithms for the automated determination of thickness profiles of dynamic thin liquid films. The proposed technique is shown to recover film thickness profiles to within 100 nm of accuracy as compared to those profiles reconstructed through the manual color matching process. Subsequently, we discuss the characteristics and advantages of hyperspectral interferometry including the increased robustness against imaging noise as well as the ability to perform thickness reconstruction without considering the absolute light intensity information.

Evaporation-induced foam stabilization in lubricating oils

Foaming in liquids is ubiquitous in nature. Whereas the mechanism of foaming in aqueous systems has been thoroughly studied, nonaqueous systems have not enjoyed the same level of examination. Here we study the mechanism of foaming in a widely used class of nonaqueous liquids: lubricant base oils. Using a newly developed experimental technique, we show that the stability of lubricant foams can be evaluated at the level of single bubbles. The results obtained with this single-bubble technique indicate that solutocapillary flows are central to lubricant foam stabilization. These solutocapillary flows are shown to originate from the differential evaporation of multicomponent lubricants-an unexpected result given the low volatility of nonaqueous liquids. Further, we show that mixing of some combinations of different lubricant base oils, a common practice in the industry, exacerbates solutocapillary flows and hence leads to increased foaming.

Monoclonal Antibody Interfaces: Dilatation Mechanics and Bubble Coalescence

Monoclonal antibodies (mAbs) are proteins that uniquely identify targets within the body, making them well-suited for therapeutic applications. However, these amphiphilic molecules readily adsorb onto air-solution interfaces where they tend to aggregate. We investigated two mAbs with different propensities to aggregate at air-solution interfaces. The understanding of the interfacial rheological behavior of the two mAbs is crucial in determining their aggregation tendency. In this work, we performed interfacial stress relaxation studies under compressive step strain using a custom-built dilatational rheometer. The dilatational relaxation modulus was determined for these viscoelastic interfaces. The initial value and the equilibrated value of relaxation modulus were larger in magnitude for the mAb with a higher tendency to aggregate in response to interfacial stress. We also performed single-bubble coalescence experiments using a custom-built dynamic fluid-film interferometer (DFI). The bubble coalescence times also correlated to the mAbs aggregation propensity and interfacial viscoelasticity. To study the influence of surfactants in mAb formulations, polyethylene glycol (PEG) was chosen as a model surfactant. In the mixed mAb/PEG system, we observed that the higher aggregating mAb coadsorbed with PEG and formed domains at the interface. In contrast, for the other mAb, PEG entirely covered the interface at the concentrations studied. We studied the mobility of the interfaces, which was manifested by the presence or the lack of Marangoni stresses. These dynamics were strongly correlated with the interfacial viscoelasticity of the mAbs. The influence of competitive destabilization in affecting the bubble coalescence times for the mixed mAb/PEG systems was also studied.